Materials: Difference between revisions

From Intelligent Materials and Systems Lab
No edit summary
Line 1: Line 1:
== Our vision, goal and what we do ==
==Goal and motivation of IMS-Materials==


Siia tuleb sissejuhatav tekst ja sellele järgneb alajaotus teemade kaupa
Increasing requirements to the properties of new materials challenge to develop novel materials and find new approaches for their fabrication. IMS-Materials is focused on development of materials and in addition to academic basic research, in collaboration with industry, applied and contract research is carried out.


* Electroactive polymers (Tarmo, Urmas)
==Highlights==
* Ionic liquids (Kaija)
 
* Microfabrication (Anna-Liisa)
==Capabilities==
* Energy harvest and flow capacitors (Janno)
All steps from materials development to device design and fabrication are covered
* Indrek?


== Tools we use ==
===Equipment===


All steps from materials development to device design and fabrication are covered:
* potentiostats/galvanostats/frequenzy analyzers
* potentiostats/galvanostats/frequenzy analyzers
* SEM equipped with EDX
* SEM equipped with EDX
* FT-IR spectrometer
* FT-IR spectrometer
* KF titrator
* KF titrator
* dynamic mechanical analysis tool
* chemistry lab equipped for organic synthesis
* chemistry lab equipped for organic synthesis
* glove box
* glove box
* .....
* planetary ball mill
<!-- This is end of section -->
* spin-coater
* R&D micro-printing system
* hot-rolling press


== Research Projects ==
===Skills===


=== Ongoing Activities ===
* Electroactive polymers (Tarmo, Urmas)
Igaüks, kellel on projekt, võiks hoolitseda selle eest, et see siin kajastuks
* Ionic liquids (Kaija)
 
* Microfabrication (Anna-Liisa)
==== Basic Research ====
* Energy harvest and flow capacitors (Janno)
* [[IUT 2024 - Stimuli-Responsive Smart Polymer Composite Materials and their Applications in Lab-on chip Devices and in Robotics]]
* Indrek?
 
==== Applied & Contract Research ====
* [[LLTTI17205 - Non-combustible mouldable silicone foams for public transportation seat upholstery ]]
* [[LLTTI17114 - "Development of reinforced porous concrete" ]]
 
=== Past projects ===
 
==== Basic research ====
* [[MOBTP 10 - Developmnt of biocompatible ionic electromechanically active polymer actuator (01.01.2017 - 31.12.2017)]]
* [[ETF9236 - "Development and characterization of conducting polymer based composite materials for electromechanical applications"]] (1.01.2012−31.12.2015)
* [[ETF7533 - "Design of conducting polymers of specific properties for promising applications" ]] (1.01.2008−31.12.2011)
* [[ETF5830 - "Modeling of the specific properties of concuting polymers of technological interest"]] (1.01.2004−31.12.2007)"
 
==== Applied & Contract Research ====
* [["Soft materials for miniaturizable wearable sensory and feedback application in sports and rehabilitation ]] (01.09.2012 - 30.06.2015)
* [["Toodetavate kinga- ja saapapaelte kvaliteedi parendamisele suunatud järeltöötlemistehnoloogiate väljatöötamine"]] (1.03.2012−30.10.2014)
* [["Scannersock]] (15.01.2016−30.04.2016)
* [["Analysis of corroding ship tubing"]](4.04.2016−31.05.2016)
* ....
 
=== Student projects  ===
* [[Ioonsed vedelikud elektroatiivsete polümeeride jaoks]]
* [[Bioühilduvad elektroaktiivsed polümeerid]]
* ....
<!-- This is end of section -->


== Members ==
== Members ==
Line 65: Line 41:
}}
}}


 
==Student projects==
=== PhD students ===
<!-- Lisada link vastavale wiki lehele -->
(igaüks hoolitseb, et tema omad kirjas oleks)
* [[Ioonsed vedelikud elektroatiivsete polümeeride jaoks]]
 
* [[Bioühilduvad elektroaktiivsed polümeerid]]
* Fred Elhi
* ....
* Pille Rinne
* Karl Karu
* Kadi-Anne Küppar
* Kaur Leemets
* Alo Kivilo
* Hans Priks
 
=== Friends and collaborators ===
<!-- This is end of section -->
<!-- This is end of section -->


==Publications==
==Portfolio==
<!-- This is end of section -->


==Defended theses==
===Selected projects===
<!-- Igaüks, kellel on käimasolev projekt, võiks hoolitseda selle eest, et see siin kajastuks -->


=== PhD Theses ===
==== Basic Research ====
* Rauno Temmer - "Electrochemistry and nolvel applications of chemically synthesized conductive polymer electrodes" 2014
* [[IUT 2024 - Stimuli-Responsive Smart Polymer Composite Materials and their Applications in Lab-on chip Devices and in Robotics]]-ongoing
* A-L PUT-ongoing
* [[MOBTP 10 - Developmnt of biocompatible ionic electromechanically active polymer actuator (01.01.2017 - 31.12.2017)]]
* [[ETF9236 - "Development and characterization of conducting polymer based composite materials for electromechanical applications"]] (1.01.2012−31.12.2015)
* [[ETF7533 - "Design of conducting polymers of specific properties for promising applications" ]] (1.01.2008−31.12.2011)
* [[ETF5830 - "Modeling of the specific properties of concuting polymers of technological interest"]] (1.01.2004−31.12.2007)


=== Master's Theses ===
==== Applied & Contract Research ====
* Kadi-Anne Küppar - "Preparation and characterization of biopolymer membranes for electroactive polymers" 2017
* [[LLTTI17205 - Non-combustible mouldable silicone foams for public transportation seat upholstery ]]-ongoing
* Sagar Ramanbhai Patel - "Development of foreign body detection methodology in industrial food preparation process" 2016
* [[LLTTI17114 - "Development of reinforced porous concrete" ]]-ongoing
* Paul Jaakson - "Encapsulation of ionic electroactive polymer-composites" 2016
* [["Soft materials for miniaturizable wearable sensory and feedback application in sports and rehabilitation ]] (01.09.2012 - 30.06.2015)
* Hans Priks - "Polypyrrole as a microbial fuel cells electrode material" 2016
* [["Toodetavate kinga- ja saapapaelte kvaliteedi parendamisele suunatud järeltöötlemistehnoloogiate väljatöötamine"]] (1.03.2012−30.10.2014)
* Kätlin Rohtlaid - "Ion mobility in polypyrrole actuators" 2015
* [["Scannersock]] (15.01.2016−30.04.2016)
* [["Analysis of corroding ship tubing"]](4.04.2016−31.05.2016)


=== Bachelor's theses ===
===Selected publications===
* Markus Otsus - "Relations Between the Structure and Compressive Strength of Autoclaved Aerated Concrete" 2017
<!-- This is end of section -->


<!-- This is end of section -->


[[Category:IMS-materials]]
[[Category:IMS-materials]]

Revision as of 18:56, 11 September 2019

Goal and motivation of IMS-Materials

Increasing requirements to the properties of new materials challenge to develop novel materials and find new approaches for their fabrication. IMS-Materials is focused on development of materials and in addition to academic basic research, in collaboration with industry, applied and contract research is carried out.

Highlights

Capabilities

All steps from materials development to device design and fabrication are covered

Equipment

  • potentiostats/galvanostats/frequenzy analyzers
  • SEM equipped with EDX
  • FT-IR spectrometer
  • KF titrator
  • dynamic mechanical analysis tool
  • chemistry lab equipped for organic synthesis
  • glove box
  • planetary ball mill
  • spin-coater
  • R&D micro-printing system
  • hot-rolling press

Skills

  • Electroactive polymers (Tarmo, Urmas)
  • Ionic liquids (Kaija)
  • Microfabrication (Anna-Liisa)
  • Energy harvest and flow capacitors (Janno)
  • Indrek?

Members

Tarmo Tammsenior research fellow (materials chemistry, polymeric materials)
Urmas Johansonresearcher (electrochemistry)
Kaija Põhako-Eskoresearcher, Marie Skłodowska-Curie fellow (chemistry, organic synthesis, ionic liquids)
Anna-Liisa Peikolainenresearcher (carbon materials, chemistry)
Janno Toropresearcher (flow cell supercaps, carbon materials)
Indrek Mustassociate professor

Student projects

Portfolio

Selected projects

Basic Research

Applied & Contract Research

Selected publications

Retrieved from "https://ims.ut.ee/index.php?title=Materials&oldid=20337"