User:Alvo: Difference between revisions

Revision as of 15:05, 7 May 2023

{{UserProfile | fullname=Alvo Aabloo | picture=DSCN2681.JPG | mobile=+372 507-8356 | email=alvo.aabloo@ut.ee | researcherid=C-5639-2011 | orcid=0000-0002-0183-1282 | gscholar=http://scholar.google.com/citations?user=3qPl47IAAAAJ&hl=en&oi=ao | etis=https://www.etis.ee/CV/Alvo_Aabloo/eng | other=

IEEE Member

96854054

Visiting and postal address

IMS Lab
Institute of Technology
Tartu University
Nooruse 1
50411 Tartu
Estonia

Calendar

Very useful timeslot finder for arranging appointment with me or for me :)

Administrative Responsibilities

Leader of Intelligence Materials and Systems Lab

Other Activities

Robotics For Education

Publications

Journal Articles

Ville Jansson, Andreas Kyritsakis, Simon Vigonski, Ekaterina Baibuz, Vahur Zadin, Alvo Aabloo, Flyura Djurabekova (2020) Tungsten migration energy barriers for surface diffusion: a parameterization for KMC simulations, Modelling and Simulation in Materials Science and Engineering. https://doi.org/10.1088/1361-651X/ab7151
Nakshatharan, S.S., Martinez, J.G., Punning, A., Aabloo, A., Jager, E.W.H. (2020) Soft parallel manipulator fabricated by additive manufacturing, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2019.127355
Tepljakov, A., Vunder, V., Petlenkov, E., Nakshatharan, S.S., Punning, A., Kaparin, V., Belikov, J., Aabloo, A. (2019) Fractional-order modeling and control of ionic polymer-metal composite actuator, Smart Materials and Structures. http://doi.org/10.1088/1361-665X/ab2c75
Rinne, P., Poldsalu, I., Johanson, U., Tamm, T., Pohako-Esko, K., Punning, A., Van Den Ende, D., Aabloo, A. (2019) Encapsulation of ionic electromechanically active polymer actuators, Smart Materials and Structures. http://doi.org/10.1088/1361-665X/ab18c0
Torop, J., Summer, F., Zadin, V., Koiranen, T., Jänes, A., Lust, E., Aabloo, A. (2019) Low concentrated carbonaceous suspensions assisted with carboxymethyl cellulose as electrode for electrochemical flow capacitor, European Physical Journal E. http://doi.org/10.1140/epje/i2019-11766-2
Must, I., Rinne, P., Krull, F., Kaasik, F., Johanson, U., Aabloo, A. (2019) Ionic Actuators as Manipulators for Microscopy, Frontiers in Robotics and AI. http://doi.org/10.3389/frobt.2019.00140
Sunjai Nakshatharan, S., Punning, A., Johanson, U., Aabloo, A. (2018) Effect of porosity and tortuosity of electrodes on carbon polymer soft actuators, Journal of Applied Physics. http://doi.org/10.1063/1.5007147
Nevstrueva, D., Murashko, K., Vunder, V., Aabloo, A., Pihlajamäki, A., Mänttäri, M., Pyrhönen, J., Koiranen, T., Torop, J. (2018) Natural cellulose ionogels for soft artificial muscles, Colloids and Surfaces B: Biointerfaces. http://doi.org/10.1016/j.colsurfb.2017.10.053
Metspalu, T., Jansson, V., Zadin, V., Avchaciov, K., Nordlund, K., Aabloo, A., Djurabekova, F. (2018) Cu self-sputtering MD simulations for 0.1–5 keV ions at elevated temperatures, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. http://doi.org/10.1016/j.nimb.2017.11.001
Põldsalu, I., Johanson, U., Tamm, T., Punning, A., Greco, F., Peikolainen, A.-L., Kiefer, R., Aabloo, A. (2018) Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes, Synthetic Metals. http://doi.org/10.1016/j.synthmet.2018.10.009
Veske, M., Kyritsakis, A., Eimre, K., Zadin, V., Aabloo, A., Djurabekova, F. (2018) Dynamic coupling of a finite element solver to large-scale atomistic simulations, Journal of Computational Physics. http://doi.org/10.1016/j.jcp.2018.04.031
Nakshatharan, S.S., Johanson, U., Punning, A., Aabloo, A. (2018) Modeling, fabrication, and characterization of motion platform actuated by carbon polymer soft actuator, Sensors and Actuators, A: Physical. http://doi.org/10.1016/j.sna.2018.09.054
Vigonski, S., Jansson, V., Vlassov, S., Polyakov, B., Baibuz, E., Oras, S., Aabloo, A., Djurabekova, F., Zadin, V. (2018) Au nanowire junction breakup through surface atom diffusion, Nanotechnology. http://doi.org/10.1088/1361-6528/aa9a1b
Leemets, K., Mäeorg, U., Aabloo, A., Tamm, T. (2018) Effect of contact material and ambient humidity on the performance of MWCNT/PDMS multimodal deformation sensors, Sensors and Actuators, A: Physical. http://doi.org/10.1016/j.sna.2018.09.042
Priimägi, P., Asfaw, H.D., Srivastav, S., Kasemägi, H., Aabloo, A., Brandell, D., Zadin, V. (2018) Modeling 3D-microbatteries based on carbon foams, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2018.05.179
S. Sunjai Nakshatharan, Veiko Vunder, Inga Põldsalu, Urmas Johanson, Andres Punning, Alvo Aabloo (2018) Modelling and Control of Ionic Electroactive Polymer Actuators under Varying Humidity Conditions, Actuators. https://doi.org/10.3390/act7010007
V Zadin, M Veske, S Vigonski, V Jansson, J Muszinsky, S Parviainen, A Aabloo, F Djurabekova (2018) Simulations of surface stress effects in nanoscale single crystals, Modelling and Simulation in Materials Science and Engineering. https://doi.org/10.1088/1361-651X/aaa928
Priimägi, P., Kasemägi, H., Aabloo, A., Brandell, D., Zadin, V. (2017) Thermal Simulations of Polymer Electrolyte 3D Li-Microbatteries, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2017.05.055
Béland, L.K., Tamm, A., Mu, S., Samolyuk, G.D., Osetsky, Y.N., Aabloo, A., Klintenberg, M., Caro, A., Stoller, R.E. (2017) Accurate classical short-range forces for the study of collision cascades in Fe–Ni–Cr, Computer Physics Communications. http://doi.org/10.1016/j.cpc.2017.05.001
Metsanurk, E., Tamm, A., Aabloo, A., Klintenberg, M., Caro, A. (2017) Vacancies at the Cu-Nb semicoherent interface, Modelling and Simulation in Materials Science and Engineering. http://doi.org/10.1088/1361-651X/25/2/025012
Kaasik, F., Must, I., Baranova, I., Põldsalu, I., Lust, E., Johanson, U., Punning, A., Aabloo, A. (2017) Scalable fabrication of ionic and capacitive laminate actuators for soft robotics, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2017.02.065
Nakshatharan, S.S., Punning, A., Aabloo, A. (2017) A neural network modeling and sliding mode control of self-sensing ionic polymer–metal composite actuator, Journal of Intelligent Material Systems and Structures. http://doi.org/10.1177/1045389X17733234
Zondaka, Z., Valner, R., Tamm, T., Aabloo, A., Kiefer, R. (2016) Carbide-derived carbon in polypyrrole changing the elastic modulus with a huge impact on actuation, RSC Advances. http://doi.org/10.1039/c6ra01511e
Tamm, A., Samolyuk, G., Correa, A.A., Klintenberg, M., Aabloo, A., Caro, A. (2016) Electron-phonon interaction within classical molecular dynamics, Physical Review B. http://doi.org/10.1103/PhysRevB.94.024305
Veske, M., Parviainen, S., Zadin, V., Aabloo, A., Djurabekova, F. (2016) Electrodynamics - Molecular dynamics simulations of the stability of Cu nanotips under high electric field, Journal of Physics D: Applied Physics. http://doi.org/10.1088/0022-3727/49/21/215301
Vunder, V., Hamburg, E., Johanson, U., Punning, A., Aabloo, A. (2016) Effect of ambient humidity on ionic electroactive polymer actuators, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/25/5/055038
Aabloo, A., De Luca, V., Di Pasquale, G., Graziani, S., Gugliuzzo, C., Johanson, U., Marino, C., Pollicino, A., Puglisi, R. (2016) A new class of ionic electroactive polymers based on green synthesis, Sensors and Actuators, A: Physical. http://doi.org/10.1016/j.sna.2016.08.009
Kiefer, R., Martinez, J.G., Kesküla, A., Anbarjafari, G., Aabloo, A., Otero, T.F. (2016) Polymeric actuators: Solvents tune reaction-driven cation to reaction-driven anion actuation, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2016.04.090
Priimägi, P., Brandell, D., Srivastav, S., Aabloo, A., Kasemägi, H., Zadin, V. (2016) Optimizing the design of 3D-pillar microbatteries using finite element modelling, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2016.05.047
Yanagisawa, H., Zadin, V., Kunze, K., Hafner, C., Aabloo, A., Kim, D.E., Kling, M.F., Djurabekova, F., Osterwalder, J., Wuensch, W. (2016) Laser-induced asymmetric faceting and growth of a nano-protrusion on a tungsten tip, APL Photonics. http://doi.org/10.1063/1.4967494
Stoller, R.E., Tamm, A., Béland, L.K., Samolyuk, G.D., Stocks, G.M., Caro, A., Slipchenko, L.V., Osetsky, Y.N., Aabloo, A., Klintenberg, M., Wang, Y. (2016) Impact of Short-Range Forces on Defect Production from High-Energy Collisions, Journal of Chemical Theory and Computation. http://doi.org/10.1021/acs.jctc.5b01194
Mets, M., Antsov, M., Zadin, V., Dorogin, L.M., Aabloo, A., Polyakov, B., Lõhmus, R., Vlassov, S. (2016) Structural factor in bending testing of fivefold twinned nanowires revealed by finite element analysis, Physica Scripta. http://doi.org/10.1088/0031-8949/91/11/115701
Zhu, Z., Chang, L., Horiuchi, T., Takagi, K., Aabloo, A., Asaka, K. (2016) Multi-physical model of cation and water transport in ionic polymer-metal composite sensors, Journal of Applied Physics. http://doi.org/10.1063/1.4944647
Punning, A., Vunder, V., Must, I., Johanson, U., Anbarjafari, G., Aabloo, A. (2016) In situ scanning electron microscopy study of strains of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures. http://doi.org/10.1177/1045389X15581520
Daneshmand, M., Aabloo, A., Ozcinar, C., Anbarjafari, G. (2016) Real-time, automatic shape-changing robot adjustment and gender classification, Signal, Image and Video Processing. http://doi.org/10.1007/s11760-015-0805-1
Daneshmand, M., Aabloo, A., Anbarjafari, G. (2015) Size-dictionary interpolation for robot's adjustment, Frontiers in Bioengineering and Biotechnology. http://doi.org/10.3389/fbioe.2015.00063
Zadin, V., Kasemägi, H., Valdna, V., Vigonski, S., Veske, M., Aabloo, A. (2015) Application of multiphysics and multiscale simulations to optimize industrial wood drying kilns, Applied Mathematics and Computation. http://doi.org/10.1016/j.amc.2015.01.104
Eimre, K., Parviainen, S., Aabloo, A., Djurabekova, F., Zadin, V. (2015) Application of the general thermal field model to simulate the behaviour of nanoscale Cu field emitters, Journal of Applied Physics. http://doi.org/10.1063/1.4926490
Kruusamäe, K., Punning, A., Aabloo, A., Asaka, K. (2015) Self-sensing ionic polymer actuators: A review, Actuators. http://doi.org/10.3390/act4010017
Tamm, A., Aabloo, A., Klintenberg, M., Stocks, M., Caro, A. (2015) Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys, Acta Materialia. http://doi.org/10.1016/j.actamat.2015.08.015
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. (2015) Ionic and capacitive artificial muscle for biomimetic soft robotics, Advanced Engineering Materials. http://doi.org/10.1002/adem.201400246
Kasemägi, H., Ollikainen, M., Brandell, D., Aabloo, A. (2015) Molecular Dynamics Modelling of Block-Copolymer Electrolytes with High t₊ Values, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2015.04.027
Plaado, M., Kaasik, F., Valner, R., Lust, E., Saar, R., Saal, K., Peikolainen, A.-L., Aabloo, A., Kiefer, R. (2015) Electrochemical actuation of multiwall carbon nanotube fiber with embedded carbide-derived carbon particles, Carbon. http://doi.org/10.1016/j.carbon.2015.07.077
Vigonski, S., Veske, M., Aabloo, A., Djurabekova, F., Zadin, V. (2015) Verification of a multiscale surface stress model near voids in copper under the load induced by external high electric field, Applied Mathematics and Computation. http://doi.org/10.1016/j.amc.2015.01.102
Aydemir, N., Kilmartin, P.A., Travas-Sejdic, J., Kesküla, A., Peikolainen, A.-L., Parcell, J., Harjo, M., Aabloo, A., Kiefer, R. (2015) Electrolyte and solvent effects in PPy/DBS linear actuators, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2015.03.098
Vigonski, S., Djurabekova, F., Veske, M., Aabloo, A., Zadin, V. (2015) Molecular dynamics simulations of near-surface Fe precipitates in Cu under high electric fields, Modelling and Simulation in Materials Science and Engineering. http://doi.org/10.1088/0965-0393/23/2/025009
Kiefer, R., Aydemir, N., Torop, J., Tamm, T., Temmer, R., Travas-Sejdic, J., Must, I., Kaasik, F., Aabloo, A. (2014) Carbide-derived carbon as active interlayer of polypyrrole tri-layer linear actuator, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2014.04.093
Torop, J., Arulepp, M., Sugino, T., Asaka, K., Jänes, A., Lust, E., Aabloo, A. (2014) Microporous and mesoporous carbide-derived carbons for strain modification of electromechanical actuators, Langmuir. http://doi.org/10.1021/la404616w
Kiefer, R., Temmer, R., Aydemir, N., Travas-Sejdic, J., Aabloo, A., Tamm, T. (2014) Electrochemistry of interlayer supported polypyrrole tri-layer linear actuators, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2013.10.043
Kilmartin, P.A., Travas-Sejdic, J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. (2014) PEDOT-PSS/MWCNT coatings on PET for conducting polymer actuators, International Journal of Nanotechnology. http://doi.org/10.1504/IJNT.2014.060568
Must, I., Vunder, V., Kaasik, F., Põldsalu, I., Johanson, U., Punning, A., Aabloo, A. (2014) Ionic liquid-based actuators working in air: The effect of ambient humidity, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2014.05.074
Vunder, V., Itik, M., Põldsalu, I., Punning, A., Aabloo, A. (2014) Inversion-based control of ionic polymer-metal composite actuators with nanoporous carbon-based electrodes, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/23/2/025010
Metsanurk, E., Tamm, A., Caro, A., Aabloo, A., Klintenberg, M. (2014) First-principles study of point defects at a semicoherent interface, Scientific Reports. http://doi.org/10.1038/srep07567
Palmre, V., Pugal, D., Kim, K.J., Leang, K.K., Asaka, K., Aabloo, A. (2014) Nanothorn electrodes for ionic polymer-metal composite artificial muscles, Scientific Reports. http://doi.org/10.1038/srep06176
Bläckberg, L., Metsanurk, E., Tamm, A., Aabloo, A., Klintenberg, M. (2014) Molecular dynamics study of xenon on an amorphous Al₂O ₃ surface, Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. http://doi.org/10.1016/j.nima.2014.03.044
Torop, J., Aabloo, A., Jager, E.W.H. (2014) Novel actuators based on polypyrrole/carbide-derived carbon hybrid materials, Carbon. http://doi.org/10.1016/j.carbon.2014.08.078
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. (2014) Ionic electroactive polymer artificial muscles in space applications, Scientific Reports. http://doi.org/10.1038/srep06913
Punning, A., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Kaasik, F., Torop, J., Rinne, P., Lulla, T., Johanson, U., Tamm, T., Aabloo, A. (2014) Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures. http://doi.org/10.1177/1045389X14546656
Zadin, V., Pohjonen, A., Aabloo, A., Nordlund, K., Djurabekova, F. (2014) Electrostatic-elastoplastic simulations of copper surface under high electric fields, Physical Review Special Topics - Accelerators and Beams. http://doi.org/10.1103/PhysRevSTAB.17.103501
Pugal, D., Solin, P., Kim, K.J., Aabloo, A. (2014) Hp-FEM electromechanical transduction model of ionic polymer-metal composites, Journal of Computational and Applied Mathematics. http://doi.org/10.1016/j.cam.2013.09.011
Brandell, D., Kasemägi, H., Tamm, T., Aabloo, A. (2014) Molecular dynamics modeling the Li-PolystyreneTFSI/PEO blend, Solid State Ionics. http://doi.org/10.1016/j.ssi.2013.09.039
Must, I., Anton, M., Viidalepp, E., Põldsalu, I., Punning, A., Aabloo, A. (2013) Mechanoelectrical impedance of a carbide-derived carbon-based laminate motion sensor at large bending deflections, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/22/10/104015
Brandell, D., Jõemetsa, S., Kasemägi, H., Aabloo, A. (2013) Molecular Dynamics modelling a small-molecule crystalline electrolyte: LiBF₄(CH₃O(CH₂CH₂O) ₄CH₃)_0.5, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2013.04.076
Kosidlo, U., Omastova, M., Micusik, M., Ciric-Marjanovic, G., Randriamahazaka, H., Wallmersperger, T., Aabloo, A., Kolaric, I., Bauernhansl, T. (2013) Nanocarbon based ionic actuators-a review, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/22/10/104022
Kaasik, F., Tamm, T., Hantel, M.M., Perre, E., Aabloo, A., Lust, E., Bazant, M.Z., Presser, V. (2013) Anisometric charge dependent swelling of porous carbon in an ionic liquid, Electrochemistry Communications. http://doi.org/10.1016/j.elecom.2013.06.011
Kiefer, R., Temmer, R., Tamm, T., Travas-Sejdic, J., Kilmartin, P.A., Aabloo, A. (2013) Conducting polymer actuators formed on MWCNT and PEDOT-PSS conductive coatings, Synthetic Metals. http://doi.org/10.1016/j.synthmet.2013.03.017
Temmer, R., Maziz, A., Plesse, C., Aabloo, A., Vidal, F., Tamm, T. (2013) In search of better electroactive polymer actuator materials: PPy versus PEDOT versus PEDOT-PPy composites, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/22/10/104006
Zadin, V., Brandell, D., Kasemägi, H., Lellep, J., Aabloo, A. (2013) Designing the 3D-microbattery geometry using the level-set method, Journal of Power Sources. http://doi.org/10.1016/j.jpowsour.2012.12.004
Kiefer, R., Weis, D.G., Aabloo, A., Urban, G., Heinze, J. (2013) Dependence of polypyrrole bilayer deflection upon polymerization potential, Synthetic Metals. http://doi.org/10.1016/j.synthmet.2013.04.003
Temmer, R., Kiefer, R., Aabloo, A., Tamm, T. (2013) Direct chemical synthesis of pristine polypyrrole hydrogels and their derived aerogels for high power density energy storage applications, Journal of Materials Chemistry A. http://doi.org/10.1039/c3ta13517a
Lee, R.-J., Tamm, T., Temmer, R., Aabloo, A., Kiefer, R. (2013) Two formation mechanisms and renewable antioxidant properties of suspensible chitosan-PPy and chitosan-PPy-BTDA composites, Synthetic Metals. http://doi.org/10.1016/j.synthmet.2012.12.032
Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. (2013) Renewable antioxidant properties of suspensible chitosan-polypyrrole composites, Reactive and Functional Polymers. http://doi.org/10.1016/j.reactfunctpolym.2013.04.003
Must, I., Johanson, U., Kaasik, F., Põldsalu, I., Punning, A., Aabloo, A. (2013) Charging a supercapacitor-like laminate with ambient moisture: From a humidity sensor to an energy harvester, Physical Chemistry Chemical Physics. http://doi.org/10.1039/c3cp51526e
Vahur Zadin, Dmitry Danilov, Daniel Brandell, Peter H.L. Notten, Alvo Aabloo (2012) Finite element simulations of 3D ionic transportation properties in Li-ion electrolytes, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2012.01.039
Janno Torop, Takushi Sugino, Kinji Asaka, Alar Jänes, Enn Lust, Alvo Aabloo (2012) Nanoporous carbide-derived carbon based actuators modified with gold foil: Prospect for fast response and low voltage applications, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2011.10.079
Rauno Temmer, Indrek Must, Friedrich Kaasik, Alvo Aabloo, Tarmo Tamm (2012) Combined chemical and electrochemical synthesis methods for metal-free polypyrrole actuators, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2012.01.075
Karl Kruusamäe, Andres Punning, Alvo Aabloo (2012) Electrical model of a carbon-polymer composite (CPC) collision detector, Sensors. http://doi.org/10.3390/s120201950
David Pugal, Pavel Solin, Kwang J. Kim, Alvo Aabloo (2012) Modeling ionic polymer-metal composites with space-time adaptive multimesh hp-FEM, Communications in Computational Physics. http://doi.org/10.4208/cicp.081110.180311a
Veiko Vunder, Andres Punning, Alvo Aabloo (2012) Mechanical interpretation of back-relaxation of ionic electroactive polymer actuators, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/21/11/115023
Endel Soolo, Daniel Brandell, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Alvo Aabloo (2012) Molecular dynamics simulations of EMI-BF 4 in nanoporous carbon actuators, Journal of Molecular Modeling. http://doi.org/10.1007/s00894-011-1182-5
Viljar Palmre, Janno Torop, Mati Arulepp, Takushi Sugino, Kinji Asaka, Alar Jänes, Enn Lust, Alvo Aabloo (2012) Impact of carbon nanotube additives on carbide-derived carbon-based electroactive polymer actuators, Carbon. http://doi.org/10.1016/j.carbon.2012.04.071
Torop, Janno (2012) Low-voltage bending actuators from carbide-derived carbon improved with gold foil, Electroactive Polymer Actuators and Devices (Eapad) 2012. http://doi.org/10.1117/12.915029
Indrek Must, Friedrich Kaasik, Inga Põldsalu, Urmas Johanson, Andres Punning, Alvo Aabloo (2012) A carbide-derived carbon laminate used as a mechanoelectrical sensor, Carbon. http://doi.org/10.1016/j.carbon.2011.09.010
Karl Kruusamäe, Andres Punning, Alvo Aabloo (2011) Self-sensing properties of carbon-polymer composite (CPC) actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.880386
David Pugal, Kwang J. Kim, Alvo Aabloo (2011) An explicit physics-based model of ionic polymer-metal composite actuators, Journal of Applied Physics. http://doi.org/10.1063/1.3650903
Friedrich Kaasik, Janno Torop, Anna-Liisa Peikolainen, Mihkel Koel, Alvo Aabloo (2011) Carbon aerogel based electrode material for EAP actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.880607
Karl Kruusamäe, Paola Brunetto, Andres Punning, Margus Kodu, Raivo Jaaniso, Salvatore Graziani, Luigi Fortuna, Alvo Aabloo (2011) Electromechanical model for a self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/20/12/124001
Daniel Brandell, Priit Priimägi, Heiki Kasemägi, Alvo Aabloo (2011) Branched polyethylene/poly(ethylene oxide) as a host matrix for Li-ion battery electrolytes: A molecular dynamics study, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2011.03.022
Heilo Altin, Margus Pedaste, Alvo Aabloo (2011) Educational robotics and inquiry learning: A pilot study in a web-based learning environment, Proceedings of the 2011 11th IEEE International Conference on Advanced Learning Technologies, ICALT 2011. http://doi.org/10.1109/ICALT.2011.72
Vahur Zadin, Daniel Brandell, Heiki Kasemägi, Alvo Aabloo, John O. Thomas (2011) Finite element modelling of ion transport in the electrolyte of a 3D-microbattery, Solid State Ionics. http://doi.org/10.1016/j.ssi.2010.02.007
Viljar Palmre, Enn Lust, Alar Jänes, Mihkel Koel, Anna-Liisa Peikolainen, Janno Torop, Urmas Johanson, Alvo Aabloo (2011) Electroactive polymer actuators with carbon aerogel electrodes, Journal of Materials Chemistry. http://doi.org/10.1039/c0jm01729a
Janno Torop, Viljar Palmre, Mati Arulepp, Takushi Sugino, Kinji Asaka, Alvo Aabloo (2011) Flexible supercapacitor-like actuator with carbide-derived carbon electrodes, Carbon. http://doi.org/10.1016/j.carbon.2011.03.034
D. Pugal, K. J. Kim, P. Solin, A. Aabloo (2011) A novel hp-FEM model for IPMC actuation, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.881487
V. Vunder, A. Punning, A. Aabloo (2011) Variable-focal lens using electroactive polymer actuator, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.880608
Karl Kruusamäe, Paola Brunetto, Salvatore Graziani, Andres Punning, Giovanna Di Pasquale, Alvo Aabloo (2010) Self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Polymer International. http://doi.org/10.1002/pi.2752
Karo, J (2010) Molecular Dynamics Modeling of Proton Transport in Nation and Hylton Nanostructures, Journal of Physical Chemistry B. http://doi.org/10.1021/jp903288y
Karl Kruusamäe, Paola Brunetto, Salvatore Graziani, Luigi Fortuna, Margus Kodu, Raivo Jaaniso, Andres Punning, Alvo Aabloo (2010) Experiments with self-sensing IPMC actuating device, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.847503
Daniel Brandell, Heiki Kasemägi, Alvo Aabloo (2010) Poly(ethylene oxide)-poly(butadiene) interpenetrated networks as electroactive polymers for actuators: A molecular dynamics study, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2009.04.070
Janno Torop, Friedrich Kaasik, Takushi Sugino, Alvo Aabloo, Kinji Asaka (2010) Electromechanical characteristics of actuators based on carbide-derived carbon, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.847469
Deivid Pugal, Kwangmok Jung, Alvo Aabloo, Kwang J Kim (2010) Ionic polymer-metal composite mechanoelectrical transduction: Review and perspectives, Polymer International. http://doi.org/10.1002/pi.2759
Endel Soolo, Daniel Brandell, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Alvo Aabloo (2010) Force field generation and molecular dynamics simulations of Li+-Nafion, Electrochimica Acta. http://doi.org/10.1016/j.electacta.2009.03.039
Pugal, David (2010) Ionic polymer-metal composite mechanoelectrical transduction: review and perspectives (p n/a) (vol 59, pg 279, 2010), Polymer International. http://doi.org/10.1002/pi.2828
Vahur Zadin, Heiki Kasemägi, Alvo Aabloo, Daniel Brandell (2010) Modelling electrode material utilization in the trench model 3D-microbattery by finite element analysis, Journal of Power Sources. http://doi.org/10.1016/j.jpowsour.2010.02.056
Torop, Janno (2010) Nanoporous Carbide-Derived Carbon Material-Based Linear Actuators, Materials. http://doi.org/10.3390/ma3010009
D. Pugal, K. J. Kim, A. Aabloo (2010) Modeling the transduction of IPMC in 3D configurations, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.847958
Viljar Palmre, Daniel Brandell, Uno Mäeorg, Janno Torop, Olga Volobujeva, Andres Punning, Urmas Johanson, Alvo Aabloo (2010) Ionic polymer metal composites with nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.847518
Viljar Palmre, Daniel Brandell, Uno Mäeorg, Janno Torop, Olga Volobujeva, Andres Punning, Urmas Johanson, Maarja Kruusmaa, Alvo Aabloo (2009) Nanoporous carbon-based electrodes for high strain ionomeric bending actuators, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/18/9/095028
Punning, A. (2009) A Distributed Model of Ionomeric Polymer Metal Composite, Journal of Intelligent Material Systems and Structures. http://doi.org/10.1177/1045389x09337170
D. Pugal, A. Aabloo, K. J. Kim (2009) Dynamic surface resistance model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.815824
Indrek Must, Mart Anton, Maarja Kruusmaa, Alvo Aabloo (2009) Linear modeling of elongated bending EAP actuator at large deformations, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.815776
Pugal, D (2009) MODELING IPMC MATERIAL WITH DYNAMIC SURFACE CHARACTERISTICS, Smasis2009, Vol 2.
Karl Kruusamäe, Andres Punning, Maarja Kruusmaa, Alvo Aabloo (2009) Dynamical variation of the impedances of IPMC, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.815642
Janno Torop, Mati Arulepp, Jaan Leis, Andres Punning, Urmas Johanson, Alvo Aabloo (2009) Low voltage linear actuators based on carbide-derived carbon powder, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.815643
Daniel Brandell, Heiki Kasemägi, Johann Citérin, Frédéric Vidal, Claude Chevrot, Alvo Aabloo (2008) Molecular dynamics studies of interpenetrating polymer networks for actuator devices, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.776645
Urmas Johanson, Uno Mäeorg, Väino Sammelselg, Daniel Brandell, Andres Punning, Maarja Kruusmaa, Alvo Aabloo (2008) Electrode reactions in Cu-Pt coated ionic polymer actuators, Sensors and Actuators, B: Chemical. http://doi.org/10.1016/j.snb.2007.11.044
Johanson, U. and Mäeorg, U. and Brandell, D. and Punning, A. and Torop, J. and Kruusmaa, M. and Aabloo, A. (2008) Electrode reactions in Cu-Pt coated Nafion® actuators, CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Artificial Muscle Actuators using Electroactive Polymers.
Andres Hunt, Andres Punning, Mart Anton, Alvo Aabloo, Maarja Kruusmaa (2008) A multilink manipulator with IPMC joints, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.775952
Urmas Johanson, Andres Punning, Maarja Kruusmaa, Alvo Aabloo (2008) Self healing properties of Cu-Pt coated ionic polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.775770
Mart Anton, Alvo Aabloo, Andres Punning, Maarja Kruusmaa (2008) A mechanical model of a non-uniform ionomeric polymer metal composite actuator, Smart Materials and Structures. http://doi.org/10.1088/0964-1726/17/2/025004
D. Pugal, H. Kasemägi, M. Kruusmaa, A. Aabloo (2008) An advanced finite element model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.776610
Endel Soolo, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Daniel Brandell, Alvo Aabloo (2008) A new force field for molecular dynamics studies of Li+ and Na+-nafion, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.775963
Maarja Kruusmaa, Andres Hunt, Andres Punning, Mart Anton, Alvo Aabloo (2008) A linked manipulator with Ion-Polymer Metal Composite (IPMC) joints for soft- and micromanipulation, Proceedings - IEEE International Conference on Robotics and Automation. http://doi.org/10.1109/ROBOT.2008.4543760
A. Punning, U. Johanson, M. Anton, M. Kruusmaa, A. Aabloo (2008) A distributed model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.775631
Deivid Pugal, Kwang J. Kim, Andres Punning, Heiki Kasemägi, Maarja Kruusmaa, Alvo Aabloo (2008) A self-oscillating ionic polymer-metal composite bending actuator, Journal of Applied Physics. http://doi.org/10.1063/1.2903478
A. Liivat, D. Brandell, A. Aabloo, J.O. Thomas (2007) A molecular dynamics study of short-chain ordering in crystalline LiPF6·PEO6, Polymer. http://doi.org/10.1016/j.polymer.2007.08.051
Liivat, A (2007) A molecular dynamics study of short-chain ordering in crystalline LiPF6 center dot PEO6, Polymer. http://doi.org/10.1016/j.polymer.2007.08.05
D. Pugal, H. Kasemägi, K. J. Kim, M. Kruusmaa, A. Aabloo (2007) Finite element simulations of the bending of the IPMC sheet, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.715966
Andres Punning, Maarja Kruusmaa, Alvo Aabloo (2007) A self-sensing ion conducting polymer metal composite (IPMC) actuator, Sensors and Actuators, A: Physical. http://doi.org/10.1016/j.sna.2006.12.008
A. Punning, M. Kruusmaa, A. Aabloo (2007) Surface resistance experiments with IPMC sensors and actuators, Sensors and Actuators, A: Physical. http://doi.org/10.1016/j.sna.2006.03.010
Mart Anton, Maarja Kruusmaa, Alvo Aabloo, Andres Punning (2006) Validating usability of ionomeric polymer-metal composite actuators for real world applications, IEEE International Conference on Intelligent Robots and Systems. http://doi.org/10.1109/IROS.2006.282174
Endel Soolo, Jaanus Karo, Heiki Kasemägi, Maarja Kruusmaa, Alvo Aabloo (2006) Application of the Monte Carlo method for creation of initial models of EAP molecules for molecular dynamics simulation, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.658664
Listak, M (2005) Design of a semiautonomous biomimetic underwater vehicle for environmental monitoring., 2005 IEEE International Symposium on Computational Intelligence in Robotics and Automation, Proceedings. http://doi.org/10.1109/CIRA.2005.1554247
J KARO, A AABLOO, J THOMAS (2005) A molecular dynamics study of the effect of side-chains on mobility in a polymer host, Solid State Ionics. http://doi.org/10.1016/j.ssi.2005.10.003
D. Brandell, A. Liivat, H. Kasemägi, A. Aabloo, J. O. Thomas (2005) Molecular dynamics simulation of the LiPF6·PEO 6 structure, Journal of Materials Chemistry. http://doi.org/10.1039/b417232a
Brandell, D (2005) Conduction mechanisms in crystalline LiPF6 center dot PEO6 doped with SiF62- and SF6, Chemistry of Materials. http://doi.org/10.1021/cm0505401
Anti Liivat, Alvo Aabloo, John O. Thomas (2005) Development of a force field for Li 2SiF 6, Journal of Computational Chemistry. http://doi.org/10.1002/jcc.20209
D. Brandell, A. Liivat, A. Aabloo, J. O. Thomas (2005) Molecular dynamics simulation of the crystalline short-chain polymer system LiPF6·PEO6 (Mw ∼ 1000), Journal of Materials Chemistry. http://doi.org/10.1039/b505091j
Listak, M. (2005) Design of a semiautonomous biomimetic underwater vehicle for environmental monitoring, Proceedings. 2005 IEEE International Symposium on Computational Intelligence in Robotics and Automation (IEEE Cat. No. 05EX1153).
Brandell, D (2005) Molecular dynamics simulation of the LiPF6 center dot PEO6 structure, Journal of Materials Chemistry. http://doi.org/10.1039/b417323a
Heero, K. (2005) Learning innovative routes for mobile robots in dynamic partially unknown environments, International Journal of Advanced Robotic Systems.
A. Punning, M. Anton, M. Kruusmaa, A. Aabloo (2005) An engineering approach to reduced power consumption of IPMC (Ion-Polymer Metal Composite) actuators, 2005 International Conference on Advanced Robotics, ICAR '05, Proceedings. http://doi.org/10.1109/ICAR.2005.1507507
H. Kasemägi, A. Aabloo, M.K. Klintenberg, J.O. Thomas (2004) Molecular dynamics simulation of the effect of nanoparticle fillers on ion motion in a polymer host, Solid State Ionics. http://doi.org/10.1016/j.ssi.2002.12.002
Andi Hektor, Mattias K. Klintenberg, Alvo Aabloo, John O. Thomas (2003) Molecular dynamics simulation of the effect of a side chain on the dynamics of the amorphous LiPF 6-PEO system, Journal of Materials Chemistry. http://doi.org/10.1039/b206281j
Heiki Kasemägi, Mattias Klintenberg, Alvo Aabloo, John O. Thomas (2003) Molecular dynamics simulation of temperature and concentration dependence of the 'filler' effect for the LiCl/PEO/Al2O3-nanoparticle system, Electrochimica Acta. http://doi.org/10.1016/S0013-4686(03)00214-7
Heiki Kasemägi, Mattias Klintenberg, Alvo Aabloo, John O. Thomas (2002) Molecular dynamics simulation of the LiBF4-PEO system containing Al2O3 nanoparticles, Solid State Ionics. http://doi.org/10.1016/S0167-2738(02)00013-9
Brandell, D. and Klintenberg, M. and Aabloo, A. and Thomas, J.O. (2002) Optical absorption spectra from rare-earth ions in polymers: The effect of the polymer host, Macromolecular Symposia. http://doi.org/10.1002/1521-3900(200208)186:1<51::AID-MASY51>3.0.CO;2-Y
D. Brandell, M. Klintenberg, A. Aabloo, J. O. Thomas (2002) The effect of polymer host on optical absorption spectra for Er(CF 3SO 3) 3 in poly(ethylene oxide), Journal of Materials Chemistry. http://doi.org/10.1039/b104805h
Heiki Kasemägi, Mattias Klintenberg, Alvo Aabloo, John O. Thomas (2001) Molecular dynamics simulation of the effect of adding an Al2O3 nanoparticle to PEO-LiCl/LiBr/LiI systems, Journal of Materials Chemistry. http://doi.org/10.1039/b107345c
A Aabloo (2001) Molecular dynamics simulation of lithium ion mobility in a PEO surface, Solid State Ionics. http://doi.org/10.1016/S0167-2738(01)00836-0
Brandell, D. and Klintenberg, M. and Aabloo, A. and Thomas, J.O. (2000) Calculation of the optical absorption spectrum of ErCl 3 in poly(ethylene oxide) (PEO), International Journal of Quantum Chemistry.
A Aabloo, M Klintenberg, J.O Thomas (2000) Molecular dynamics simulation of a polymer-inorganic interface, Electrochimica Acta. http://doi.org/10.1016/S0013-4686(99)00354-0
Aabloo, A. and Thomas, J.O. (1998) Molecular dynamics simulation of Nd3+ ions in a crystalline PEO surface, Electrochimica Acta.
Aabloo, A. and Thomas, J. (1997) Molecular dynamics simulations of a poly(ethylene oxide) surface, Computational and Theoretical Polymer Science.
French, A. D. (1997) Modeling cellulose, Abstracts of Papers of the American Chemical Society.
Mikelsaar, R.-H. (1995) Parallel and antiparallel models of cellulose, Molecular Materials|Molecular Materials.
AABLOO, A (1994) PRELIMINARY POTENTIAL-ENERGY CALCULATIONS OF CELLULOSE I-ALPHA CRYSTAL-STRUCTURE, Macromolecular Theory and Simulations.
Aabloo, A., French, A.D. (1994) Preliminary potential energy calculations of cellulose iα crystal structure, Macromolecular Theory and Simulations. http://doi.org/10.1002/mats.1994.040030115
AABLOO, A (1994) STUDIES OF CRYSTALLINE NATIVE CELLULOSES USING POTENTIAL-ENERGY CALCULATIONS, Cellulose.
French, A. D. (1993) MINIATURE CRYSTAL MODELS OF CELLULOSE POLYMORPHS AND OTHER CARBOHYDRATES, International Journal of Biological Macromolecules. http://doi.org/10.1016/s0141-8130(05)80085-6
Mikelsaar, R.-H. and Aabloo, A. (1993) Molecular modelling of parallel and antiparallel structure of native cellulose, Proceedings of the International Conference on Cellulose and Cellulose Derivatives: Physico-Chemical Aspects and Industrial Applications.
Aabloo, A. and French, A.D. and Mikelsaar, R.-H. (1993) Packing energy calculations on the crystalline structure of cellulose I, Proceedings of the International Conference on Cellulose and Cellulose Derivatives: Physico-Chemical Aspects and Industrial Applications.

Conference Papers

Sunjai Nakshatharan, S., Punning, A., Johanson, U., Aabloo, A. (2019) Modelling and control of self-sensing ionic electroactive polymer actuator, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2514202
Zondaka, Z., Tamm, T., Aabloo, A., Kiefer, R. (2018) Solvent change in polymerization influence linear actuation of polypyrrole carbide-derived carbon films, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2300146
Sunjai Nakshatharan, S., Punning, A., Johanson, U., Aabloo, A. (2018) Fabrication of carbon polymer composite manipulated multi-degree motion platform, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2300752
Metshein, M., Annus, P., Land, R., Min, M., Aabloo, A. (2018) Availability and variations of cardiac activity in the case of measuring the bioimpedance of wrist, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. http://doi.org/10.1109/I2MTC.2018.8409684
Ahluwalia, A., De Maria, C., Lantada, A.D., Pietro, L.D., Ravizza, A., Mridha, M., Madete, J., Makobore, P.N., Aabloo, A., Kitsing, R., Leivobits, A. (2018) Towards open source medical devices current situation, inspiring advances and challenges, BIODEVICES 2018 - 11th International Conference on Biomedical Electronics and Devices, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018.
Nakshatharan, S.S., Johanson, U., Punning, A., Aabloo, A. (2017) Effect of porosity of the electrodes on ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2259763
Nakshatharan, S.S., Punning, A., Aabloo, A. (2017) Temperature and humidity dependence of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2259764
Krivoshei, A., Min, M., Annus, P., Kõiv, H., Aabloo, A., Uuetoa, T. (2017) Analysis of instantaneous cardiac EBI signal variability over the heart cycle(s): Non-linear time-scale approach, IFMBE Proceedings. http://doi.org/10.1007/978-981-10-5122-7_235
Nakshatharan, S.S., Punning, A., Johanson, U., Aabloo, A. (2017) Effect of electrical terminals made of copper to the ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2259932
Metshein, M., Annus, P., Land, R., Krivošei, A., Ojarand, J., Aabloo, A., Min, M. (2017) Variation of cardiac and respiratory waveform on human thorax in the case of inductive coupling, IFMBE Proceedings. http://doi.org/10.1007/978-981-10-5122-7_168
Zhu, Z., Asaka, K., Takagi, K., Aabloo, A., Horiuchi, T. (2016) A multi-physical model for charge and mass transport in a flexible ionic polymer sensor, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2218238
Zondaka, Z., Valner, R., Aabloo, A., Tamm, T., Kiefer, R. (2016) Embedded Carbide-derived Carbon (CDC) particles in polypyrrole (PPy) for linear actuator, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2218674
Nakshatharan, S., Punning, A., Aabloo, A. (2016) Neural network modeling and model predictive control of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2218728
Nakshatharan, S., Punning, A., Assi, S., Johanson, U., Aabloo, A. (2016) Fish-skeleton visualization of bending actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2219026
Nelson, J.V., Osborne, B., Imhof, A.B., Weiss, P., Taillebot, V., Aabloo, A., Doule, O., Gancet, J., Ransom, S., Saleny, V. (2016) Results of the Self Deployable Habitat for Extreme Environments (SHEE) project, Proceedings of the International Astronautical Congress, IAC.
Hamburg, E., Vunder, V., Johanson, U., Kaasik, F., Aabloo, A. (2016) Soft shape-adaptive gripping device made from artificial muscle, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2219051
Jaakson, P., Aabloo, A., Tamm, T. (2016) Encapsulation of ionic electroactive polymers: Reducing the interaction with environment, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2219053
Hamburg, E., Zondaka, Z., Punning, A., Johanson, U., Aabloo, A. (2016) Some electrochemical aspects of aqueous ionic polymer-composite actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2219031
Must, I., Kaasik, T., Baranova, I., Johanson, U., Punning, A., Aabloo, A. (2015) A power-autonomous self-rolling wheel using ionic and capacitive actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084252
Rasti, P., Kesküla, A., Haus, H., Schlaak, H.F., Anbarjafari, G., Aabloo, A., Kiefer, R. (2015) A passive autofocus system by using standard deviation of the image on a liquid lens, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084198
Imhof, B., Hoheneder, W., Ransom, S., Waclavicek, R., Weiss, P., Taillebot, V., Gobert, T., Osborne, B., Nelson, J., Gancet, J., Rodriguez, G., Salini, J., Aabloo, A., Kull, P., Ševčík, D., Gajdoš, P., Vajdák, M., Doule, O. (2015) Building the test-bed SHEE – a self-deployable habitat for extreme environments lessons learnt and exploitation opportunities for the scientific community, AIAA SPACE 2015 Conference and Exposition.
Sundla, S., Punning, A., Aabloo, A., Anbarjafari, G. (2015) Semi-automatic deflection measurement using digital image correlation, 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19. http://doi.org/10.1109/ICSTCC.2015.7321314
Põldsalu, I., Mändmaa, S.-E., Peikolainen, A.-L., Kesküla, A., Aabloo, A. (2015) Fabrication of ion-conducting carbon-polymer composite electrodes by spin-coating, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084180
Punning, A., Must, I., Põldsalu, I., Vunder, V., Kaasik, F., Temmer, R., Aabloo, A. (2015) Long-term degradation of the ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084201
Punning, A., Põldsalu, I., Kaasik, F., Vunder, V., Aabloo, A. (2015) Micro-mechanics of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084202
Punning, A., Must, I., Johanson, U., Aabloo, A. (2015) Thermal behavior of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084204
Kiefer, R., Martinez, J.G., Otero, T.F., Kesküla, A., Kaasik, F., Harjo, M., Valner, R., Vaddepally, V., Peikolainen, A.-L., Aabloo, A. (2015) Solvent and electrolyte effects in PPyDBS free standing films, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084195
Vunder, V., Punning, A., Aabloo, A. (2015) Long-term behavior of ionic electroactive polymer actuators in variable humidity conditions, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2084155
Doule, O., Imhof, B., Hoheneder, W., Ransom, S., Waclavicek, R., Kull, P., Aabloo, A., Weiss, P., Taillebot, V., Gardette, B., Gobert, T., Gancet, J., Letier, P., Rodriguez, G., Salini, J., Nelson, J., Welch, C., Gajdoš, P., Ševčík, D. (2014) Self-deployable habitat for extreme environments-universal platform for analog research, AIAA SPACE 2014 Conference and Exposition.
Kiefer, R., Kiveste, H., Punning, A., Kesküla, A., Lulla, T., Aabloo, A. (2014) Autofocus fluid lens device construction and implementation of modified ionic polymer metal composite (IPMC) membrane actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2044656
Vunder, V., Itik, M., Punning, A., Aabloo, A. (2014) Force control of ionic polymer-metal composite actuators with carbonbased electrodes, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2045001
Kiefer, R., Aydemir, N., Torop, J., Kilmartin, P.A., Tamm, T., Kaasik, F., Kesküla, A., Travas-Sejdic, J., Aabloo, A. (2014) Carbide-derived Carbon (CDC) linear actuator properties in combination with conducting polymers, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2044653
Rasti, P., Lusi, I., Sahakyan, A., Traumann, A., Bolotnikova, A., Daneshmand, M., Kiefer, R., Aabloo, A., Anbarjafar, G., Demirel, H., Ozcinar, C. (2014) Modified Back Projection Kernel Based Image Super Resolution, Proceedings - 2nd International Conference on Artificial Intelligence, Modelling, and Simulation, AIMS 2014. http://doi.org/10.1109/AIMS.2014.21
Aydemir, N., Tamm, T., Travas-Sejdic, J., Kilmartin, P.A., Aabloo, A., Kiefer, R. (2014) Electrochemomechanical deformation (ECMD) of PPyDBS in free standing film formation and trilayer designs, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2044702
Kaasik, F., Must, I., Lust, E., Jürgens, M., Presser, V., Punning, A., Temmer, R., Kiefer, R., Aabloo, A. (2014) In situ measurements with CPC micro-actuators using SEM, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2045136
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. (2014) Pulse-width-modulated charging of ionic and capacitive actuators, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. http://doi.org/10.1109/AIM.2014.6878286
Must, I., Põldsalu, I., Kaasik, F., Johanson, U., Punning, A., Aabloo, A. (2013) The performance of the ionic liquid-containing electroactive polymer actuators under ambient air conditions, ICCM International Conferences on Composite Materials.
Vunder, V., Punning, A., Aabloo, A. (2013) Viscoelastic model of IPMC actuators, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2009623
Must, I., Johanson, U., Kaasik, F., Poldsalu, I., Punning, A., Aabloo, A. (2013) An ionic liquid-based actuator as a humidity sensor, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013. http://doi.org/10.1109/AIM.2013.6584307
Kruusamäe, K., Kaasik, F., Punning, A., Aabloo, A. (2013) Self-sensing ionic electromechanically active actuator with patterned carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2012021
Travas-Sejdic, J., Tamm, T., Kilmartin, P.A., Temmer, R., Aabloo, A., Kiefer, R. (2013) PEDOT/TBACF₃SO₃ bending actuators based on a PEDOT-PEDOT sandwich complex, Proceedings of SPIE - The International Society for Optical Engineering. http://doi.org/10.1117/12.2009007
Vunder, V., Punning, A., Aabloo, A. (2012) Back-relaxation of carbon-based ionic electroactive polymer actuators, ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012. http://doi.org/10.1115/SMASIS2012-8127

Other

Vunder, V., Punning, A., Aabloo, A. (2016) Electromechanical distributed modeling of ionic polymer metal composites, RSC Smart Materials. http://doi.org/10.1039/9781782622581-00228
Johanson, U., Punning, A., Aabloo, A. (2016) Ionic polymer metal composites with electrochemically active electrodes, RSC Smart Materials. http://doi.org/10.1039/9781782622581-00215
Kiefer, R., Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A. (2014) Chitosan combined with conducting polymers for novel functionality: Antioxidant and antibacterial activity, Key Engineering Materials. http://doi.org/10.4028/www.scientific.net/KEM.605.428
Must, I. (2012) Carbon-Polymer-Ionic Liquid Composite as a Motion Sensor, Electroactive Polymer Actuators and Devices. http://doi.org/10.1117/12.915268
Kaasik, F. (2012) Ionic EAP transducers with amorphous nanoporous carbon electrodes, Electroactive Polymer Actuators and Devices. http://doi.org/10.1117/12.915136
Pugal, D. (2012) Physics based electromechanical model of IPMC considering various underlying currents, Electroactive Polymer Actuators and Devices. http://doi.org/10.1117/12.915919
Torop, J (2010) Nanoporous Carbide-derived Carbon Material for Bending Actuators, Actuator 10, Conference Proceedings.
Johanson, U (2009) Electrode reactions in Cu-Pt coated Nafion (R) actuators, Artificial Muscle Actuators Using Electroactive Polymers.
Brandell, D (2006) Molecular Dynamics simulations of Li- and Na-Nafion membranes - art. no. 61680G, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD). http://doi.org/10.1117/12.658633
Punning, A (2006) Empirical model of a bending IPMC actuator - art. no. 61681V, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD). http://doi.org/10.1117/12.658735

@@ Line 22: / Line 22: @@
 {{UserProfileItem | Administrative Responsibilities |
-* Administrative leader of Intelligence Materials and Systems Lab
+* Leader of Intelligence Materials and Systems Lab
-* Academic advisor of [http://www.ut.ee/robotiklubi Students Robotics Club] in Tartu University}}
 {{UserProfileItem | Other Activities | [http://www.robootika.ee Robotics For Education]}}

Search