User:Hans priks
From Intelligent Materials and Systems Lab
Publications
Journal Articles
- Karl Jakob Levin, Lancy Peter Lopes, Hans Priks, Tarmo Tamm, David Uslar (2026) Denim Dream: Recycling Post-Consumer Jeans into Low-Density Water-Repellent Cellulose Foams, Circular Economy and Sustainability. http://doi.org/10.1007/s43615-026-00740-6
- Siim Koor, Hans Priks, Tarmo Tamm (2026) Cost-Effective 3D Printing of Geopolymer Concrete Enhanced by Na-CMC as a Viscosity Modifier, ACS Omega. https://doi.org/10.1021/acsomega.6c03385
- Kadri‐Ann Pankratov, Leonid Zinatullin, Hans Priks, Adele Metsniit, Urmas Johanson, Tarmo Tamm, Alvo Aabloo, Edoardo Sinibaldi, Indrek Must (2026) Receptogenesis in a Vascularized Robotic Embodiment, Advanced Science. https://doi.org/10.1002/advs.76999
- Hans Priks, Veronika Zadin, Iris Robyn Talgre, Ivar Zekker, Tarmo Tamm (2025) Linking physical properties of micellar hydrogels to engineered living material performance, Materials & Design. https://doi.org/10.1016/j.matdes.2025.114347
- Hans Priks, Ivar Zekker, Antonio Ivan Manuell Nava, Rohit Kumar, Sovik Das, Madis Jaagura, Faysal-al Mamun, Gourav Dhar Bhowmick, Tarmo Tamm, Taavo Tenno (2024) Enhanced anammox-mediated nitrogen removal in bioelectrochemical systems at prolonged negative electrode potentials., Environmental science and pollution research international. http://doi.org/10.1007/s11356-024-35405-0
- Ingrid Rebane, Hans Priks, Karl Jakob Levin, İsmail Sarigül, Uno Mäeorg, Urmas Johanson, Peeter Piirimägi, Tanel Tenson, Tarmo Tamm (2023) Microbial growth and adhesion of Escherichia coli in elastomeric silicone foams with commonly used additives., Scientific reports. http://doi.org/10.1038/s41598-023-35239-9
- Butelmann, T., Priks, H., Parent, Z., Johnston, T.G., Tamm, T., Nelson, A., Lahtvee, P.-J., Kumar, R. (2021) Metabolism Control in 3D-Printed Living Materials Improves Fermentation, ACS Applied Bio Materials. http://doi.org/10.1021/acsabm.1c00754
- Evard, H., Priks, H., Saar, I., Aavola, H., Tamm, T., Leito, I. (2021) A new direction in microfluidics: Printed porous materials, Micromachines. http://doi.org/10.3390/mi12060671
- Trevor G. Johnston, Jacob P. Fillman, Hans Priks, Tobias Butelmann, Tarmo Tamm, Rahul Kumar, Petri-jaan Lahtvee, Alshakim Nelson (2020) Cell-Laden Hydrogels for Multikingdom 3D Printing., Macromolecular bioscience. http://doi.org/10.1002/mabi.202000121
- Hans Priks (2020) Scanning electron microscopy (SEM) protocol for imaging living materials, protocols.io. https://dx.doi.org/10.17504/protocols.io.bekcjcsw
- Hans Priks, Tobias Butelmann, Aleksandr Illarionov, Trevor G. Johnston, Christopher Fellin, Tarmo Tamm, Alshakim Nelson, Rahul Kumar, Petri-Jaan Lahtvee (2020) Physical Confinement Impacts Cellular Phenotypes within Living Materials, ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.0c00335
- Ivar Zekker, G. D. Bhowmick, Hans Priks, Dibyojyoty Nath, Ergo Rikmann, Madis Jaagura, Taavo Tenno, Kaido Tämm, Makarand M. Ghangrekar (2020) ANAMMOX-denitrification biomass in microbial fuel cell to enhance the electricity generation and nitrogen removal efficiency, Biodegradation. http://doi.org/10.1007/s10532-020-09907-w
- Ivar Zekker, Markus Raudkivi, Oleg Artemchuk, Ergo Rikmann, Hans Priks, Madis Jaagura, Taavo Tenno (2020) Mainstream-sidestream wastewater switching promotes anammox nitrogen removal rate in organic-rich, low-temperature streams, Environmental Technology. https://doi.org/10.1080/09593330.2020.1721566
- Fred Elhi, Hans Priks, Pille Rinne, Niilo Kaldalu, Eva Žusinaite, Urmas Johanson, Alvo Aabloo, Tarmo Tamm, Kaija Põhako-Esko (2020) Electromechanically active polymer actuators based on biofriendly choline ionic liquids, Smart Materials and Structures. https://doi.org/10.1088/1361-665x/ab7f24
Other
- Siimkoor, Tarmo Tamm, Hans Priks (2026) Cost-effective 3D Printing of Geopolymer Concrete Enhanced by Na‑CMC Rheology Control, Zenodo (CERN European Organization for Nuclear Research). http://doi.org/10.5281/zenodo.18623879
- Ingrid Rebane, Hans Priks, Karl-jakob Levin, İsmail Sarigül, Uno Mäeorg, Urmas Johanson, Peeter Piirimägi, Tanel Tenson, Tarmo Tamm (2023) Elastomeric silicone foam - an antibacterial environment or a new habitat for bacteria?. http://doi.org/10.21203/rs.3.rs-2530103/v1
- Tobias Butelmann, Hans Priks, Zoel Parent, Trevor G. Johnston, Tarmo Tamm, Alshakim Nelson, Petri-jaan Lahtvee, Rahul Kumar (2021) Metabolism Control in 3D Printed Living Materials. http://doi.org/10.1101/2021.01.15.426505
- Priks, H., Butelmann, T., Illarionov, A., Johnston, T.G., Fellin, C., Tamm, T., Nelson, A., Kumar, R., Lahtvee, P.-J. (2020) Physical confinement impacts cellular phenotype within living materials, Biorxiv. http://doi.org/10.1101/2020.03.25.004887
- Hans Priks, Tobias Butelmann (2020) Scanning electron microscopy (SEM) protocol for imaging living materials v1. https://doi.org/10.17504/protocols.io.bekcjcsw
- Ivar Zekker, G. D. Bhowmick, Ergo Rikmann, Anni Mandel, Taavo Tenno, Toomas Tenno, Hans Priks, Makarand M. Ghangrekar, A. Mitra (2018) Deammonification nitrogen removal, ORP aided operation benefits on MFC technology.