PI Publications By Year

Publications By Year

2019

Davide Grazioli, Vahur Zadin, Daniel Brandell, Angelo Simone Electrochemical-mechanical modeling of solid polymer electrolytes: Stress development and non-uniform electric current density in trench geometry microbatteries, Electrochimica Acta, 2019.
Davide Grazioli, Osvalds Verners, Vahur Zadin, Daniel Brandell, Angelo Simone Electrochemical-mechanical modeling of solid polymer electrolytes: Impact of mechanical stresses on Li-ion battery performance, Electrochimica Acta, 2019.
Harjo, M., Torop, J., Järvekülg, M., Tamm, T., Kiefer, R. Electrochemomechanical behavior of polypyrrole-coated nanofiber scaffolds in cell culturemedium, Polymers, 2019.
Khuyen, N.Q., Zondaka, Z., Harjo, M., Torop, J., Tamm, T., Kiefer, R. Comparative analysis of fluorinated anions for polypyrrole linear actuator electrolytes, Polymers, 2019.
Torop, J., Summer, F., Zadin, V., Koiranen, T., Jänes, A., Lust, E., Aabloo, A. Low concentrated carbonaceous suspensions assisted with carboxymethyl cellulose as electrode for electrochemical flow capacitor, European Physical Journal E, 2019.
Madis Harjo, Tarmo Tamm, Gholamreza Anbarjafari, Rudolf Kiefer Hardware and Software Development for Isotonic Strain and Isometric Stress Measurements of Linear Ionic Actuators, Polymers, 2019.
Madis Harjo, Janno Torop, Martin Järvekülg, Tarmo Tamm, Rudolf Kiefer Electrochemomechanical Behavior of Polypyrrole-Coated Nanofiber Scaffolds in Cell Culture Medium, Polymers, 2019.

2018

V Zadin, M Veske, S Vigonski, V Jansson, J Muszinsky, S Parviainen, A Aabloo, F Djurabekova Simulations of surface stress effects in nanoscale single crystals, Modelling and Simulation in Materials Science and Engineering, 2018.
Simon Vigonski, Ville Jansson, Sergei Vlassov, Boris Polyakov, Ekaterina Baibuz, Sven Oras, Alvo Aabloo, Flyura Djurabekova, Vahur Zadin Au nanowire junction breakup through surface atom diffusion, Nanotechnology, 2018.
Sunjai Nakshatharan, S., Punning, A., Johanson, U., Aabloo, A. Effect of porosity and tortuosity of electrodes on carbon polymer soft actuators, Journal of Applied Physics, 2018.
Modelling and Control of Ionic Electroactive Polymer Actuators under Varying Humidity Conditions, Actuators, 2018.
Nevstrueva, D., Murashko, K., Vunder, V., Aabloo, A., Pihlajamäki, A., Mänttäri, M., Pyrhönen, J., Koiranen, T., Torop, J. Natural cellulose ionogels for soft artificial muscles, Colloids and Surfaces B: Biointerfaces, 2018.
Vigonski, S., Jansson, V., Vlassov, S., Polyakov, B., Baibuz, E., Oras, S., Aabloo, A., Djurabekova, F., Zadin, V. Au nanowire junction breakup through surface atom diffusion, Nanotechnology, 2018.
Metspalu, T., Jansson, V., Zadin, V., Avchaciov, K., Nordlund, K., Aabloo, A., Djurabekova, F. Cu self-sputtering MD simulations for 0.1–5 keV ions at elevated temperatures, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 2018.
A Comprehensive High-Level Model for CMOS-MEMS Resonators, IEEE Sensors Journal, 2018.
Ahluwalia, A., De Maria, C., Díaz Lantada, A., Madete, J., Makobore, P.N., Ravizza, A., Di Pietro, L., Mridha, M., Munoz-Guijosa, J.M., Tanarro, E.C., Torop, J. Biomedical engineering project based learning: Euro-African design school focused on medical devices, International Journal of Engineering Education, 2018.
Nevstrueva, D., Murashko, K., Vunder, V., Aabloo, A., Pihlajamäki, A., Mänttäri, M., Pyrhönen, J., Koiranen, T., Torop, J. Natural cellulose ionogels for soft artificial muscles, Colloids and Surfaces B: Biointerfaces, 2018.
De Maria, C., Di Pietro, L., Díaz Lantada, A., Madete, J., Makobore, P.N., Mridha, M., Ravizza, A., Torop, J., Ahluwalia, A. Safe innovation: On medical device legislation in Europe and Africa, Health Policy and Technology, 2018.
Põldsalu, I., Johanson, U., Tamm, T., Punning, A., Greco, F., Peikolainen, A.-L., Kiefer, R., Aabloo, A. Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes, Synthetic Metals, 2018.
Kisand, K., Sarapuu, A., Peikolainen, A.-L., Seemen, H., Kook, M., Käärik, M., Leis, J., Sammelselg, V., Tammeveski, K. Oxygen Reduction on Fe- and Co-Containing Nitrogen-Doped Nanocarbons, ChemElectroChem, 2018.
Põldsalu, I., Rohtlaid, K., Nguyen, T.M.G., Plesse, C., Vidal, F., Khorram, M.S., Peikolainen, A.-L., Tamm, T., Kiefer, R. Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks, Sensors and Actuators, B: Chemical, 2018.
Valner, R., Kruusamäe, K., Pryor, M. TeMoto: Intuitive multi-range telerobotic system with natural gestural and verbal instruction interface, Robotics, 2018.
Veiko Vunder, Robert Valner, Conor McMahon, Karl Kruusamae, Mitch Pryor Improved Situational Awareness in ROS Using Panospheric Vision and Virtual Reality, 2018 11th International Conference on Human System Interaction (HSI), 2018.
Mihkel Ilisson, Kristjan Tomson, Tarmo Tamm, Uno Mäeorg Carbon–carbon double bond isomerization in heterocyclic hydrazine derivatives, Chemistry of Heterocyclic Compounds, 2018.
Khadka, R., Zondaka, Z., Travas-Sejdic, J., Tamm, T., Kiefer, R. Polypyrrole with polyethylene oxide: Linear actuation in organic and aqueous electrolytes, Proceedings of SPIE - The International Society for Optical Engineering, 2018.
Rudolf Kiefer, Zane Zondaka, Alvo Aabloo, Tarmo Tamm, Yoseph Bar-Cohen Solvent change in polymerization influence linear actuation of polypyrrole carbide-derived carbon films , Electroactive Polymer Actuators and Devices (EAPAD) XX, 2018.
Leemets, K., Mäeorg, U., Aabloo, A., Tamm, T. Effect of contact material and ambient humidity on the performance of MWCNT/PDMS multimodal deformation sensors, Sensors and Actuators, A: Physical, 2018.
Khadka, R., Zondaka, Z., Kesküla, A., Khorram, M.S., Khanh, T.T., Tamm, T., Travas-Sejdic, J., Kiefer, R. Influence of solvent on linear polypyrrole–polyethylene oxide actuators, Journal of Applied Polymer Science, 2018.
Jaanus Burk, Lauri Sikk, Peeter Burk, Bella Manshian, Stefaan J Soenen, Janeck James Scott-Fordsmand, Tarmo Tamm, Kaido Tämm Fe-doped ZnO nanoparticle toxicity: assessment by a new generation of nanodescriptors, Nanoscale, 2018.
Zane Zondaka, Madis Harjo, Md. Asaduzzaman Khan, Tran Thien Khanh, Tarmo Tamm, Rudolf Kiefer Optimal phosphotungstinate concentration for polypyrrole linear actuation and energy storage, Multifunctional Materials, 2018.
Inga Põldsalu, Kätlin Rohtlaid, Tran Minh Giao Nguyen, Cedric Plesse, Frédéric Vidal, Mahdi Safaei Khorram, Anna-Liisa Peikolainen, Tarmo Tamm, Rudolf Kiefer Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks, Sensors and Actuators B: Chemical, 2018.
Khanh, T.T., Lee, R.-J., Kilmartin, P.A., Khan, M.A., Khorram, M.S., Tamm, T., Kiefer, R. Actuation increase in polypyrrole bilayer by photo-activated dopants, Synthetic Metals, 2018.
Zondaka, Z., Kivilo, A., Nakshatharan, S., Küppar, K.-A., Johanson, U., Tamm, T., Kiefer, R. Carbide-derived carbon and poly-3,4-ethylenedioxythiphene composite laminate: linear and bending actuation, Synthetic Metals, 2018.
Rudolf Kiefer, Roshan Khadka, Zane Zondaka, Jadranka Travas-Sejdic, Tarmo Tamm, Yoseph Bar-Cohen Polypyrrole polymerized in polyethylene oxide: linear actuation in organic and aqueous electrolytes, Electroactive Polymer Actuators and Devices (EAPAD) XX, 2018.
Alo Kivilo, Zane Zondaka, Sunjai Nakshatharan, Kadi-Anne Küppar, Tarmo Tamm, Rudolf Kiefer, Yoseph Bar-Cohen Poly-3,4-ethylenedixoythiophene on carbide-derived carbon trilayer: combined linear actuation characterization, Electroactive Polymer Actuators and Devices (EAPAD) XX, 2018.
Inga Põldsalu, Urmas Johanson, Tarmo Tamm, Andres Punning, Francesco Greco, Anna-Liisa Peikolainen, Rudolf Kiefer, Alvo Aabloo Mechanical and electro-mechanical properties of EAP actuators with inkjet printed electrodes, Synthetic Metals, 2018.
Zane Zondaka, Madis Harjo, Mahdi Safaei Khorram, Pejman Rasti, Tarmo Tamm, Rudolf Kiefer Polypyrrole/carbide-derived carbon composite in organic electrolyte: Characterization as a linear actuator, Reactive and Functional Polymers, 2018.

2017

Kaasik, F., Must, I., Baranova, I., Põldsalu, I., Lust, E., Johanson, U., Punning, A., Aabloo, A. Scalable fabrication of ionic and capacitive laminate actuators for soft robotics, Sensors and Actuators, B: Chemical, 2017.
Netzer NL, Must I, Qiao Y, Zhang SL, Wang Z, Zhang Z Biomimetic supercontainers for size-selective electrochemical sensing of molecular ions., , 2017.
Priimägi, P., Kasemägi, H., Aabloo, A., Brandell, D., Zadin, V. Thermal Simulations of Polymer Electrolyte 3D Li-Microbatteries, Electrochimica Acta, 2017.
Nakshatharan, S.S., Johanson, U., Punning, A., Aabloo, A. Effect of porosity of the electrodes on ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2017.
Béland, L.K., Tamm, A., Mu, S., Samolyuk, G.D., Osetsky, Y.N., Aabloo, A., Klintenberg, M., Caro, A., Stoller, R.E. Accurate classical short-range forces for the study of collision cascades in Fe–Ni–Cr, Computer Physics Communications, 2017.
Metshein, M., Annus, P., Land, R., Krivošei, A., Ojarand, J., Aabloo, A., Min, M. Variation of cardiac and respiratory waveform on human thorax in the case of inductive coupling, IFMBE Proceedings, 2017.
Nakshatharan, S.S., Punning, A., Aabloo, A. Temperature and humidity dependence of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2017.
Kaasik, F., Must, I., Baranova, I., Põldsalu, I., Lust, E., Johanson, U., Punning, A., Aabloo, A. Scalable fabrication of ionic and capacitive laminate actuators for soft robotics, Sensors and Actuators, B: Chemical, 2017.
Priimägi, P., Kasemägi, H., Aabloo, A., Brandell, D., Zadin, V. Thermal Simulations of Polymer Electrolyte 3D Li-Microbatteries, Electrochimica Acta, 2017.
Nakshatharan, S.S., Punning, A., Aabloo, A. A neural network modeling and sliding mode control of self-sensing ionic polymer–metal composite actuator, Journal of Intelligent Material Systems and Structures, 2017.
Metsanurk, E., Tamm, A., Aabloo, A., Klintenberg, M., Caro, A. Vacancies at the Cu-Nb semicoherent interface, Modelling and Simulation in Materials Science and Engineering, 2017.
Nakshatharan, S.S., Punning, A., Johanson, U., Aabloo, A. Effect of electrical terminals made of copper to the ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2017.
Krivoshei, A., Min, M., Annus, P., Kõiv, H., Aabloo, A., Uuetoa, T. Analysis of instantaneous cardiac EBI signal variability over the heart cycle(s): Non-linear time-scale approach, IFMBE Proceedings, 2017.
Characterization of CMOS-MEMS Resonant Pressure Sensors, IEEE Sensors Journal, 2017.
CMOS-MEMS resonant pressure sensors: Optimization and validation through comparative analysis, Microsystem Technologies, 2017.
Bauer, T., Voggenreiter, M., Xu, T., Wähler, T., Agel, F., Pohako-Esko, K., Schulz, P., Döpper, T., Görling, A., Polarz, S., Wasserscheid, P., Libuda, J. ZnO Nanoparticle Formation from the Molecular Precursor [MeZnOtBu]₄by Ozone Treatment in Ionic Liquids: in-situ Vibrational Spectroscopy in an Ultrahigh Vacuum Environment, Zeitschrift fur Anorganische und Allgemeine Chemie, 2017.
Kiefer, R., Kesküla, A., Martinez, J.G., Anbarjafari, G., Torop, J., Otero, T.F. Interpenetrated triple polymeric layer as electrochemomechanical actuator: Solvent influence and diffusion coefficient of counterions, Electrochimica Acta, 2017.
Natural cellulose ionogels for soft artificial muscles., Colloids and surfaces. B, Biointerfaces, 2017.
Põldsalu, I., Harjo, M., Tamm, T., Uibu, M., Peikolainen, A.-L., Kiefer, R. Inkjet‐printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte, Sensors and Actuators, B: Chemical, 2017.
Andrew Sharp, Karl Kruusamae, Ben Ebersole, Mitch Pryor Semiautonomous dual-arm mobile manipulator system with intuitive supervisory user interfaces, 2017 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO), 2017.
Mart Toots, Mart Ustav, Andres Männik, Karl Mumm, Kaido Tämm, Tarmo Tamm, Ene Ustav, Mart Ustav, Paul Francis Lambert Identification of several high-risk HPV inhibitors and drug targets with a novel high-throughput screening assay, PLOS Pathogens, 2017.
Bella B. Manshian, Suman Pokhrel, Uwe Himmelreich, Kaido Tämm, Lauri Sikk, Alberto Fernández, Robert Rallo, Tarmo Tamm, Lutz Mädler, Stefaan J. Soenen In Silico Design of Optimal Dissolution Kinetics of Fe-Doped ZnO Nanoparticles Results in Cancer-Specific Toxicity in a Preclinical Rodent Model, Advanced Healthcare Materials, 2017.
Inga Põldsalu, Madis Harjo, Tarmo Tamm, Mai Uibu, Anna-Liisa Peikolainen, Rudolf Kiefer Inkjet‐printed hybrid conducting polymer-activated carbon aerogel linear actuators driven in an organic electrolyte, Sensors and Actuators B: Chemical, 2017.
Martin Brehm, Alexander Kafka, Markus Bamler, Ralph Kühne, Gerrit Schüürmann, Lauri Sikk, Jaanus Burk, Peeter Burk, Tarmo Tamm, Kaido Tämm, Suman Pokhrel, Lutz Mädler, Anne Kahru, Villem Aruoja, Mariliis Sihtmäe, Janeck Scott-Fordsmand, Peter B. Sorensen, Laura Escorihuela, Carlos P. Roca, Alberto Fernández, Francesc Giralt, Robert Rallo An Integrated Data-Driven Strategy for Safe-by-Design Nanoparticles: The FP7 MODERN Project, Modelling the Toxicity of Nanoparticles, 2017.
Harjo, M., Kesküla, A., Leemets, K., Khorram, M.S., Saar, R., Järvekülg, M., Tamm, T., Kiefer, R. Polypyrrole coatings on gelatin fiber scaffolds: Material and electrochemical characterizations in organic and aqueous electrolyte, Synthetic Metals, 2017.
Zondaka, Z., Kesküla, A., Tamm, T., Kiefer, R. Polypyrrole linear actuation tuned by phosphotungstic acid, Sensors and Actuators, B: Chemical, 2017.
Khadka, R., Aydemir, N., Kesküla, A., Tamm, T., Travas-Sejdic, J., Kiefer, R. Enhancement of polypyrrole linear actuation with poly(ethylene oxide), Synthetic Metals, 2017.

2016

Zhang, D., Must, I., Netzer, N.L., Xu, X., Solomon, P., Zhang, S.-L., Zhang, Z. Direct assessment of solid-liquid interface noise in ion sensing using a differential method, Applied Physics Letters, 2016.
Veske, M., Parviainen, S., Zadin, V., Aabloo, A., Djurabekova, F. Electrodynamics - Molecular dynamics simulations of the stability of Cu nanotips under high electric field, Journal of Physics D: Applied Physics, 2016.
Veske, M., Kyritsakis, A., Djurabekova, F., Aare, R., Eimre, K., Zadin, V. Atomistic modeling of metal surfaces under high electric fields: Direct coupling of electric fields to the atomistic simulations, 2016 29th International Vacuum Nanoelectronics Conference, IVNC 2016, 2016.
Priimägi, P., Brandell, D., Srivastav, S., Aabloo, A., Kasemägi, H., Zadin, V. Optimizing the design of 3D-pillar microbatteries using finite element modelling, Electrochimica Acta, 2016.
Mets, M., Antsov, M., Zadin, V., Dorogin, L.M., Aabloo, A., Polyakov, B., Lõhmus, R., Vlassov, S. Structural factor in bending testing of fivefold twinned nanowires revealed by finite element analysis, Physica Scripta, 2016.
Nakshatharan, S., Punning, A., Assi, S., Johanson, U., Aabloo, A. Fish-skeleton visualization of bending actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Zhu, Z., Asaka, K., Takagi, K., Aabloo, A., Horiuchi, T. A multi-physical model for charge and mass transport in a flexible ionic polymer sensor, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Vunder, V., Hamburg, E., Johanson, U., Punning, A., Aabloo, A. Effect of ambient humidity on ionic electroactive polymer actuators, Smart Materials and Structures, 2016.
Zondaka, Z., Valner, R., Tamm, T., Aabloo, A., Kiefer, R. Carbide-derived carbon in polypyrrole changing the elastic modulus with a huge impact on actuation, RSC Advances, 2016.
Aabloo, A., De Luca, V., Di Pasquale, G., Graziani, S., Gugliuzzo, C., Johanson, U., Marino, C., Pollicino, A., Puglisi, R. A new class of ionic electroactive polymers based on green synthesis, Sensors and Actuators, A: Physical, 2016.
Tamm, A., Samolyuk, G., Correa, A.A., Klintenberg, M., Aabloo, A., Caro, A. Electron-phonon interaction within classical molecular dynamics, Physical Review B, 2016.
Priimägi, P., Brandell, D., Srivastav, S., Aabloo, A., Kasemägi, H., Zadin, V. Optimizing the design of 3D-pillar microbatteries using finite element modelling, Electrochimica Acta, 2016.
Stoller, R.E., Tamm, A., Béland, L.K., Samolyuk, G.D., Stocks, G.M., Caro, A., Slipchenko, L.V., Osetsky, Y.N., Aabloo, A., Klintenberg, M., Wang, Y. Impact of Short-Range Forces on Defect Production from High-Energy Collisions, Journal of Chemical Theory and Computation, 2016.
Hamburg, E., Zondaka, Z., Punning, A., Johanson, U., Aabloo, A. Some electrochemical aspects of aqueous ionic polymer-composite actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Hamburg, E., Vunder, V., Johanson, U., Kaasik, F., Aabloo, A. Soft shape-adaptive gripping device made from artificial muscle, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Nelson, J.V., Osborne, B., Imhof, A.B., Weiss, P., Taillebot, V., Aabloo, A., Doule, O., Gancet, J., Ransom, S., Saleny, V. Results of the Self Deployable Habitat for Extreme Environments (SHEE) project, Proceedings of the International Astronautical Congress, IAC, 2016.
Veske, M., Parviainen, S., Zadin, V., Aabloo, A., Djurabekova, F. Electrodynamics - Molecular dynamics simulations of the stability of Cu nanotips under high electric field, Journal of Physics D: Applied Physics, 2016.
Johanson, U., Punning, A., Aabloo, A. Ionic polymer metal composites with electrochemically active electrodes, RSC Smart Materials, 2016.
Kiefer, R., Martinez, J.G., Kesküla, A., Anbarjafari, G., Aabloo, A., Otero, T.F. Polymeric actuators: Solvents tune reaction-driven cation to reaction-driven anion actuation, Sensors and Actuators, B: Chemical, 2016.
Vunder, V., Punning, A., Aabloo, A. Electromechanical distributed modeling of ionic polymer metal composites, RSC Smart Materials, 2016.
Mets, M., Antsov, M., Zadin, V., Dorogin, L.M., Aabloo, A., Polyakov, B., Lõhmus, R., Vlassov, S. Structural factor in bending testing of fivefold twinned nanowires revealed by finite element analysis, Physica Scripta, 2016.
Nakshatharan, S., Punning, A., Aabloo, A. Neural network modeling and model predictive control of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Zondaka, Z., Valner, R., Aabloo, A., Tamm, T., Kiefer, R. Embedded Carbide-derived Carbon (CDC) particles in polypyrrole (PPy) for linear actuator, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Daneshmand, M., Aabloo, A., Ozcinar, C., Anbarjafari, G. Real-time, automatic shape-changing robot adjustment and gender classification, Signal, Image and Video Processing, 2016.
Zhu, Z., Chang, L., Horiuchi, T., Takagi, K., Aabloo, A., Asaka, K. Multi-physical model of cation and water transport in ionic polymer-metal composite sensors, Journal of Applied Physics, 2016.
Jaakson, P., Aabloo, A., Tamm, T. Encapsulation of ionic electroactive polymers: Reducing the interaction with environment, Proceedings of SPIE - The International Society for Optical Engineering, 2016.
Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator, 2016 Ieee Sensors, 2016.
Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform, JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts, 2016.
Pohako-Esko, K., Wehner, T., Schulz, P.S., Heinemann, F.W., Müller-Buschbaum, K., Wasserscheid, P. Synthesis and Properties of Organic Hexahalocerate(III) Salts, European Journal of Inorganic Chemistry, 2016.
Karousos, D.S., Kouvelos, E., Sapalidis, A., Pohako-Esko, K., Bahlmann, M., Schulz, P.S., Wasserscheid, P., Siranidi, E., Vangeli, O., Falaras, P., Kanellopoulos, N., Romanos, G.E. Novel Inverse Supported Ionic Liquid Absorbents for Acidic Gas Removal from Flue Gas, Industrial and Engineering Chemistry Research, 2016.
Bauer, T., Mehl, S., Brummel, O., Pohako-Esko, K., Wasserscheid, P., Libuda, J. Ligand Effects at Ionic Liquid-Modified Interfaces: Coadsorption of [C₂C₁Im][OTf] and CO on Pd(111), Journal of Physical Chemistry C, 2016.
Mehl, S., Bauer, T., Brummel, O., Pohako-Esko, K., Schulz, P., Wasserscheid, P., Libuda, J. Ionic-Liquid-Modified Hybrid Materials Prepared by Physical Vapor Codeposition: Cobalt and Cobalt Oxide Nanoparticles in [C₁C₂Im][OTf] Monitored by in Situ IR Spectroscopy, Langmuir, 2016.
Pohako-Esko, K., Bahlmann, M., Schulz, P.S., Wasserscheid, P. Chitosan Containing Supported Ionic Liquid Phase Materials for CO₂ Absorption, Industrial and Engineering Chemistry Research, 2016.
Brummel, O., Faisal, F., Bauer, T., Pohako-Esko, K., Wasserscheid, P., Libuda, J. Ionic Liquid-Modified Electrocatalysts: The Interaction of [C₁C₂Im][OTf] with Pt(1 1 1) and its Influence on Methanol Oxidation Studied by Electrochemical IR Spectroscopy, Electrochimica Acta, 2016.
Kruusamäe, K., Thompson, J., Pryor, M. Spatially-Mapped Human-Robot interface for teleoperation of high-precision tasks, D and RS 2016 - Decommissioning and Remote Systems, 2016.
Zhu, Z., Horiuchi, T., Kruusamäe, K., Chang, L., Asaka, K. Influence of Ambient Humidity on the Voltage Response of Ionic Polymer-Metal Composite Sensor, Journal of Physical Chemistry B, 2016.
Zhu, Z., Horiuchi, T., Kruusamae, K., Chang, L., Asaka, K. The effect of ambient humidity on the electrical response of ion-migration-based polymer sensor with various cations, Smart Materials and Structures, 2016.
Karl Kruusamae, Mitch Pryor High-precision telerobot with human-centered variable perspective and scalable gestural interface, 2016 9th International Conference on Human System Interactions (HSI), 2016.
Kinji Asaka, Karl Kruusamäe, Kwang Kim, Viljar Palmre, Kam K. Leang IPMCs as EAPs: How to Start Experimenting with Them, Electromechanically Active Polymers, 2016.
Zondaka, Z., Valner, R., Tamm, T., Aabloo, A., Kiefer, R. Carbide-derived carbon in polypyrrole changing the elastic modulus with a huge impact on actuation, RSC Advances, 2016.
Kaur Leemets, Uno Mäeorg, Tarmo Tamm Development of soft and compliant multimodal deformation sensors, Sensors and Actuators A: Physical, 2016.
Tämm, K., Sikk, L., Burk, J., Rallo, R., Pokhrel, S., Mädler, L., Scott-Fordsmand, J.J., Burk, P., Tamm, T. Parametrization of nanoparticles: Development of full-particle nanodescriptors, Nanoscale, 2016.
Zane Zondaka, Robert Valner, Alvo Aabloo, Tarmo Tamm, Rudolf Kiefer, Yoseph Bar-Cohen, Frédéric Vidal Embedded Carbide-derived Carbon (CDC) particles in polypyrrole (PPy) for linear actuator, Electroactive Polymer Actuators and Devices (EAPAD) 2016, 2016.
Kivilo, A., Zondaka, Z., Kesküla, A., Rasti, P., Tamm, T., Kiefer, R. Electro-chemo-mechanical deformation properties of polypyrrole/dodecylbenzenesulfate linear actuators in aqueous and organic electrolyte, RSC Advances, 2016.
Jaakson, P., Aabloo, A., Tamm, T. Encapsulation of ionic electroactive polymers: Reducing the interaction with environment, Proceedings of SPIE - The International Society for Optical Engineering, 2016.

2015

Punning, A., Vunder, V., Must, I., Johanson, U., Anbarjafari, G., Aabloo, A. In situ scanning electron microscopy study of strains of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2015.
Punning, A., Must, I., Johanson, U., Aabloo, A. Thermal behavior of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Must, I., Kaasik, T., Baranova, I., Johanson, U., Punning, A., Aabloo, A. A power-autonomous self-rolling wheel using ionic and capacitive actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. Ionic and capacitive artificial muscle for biomimetic soft robotics, Advanced Engineering Materials, 2015.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Kaasik, F., Temmer, R., Aabloo, A. Long-term degradation of the ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Zadin, V., Krasheninnikov, A.V., Djurabekova, F., Nordlund, K. Simulations of electromechanical shape transformations of Au nanoparticles, Physica Status Solidi (B) Basic Research, 2015.
Vigonski, S., Veske, M., Aabloo, A., Djurabekova, F., Zadin, V. Verification of a multiscale surface stress model near voids in copper under the load induced by external high electric field, Applied Mathematics and Computation, 2015.
Eimre, K., Parviainen, S., Aabloo, A., Djurabekova, F., Zadin, V. Application of the general thermal field model to simulate the behaviour of nanoscale Cu field emitters, Journal of Applied Physics, 2015.
Zadin, V., Kasemägi, H., Valdna, V., Vigonski, S., Veske, M., Aabloo, A. Application of multiphysics and multiscale simulations to optimize industrial wood drying kilns, Applied Mathematics and Computation, 2015.
Vigonski, S., Djurabekova, F., Veske, M., Aabloo, A., Zadin, V. Molecular dynamics simulations of near-surface Fe precipitates in Cu under high electric fields, Modelling and Simulation in Materials Science and Engineering, 2015.
Punning, A., Must, I., Johanson, U., Aabloo, A. Thermal behavior of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Rasti, P., Kesküla, A., Haus, H., Schlaak, H.F., Anbarjafari, G., Aabloo, A., Kiefer, R. A passive autofocus system by using standard deviation of the image on a liquid lens, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Eimre, K., Parviainen, S., Aabloo, A., Djurabekova, F., Zadin, V. Application of the general thermal field model to simulate the behaviour of nanoscale Cu field emitters, Journal of Applied Physics, 2015.
Kiefer, R., Martinez, J.G., Otero, T.F., Kesküla, A., Kaasik, F., Harjo, M., Valner, R., Vaddepally, V., Peikolainen, A.-L., Aabloo, A. Solvent and electrolyte effects in PPyDBS free standing films, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Punning, A., Põldsalu, I., Kaasik, F., Vunder, V., Aabloo, A. Micro-mechanics of ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Zadin, V., Kasemägi, H., Valdna, V., Vigonski, S., Veske, M., Aabloo, A. Application of multiphysics and multiscale simulations to optimize industrial wood drying kilns, Applied Mathematics and Computation, 2015.
Põldsalu, I., Mändmaa, S.-E., Peikolainen, A.-L., Kesküla, A., Aabloo, A. Fabrication of ion-conducting carbon-polymer composite electrodes by spin-coating, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. Ionic and capacitive artificial muscle for biomimetic soft robotics, Advanced Engineering Materials, 2015.
Vigonski, S., Djurabekova, F., Veske, M., Aabloo, A., Zadin, V. Molecular dynamics simulations of near-surface Fe precipitates in Cu under high electric fields, Modelling and Simulation in Materials Science and Engineering, 2015.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Kaasik, F., Temmer, R., Aabloo, A. Long-term degradation of the ionic electroactive polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Vunder, V., Punning, A., Aabloo, A. Long-term behavior of ionic electroactive polymer actuators in variable humidity conditions, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Punning, A., Vunder, V., Must, I., Johanson, U., Anbarjafari, G., Aabloo, A. In situ scanning electron microscopy study of strains of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2015.
Imhof, B., Hoheneder, W., Ransom, S., Waclavicek, R., Weiss, P., Taillebot, V., Gobert, T., Osborne, B., Nelson, J., Gancet, J., Rodriguez, G., Salini, J., Aabloo, A., Kull, P., Ševčík, D., Gajdoš, P., Vajdák, M., Doule, O. Building the test-bed SHEE – a self-deployable habitat for extreme environments lessons learnt and exploitation opportunities for the scientific community, AIAA SPACE 2015 Conference and Exposition, 2015.
Aydemir, N., Kilmartin, P.A., Travas-Sejdic, J., Kesküla, A., Peikolainen, A.-L., Parcell, J., Harjo, M., Aabloo, A., Kiefer, R. Electrolyte and solvent effects in PPy/DBS linear actuators, Sensors and Actuators, B: Chemical, 2015.
Vigonski, S., Veske, M., Aabloo, A., Djurabekova, F., Zadin, V. Verification of a multiscale surface stress model near voids in copper under the load induced by external high electric field, Applied Mathematics and Computation, 2015.
Tamm, A., Aabloo, A., Klintenberg, M., Stocks, M., Caro, A. Atomic-scale properties of Ni-based FCC ternary, and quaternary alloys, Acta Materialia, 2015.
Sundla, S., Punning, A., Aabloo, A., Anbarjafari, G. Semi-automatic deflection measurement using digital image correlation, 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, 2015.
Plaado, M., Kaasik, F., Valner, R., Lust, E., Saar, R., Saal, K., Peikolainen, A.-L., Aabloo, A., Kiefer, R. Electrochemical actuation of multiwall carbon nanotube fiber with embedded carbide-derived carbon particles, Carbon, 2015.
Must, I., Kaasik, T., Baranova, I., Johanson, U., Punning, A., Aabloo, A. A power-autonomous self-rolling wheel using ionic and capacitive actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Optimization of parameters for CMOS MEMS resonant pressure sensors, 2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2015.
Koller, T.M., Rausch, M.H., Pohako-Esko, K., Wasserscheid, P., Fröba, A.P. Surface Tension of Tricyanomethanide- and Tetracyanoborate-Based Imidazolium Ionic Liquids by Using the Pendant Drop Method, Journal of Chemical and Engineering Data, 2015.
Kiefer, R., Martinez, J.G., Otero, T.F., Kesküla, A., Kaasik, F., Harjo, M., Valner, R., Vaddepally, V., Peikolainen, A.-L., Aabloo, A. Solvent and electrolyte effects in PPyDBS free standing films, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Põldsalu, I., Mändmaa, S.-E., Peikolainen, A.-L., Kesküla, A., Aabloo, A. Fabrication of ion-conducting carbon-polymer composite electrodes by spin-coating, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Plaado, M., Kaasik, F., Valner, R., Lust, E., Saar, R., Saal, K., Peikolainen, A.-L., Aabloo, A., Kiefer, R. Electrochemical actuation of multiwall carbon nanotube fiber with embedded carbide-derived carbon particles, Carbon, 2015.
Aydemir, N., Kilmartin, P.A., Travas-Sejdic, J., Kesküla, A., Peikolainen, A.-L., Parcell, J., Harjo, M., Aabloo, A., Kiefer, R. Electrolyte and solvent effects in PPy/DBS linear actuators, Sensors and Actuators, B: Chemical, 2015.
Kruusamäe, K., Sugino, T., Asaka, K. Ionic and viscoelastic mechanisms of a bucky-gel actuator, Journal of Applied Physics, 2015.
Kruusamäe, K., Sugino, T., Asaka, K. Measuring blocking force to interpret ionic mechanisms within bucky-gel actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2015.
Karl Kruusamae, Ken Mukai, Takushi Sugino, Kinji Asaka Electroactive Shape-Fixing of Bucky-Gel Actuators, IEEE/ASME Transactions on Mechatronics, 2015.
Horiuchi, T., Kruusamäe, K., Zhu, Z., Asaka, K. Evaluating curvature and making picture-overlaid trajectory of motion of largely bent carbon nanotube composite bucky gel actuator using camera measurement system, Sensors and Actuators, A: Physical, 2015.
Karl Kruusamäe, Andres Punning, Alvo Aabloo, Kinji Asaka Self-Sensing Ionic Polymer Actuators: A Review, Actuators, 2015.
Girinath Pillai, Lauri Sikk, Tarmo Tamm, Mati Karelson, Peeter Burk, Kaido Tamm Theoretical Modeling of HPV: QSAR and Novodesign with Fragment Approach, Current Computer Aided-Drug Design, 2015.
Kaur Leemets, Tonis Terasmaa, Paul Jaakson, Alar Kume, Tarmo Tamm Development of A Smart Insole System for Gait and Performance Monitoring, Proceedings of the 2015 International Conference on Material Science and Applications, 2015.

2014

Kiefer, R., Aydemir, N., Torop, J., Tamm, T., Temmer, R., Travas-Sejdic, J., Must, I., Kaasik, F., Aabloo, A. Carbide-derived carbon as active interlayer of polypyrrole tri-layer linear actuator, Sensors and Actuators, B: Chemical, 2014.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Kaasik, F., Torop, J., Rinne, P., Lulla, T., Johanson, U., Tamm, T., Aabloo, A. Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2014.
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.
Kaasik, F., Must, I., Lust, E., Jürgens, M., Presser, V., Punning, A., Temmer, R., Kiefer, R., Aabloo, A. In situ measurements with CPC micro-actuators using SEM, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Must, I., Vunder, V., Kaasik, F., Põldsalu, I., Johanson, U., Punning, A., Aabloo, A. Ionic liquid-based actuators working in air: The effect of ambient humidity, Sensors and Actuators, B: Chemical, 2014.
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. Pulse-width-modulated charging of ionic and capacitive actuators, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2014.
Tamm, T., Tiimus, T., Leemets, K., Terasmaa, T., Must, I. Smart insole sensors for sports and rehabilitation, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Zadin, V., Pohjonen, A., Aabloo, A., Nordlund, K., Djurabekova, F. Electrostatic-elastoplastic simulations of copper surface under high electric fields, Physical Review Special Topics - Accelerators and Beams, 2014.
Kiefer, R., Aydemir, N., Torop, J., Kilmartin, P.A., Tamm, T., Kaasik, F., Kesküla, A., Travas-Sejdic, J., Aabloo, A. Carbide-derived Carbon (CDC) linear actuator properties in combination with conducting polymers, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Kiefer, R., Kiveste, H., Punning, A., Kesküla, A., Lulla, T., Aabloo, A. Autofocus fluid lens device construction and implementation of modified ionic polymer metal composite (IPMC) membrane actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Kiefer, R., Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A. Chitosan combined with conducting polymers for novel functionality: Antioxidant and antibacterial activity, Key Engineering Materials, 2014.
Kiefer, R., Temmer, R., Aydemir, N., Travas-Sejdic, J., Aabloo, A., Tamm, T. Electrochemistry of interlayer supported polypyrrole tri-layer linear actuators, Electrochimica Acta, 2014.
Vunder, V., Itik, M., Põldsalu, I., Punning, A., Aabloo, A. Inversion-based control of ionic polymer-metal composite actuators with nanoporous carbon-based electrodes, Smart Materials and Structures, 2014.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Kaasik, F., Torop, J., Rinne, P., Lulla, T., Johanson, U., Tamm, T., Aabloo, A. Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2014.
Doule, O., Imhof, B., Hoheneder, W., Ransom, S., Waclavicek, R., Kull, P., Aabloo, A., Weiss, P., Taillebot, V., Gardette, B., Gobert, T., Gancet, J., Letier, P., Rodriguez, G., Salini, J., Nelson, J., Welch, C., Gajdoš, P., Ševčík, D. Self-deployable habitat for extreme environments-universal platform for analog research, AIAA SPACE 2014 Conference and Exposition, 2014.
Pugal, D., Solin, P., Kim, K.J., Aabloo, A. Hp-FEM electromechanical transduction model of ionic polymer-metal composites, Journal of Computational and Applied Mathematics, 2014.
Bläckberg, L., Metsanurk, E., Tamm, A., Aabloo, A., Klintenberg, M. Molecular dynamics study of xenon on an amorphous Al2O 3 surface, Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2014.
Palmre, V., Pugal, D., Kim, K.J., Leang, K.K., Asaka, K., Aabloo, A. Nanothorn electrodes for ionic polymer-metal composite artificial muscles, Scientific Reports, 2014.
Kaasik, F., Must, I., Lust, E., Jürgens, M., Presser, V., Punning, A., Temmer, R., Kiefer, R., Aabloo, A. In situ measurements with CPC micro-actuators using SEM, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Torop, J., Arulepp, M., Sugino, T., Asaka, K., Jänes, A., Lust, E., Aabloo, A. Microporous and mesoporous carbide-derived carbons for strain modification of electromechanical actuators, Langmuir, 2014.
Aydemir, N., Tamm, T., Travas-Sejdic, J., Kilmartin, P.A., Aabloo, A., Kiefer, R. Electrochemomechanical deformation (ECMD) of PPyDBS in free standing film formation and trilayer designs, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Zadin, V., Pohjonen, A., Aabloo, A., Nordlund, K., Djurabekova, F. Electrostatic-elastoplastic simulations of copper surface under high electric fields, Physical Review Special Topics - Accelerators and Beams, 2014.
Kilmartin, P.A., Travas-Sejdic, J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. PEDOT-PSS/MWCNT coatings on PET for conducting polymer actuators, International Journal of Nanotechnology, 2014.
Brandell, D., Kasemägi, H., Tamm, T., Aabloo, A. Molecular dynamics modeling the Li-PolystyreneTFSI/PEO blend, Solid State Ionics, 2014.
Kasemägi, H., Ollikainen, M., Brandell, D., Aabloo, A. Molecular Dynamics Modelling of Block-Copolymer Electrolytes with High t₊ Values, Electrochimica Acta, 2014.
Rasti, P., Lusi, I., Sahakyan, A., Traumann, A., Bolotnikova, A., Daneshmand, M., Kiefer, R., Aabloo, A., Anbarjafar, G., Demirel, H., Ozcinar, C. Modified Back Projection Kernel Based Image Super Resolution, Proceedings - 2nd International Conference on Artificial Intelligence, Modelling, and Simulation, AIMS 2014, 2014.
Must, I., Kaasik, F., Põldsalu, I., Mihkels, L., Johanson, U., Punning, A., Aabloo, A. Pulse-width-modulated charging of ionic and capacitive actuators, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2014.
Must, I., Vunder, V., Kaasik, F., Põldsalu, I., Johanson, U., Punning, A., Aabloo, A. Ionic liquid-based actuators working in air: The effect of ambient humidity, Sensors and Actuators, B: Chemical, 2014.
Vunder, V., Itik, M., Punning, A., Aabloo, A. Force control of ionic polymer-metal composite actuators with carbonbased electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Metsanurk, E., Tamm, A., Caro, A., Aabloo, A., Klintenberg, M. First-principles study of point defects at a semicoherent interface, Scientific Reports, 2014.
Torop, J., Aabloo, A., Jager, E.W.H. Novel actuators based on polypyrrole/carbide-derived carbon hybrid materials, Carbon, 2014.
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.
Kiefer, R., Aydemir, N., Torop, J., Tamm, T., Temmer, R., Travas-Sejdic, J., Must, I., Kaasik, F., Aabloo, A. Carbide-derived carbon as active interlayer of polypyrrole tri-layer linear actuator, Sensors and Actuators, B: Chemical, 2014.
Tarkanovskaja, M., Välbe, R., Põhako-Esko, K., Mäeorg, U., Reedo, V., Hoop, A., Saal, K., Krumme, A., Kink, I., Heinmaa, I., Lõhmus, A. Novel homogeneous gel fibers and capillaries from blend of titanium tetrabutoxide and siloxane functionalized ionic liquid, Ceramics International, 2014.
Taaber, T., Põhako-Esko, K., Joost, U., Külasalu, K., Antsov, M., Antonov, M., Veinthal, R., Saal, K., Lõhmus, R., Mäeorg, U. Covalent coupling of ionic liquid to carbon nanotubes: Preparation and tribological properties, Materials Research Society Symposium Proceedings, 2014.
Torop, J., Arulepp, M., Sugino, T., Asaka, K., Jänes, A., Lust, E., Aabloo, A. Microporous and mesoporous carbide-derived carbons for strain modification of electromechanical actuators, Langmuir, 2014.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Kaasik, F., Torop, J., Rinne, P., Lulla, T., Johanson, U., Tamm, T., Aabloo, A. Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2014.
Torop, J., Aabloo, A., Jager, E.W.H. Novel actuators based on polypyrrole/carbide-derived carbon hybrid materials, Carbon, 2014.
Kiefer, R., Aydemir, N., Torop, J., Tamm, T., Temmer, R., Travas-Sejdic, J., Must, I., Kaasik, F., Aabloo, A. Carbide-derived carbon as active interlayer of polypyrrole tri-layer linear actuator, Sensors and Actuators, B: Chemical, 2014.
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.
Kiefer, R., Aydemir, N., Torop, J., Kilmartin, P.A., Tamm, T., Kaasik, F., Kesküla, A., Travas-Sejdic, J., Aabloo, A. Carbide-derived Carbon (CDC) linear actuator properties in combination with conducting polymers, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.
Punning, A., Kim, K.J., Palmre, V., Vidal, F., Plesse, C., Festin, N., Maziz, A., Asaka, K., Sugino, T., Alici, G., Spinks, G., Wallace, G., Must, I., Pï¿½ldsalu, I., Vunder, V., Temmer, R., Kruusamï¿½e, K., Torop, J., Kaasik, F., Rinne, P., Johanson, U., Peikolainen, A.-L., Tamm, T., Aabloo, A. Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.
Karl Kruusamäe, Ken Mukai, Takushi Sugino, Kinji Asaka Impact of viscoelastic properties on bucky-gel actuator performance, Journal of Intelligent Material Systems and Structures, 2014.
Andres Punning, Indrek Must, Inga Põldsalu, Veiko Vunder, Rauno Temmer, Karl Kruusamäe, Friedrich Kaasik, Janno Torop, Pille Rinne, Tõnis Lulla, Urmas Johanson, Tarmo Tamm, Alvo Aabloo Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2014.
Kruusamäe, K., Mukai, K., Sugino, T., Asaka, K. The viscoelastic effect in bending bucky-gel actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Kruusamäe, K., Mukai, K., Sugino, T., Asaka, K. Mechanical behaviour of bending bucky-gel actuators and its representation, Smart Materials and Structures, 2014.
Kiefer, R., Aydemir, N., Torop, J., Kilmartin, P.A., Tamm, T., Kaasik, F., Kesküla, A., Travas-Sejdic, J., Aabloo, A. Carbide-derived Carbon (CDC) linear actuator properties in combination with conducting polymers, Proceedings of SPIE - The International Society for Optical Engineering, 2014.
Brandell, D., Kasemägi, H., Tamm, T., Aabloo, A. Molecular dynamics modeling the Li-PolystyreneTFSI/PEO blend, Solid State Ionics, 2014.
Tarmo Tamm, Karel Pärlin, Tõnis Tiimus, Kaur Leemets, Tõnis Terasmaa, Indrek Must, Vijay K. Varadan Smart insole sensors for sports and rehabilitation, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2014, 2014.
Kiefer, R., Aydemir, N., Torop, J., Tamm, T., Temmer, R., Travas-Sejdic, J., Must, I., Kaasik, F., Aabloo, A. Carbide-derived carbon as active interlayer of polypyrrole tri-layer linear actuator, Sensors and Actuators, B: Chemical, 2014.
T. Raudsepp, M. Marandi, T. Tamm, V. Sammelselg, J. Tamm Influence of ion-exchange on the electrochemical properties of polypyrrole films, Electrochimica Acta, 2014.
Rudolf Kiefer, Rauno Temmer, Nihan Aydemir, Jadranka Travas-Sejdic, Alvo Aabloo, Tarmo Tamm Electrochemistry of interlayer supported polypyrrole tri-layer linear actuators, Electrochimica Acta, 2014.
Nihan Aydemir, Tarmo Tamm, Jadranka Travas-Sejdic, Paul A. Kilmartin, Alvo Aabloo, Rudolf Kiefer, Yoseph Bar-Cohen Electrochemomechanical deformation (ECMD) of PPyDBS in free standing film formation and trilayer designs, Electroactive Polymer Actuators and Devices (EAPAD) 2014, 2014.
Kiefer, R., Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A. Chitosan combined with conducting polymers for novel functionality: Antioxidant and antibacterial activity, Key Engineering Materials, 2014.
Kilmartin, P.A., Travas-Sejdic, J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. PEDOT-PSS/MWCNT coatings on PET for conducting polymer actuators, International Journal of Nanotechnology, 2014.
Rudolf Kiefer, Rong Jer Lee, Rauno Temmer, Tarmo Tamm, Alvo Aabloo Chitosan Combined with Conducting Polymers for Novel Functionality: Antioxidant and Antibacterial Activity, Key Engineering Materials, 2014.
Punning, A., Must, I., Põldsalu, I., Vunder, V., Temmer, R., Kruusamäe, K., Kaasik, F., Torop, J., Rinne, P., Lulla, T., Johanson, U., Tamm, T., Aabloo, A. Lifetime measurements of ionic electroactive polymer actuators, Journal of Intelligent Material Systems and Structures, 2014.
Andres Punning, Kwang J. Kim, Viljar Palmre, Frédéric Vidal, Cédric Plesse, Nicolas Festin, Ali Maziz, Kinji Asaka, Takushi Sugino, Gursel Alici, Geoff Spinks, Gordon Wallace, Indrek Must, Inga Põldsalu, Veiko Vunder, Rauno Temmer, Karl Kruusamäe, Janno Torop, Friedrich Kaasik, Pille Rinne, Urmas Johanson, Anna-Liisa Peikolainen, Tarmo Tamm, Alvo Aabloo Ionic electroactive polymer artificial muscles in space applications, Scientific Reports, 2014.

2013

Must, I., Johanson, U., Kaasik, F., Põldsalu, I., Punning, A., Aabloo, A. Charging a supercapacitor-like laminate with ambient moisture: From a humidity sensor to an energy harvester, Physical Chemistry Chemical Physics, 2013.
Must, I., Johanson, U., Kaasik, F., Poldsalu, I., Punning, A., Aabloo, A. An ionic liquid-based actuator as a humidity sensor, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013, 2013.
Must, I., Anton, M., Viidalepp, E., Põldsalu, I., Punning, A., Aabloo, A. Mechanoelectrical impedance of a carbide-derived carbon-based laminate motion sensor at large bending deflections, Smart Materials and Structures, 2013.
Zadin, V., Brandell, D., Kasemägi, H., Lellep, J., Aabloo, A. Designing the 3D-microbattery geometry using the level-set method, Journal of Power Sources, 2013.
Lee, R.-J., Tamm, T., Temmer, R., Aabloo, A., Kiefer, R. Two formation mechanisms and renewable antioxidant properties of suspensible chitosan-PPy and chitosan-PPy-BTDA composites, Synthetic Metals, 2013.
Kaasik, F., Tamm, T., Hantel, M.M., Perre, E., Aabloo, A., Lust, E., Bazant, M.Z., Presser, V. Anisometric charge dependent swelling of porous carbon in an ionic liquid, Electrochemistry Communications, 2013.
Must, I., Anton, M., Viidalepp, E., Põldsalu, I., Punning, A., Aabloo, A. Mechanoelectrical impedance of a carbide-derived carbon-based laminate motion sensor at large bending deflections, Smart Materials and Structures, 2013.
Zadin, V., Brandell, D., Kasemägi, H., Lellep, J., Aabloo, A. Designing the 3D-microbattery geometry using the level-set method, Journal of Power Sources, 2013.
Kruusamäe, K., Kaasik, F., Punning, A., Aabloo, A. Self-sensing ionic electromechanically active actuator with patterned carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2013.
Must, I., Johanson, U., Kaasik, F., Põldsalu, I., Punning, A., Aabloo, A. Charging a supercapacitor-like laminate with ambient moisture: From a humidity sensor to an energy harvester, Physical Chemistry Chemical Physics, 2013.
Kiefer, R., Temmer, R., Tamm, T., Travas-Sejdic, J., Kilmartin, P.A., Aabloo, A. Conducting polymer actuators formed on MWCNT and PEDOT-PSS conductive coatings, Synthetic Metals, 2013.
Temmer, R., Maziz, A., Plesse, C., Aabloo, A., Vidal, F., Tamm, T. In search of better electroactive polymer actuator materials: PPy versus PEDOT versus PEDOT-PPy composites, Smart Materials and Structures, 2013.
Kosidlo, U., Omastova, M., Micusik, M., Ciric-Marjanovic, G., Randriamahazaka, H., Wallmersperger, T., Aabloo, A., Kolaric, I., Bauernhansl, T. Nanocarbon based ionic actuators-a review, Smart Materials and Structures, 2013.
Kiefer, R., Weis, D.G., Aabloo, A., Urban, G., Heinze, J. Dependence of polypyrrole bilayer deflection upon polymerization potential, Synthetic Metals, 2013.
Temmer, R., Kiefer, R., Aabloo, A., Tamm, T. Direct chemical synthesis of pristine polypyrrole hydrogels and their derived aerogels for high power density energy storage applications, Journal of Materials Chemistry A, 2013.
Must, I., Johanson, U., Kaasik, F., Poldsalu, I., Punning, A., Aabloo, A. An ionic liquid-based actuator as a humidity sensor, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013, 2013.
Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. Renewable antioxidant properties of suspensible chitosan-polypyrrole composites, Reactive and Functional Polymers, 2013.
Travas-Sejdic, J., Tamm, T., Kilmartin, P.A., Temmer, R., Aabloo, A., Kiefer, R. PEDOT/TBACF3SO3 bending actuators based on a PEDOT-PEDOT sandwich complex, Proceedings of SPIE - The International Society for Optical Engineering, 2013.
Vunder, V., Punning, A., Aabloo, A. Viscoelastic model of IPMC actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2013.
Brandell, D., Jõemetsa, S., Kasemägi, H., Aabloo, A. Molecular Dynamics modelling a small-molecule crystalline electrolyte: LiBF4(CH3O(CH2CH2O) 4CH3)0.5, Electrochimica Acta, 2013.
CMUT ultrasonic power link front-end for wireless power transfer deep in body, 2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO), 2013.
Põhako-Esko, K., Taaber, T., Saal, K., Lõhmus, R., Kink, I., Mäeorg, U. New method for synthesis of methacrylate-type polymerizable ionic liquids, Synthetic Communications, 2013.
Tamm, A., Peikolainen, A.-L., Kozlova, J., Aarik, L., Roosalu, K., Kärkkänen, I., Mändar, Aarik, J., Kukli, K. Atomic layer deposition of zirconium oxide on carbon nanoparticles, IOP Conference Series: Materials Science and Engineering, 2013.
Tamm, A., Peikolainen, A.-L., Kozlova, J., Mändar, H., Aidla, A., Rammula, R., Aarik, L., Roosalu, K., Lu, J., Hultman, L., Koel, M., Kukli, K., Aarik, J. Atomic layer deposition of high-k dielectrics on carbon nanoparticles, Thin Solid Films, 2013.
Kruusamäe, K., Kaasik, F., Punning, A., Aabloo, A. Self-sensing ionic electromechanically active actuator with patterned carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2013.
Einike Pilli, Marek Sammul, Piia Post, Ülle Aasjõe, Karl Kruusamäe Eesti kõrgkoolide esmakursuslaste õpi- ja teadmuskäsitus, Eesti Haridusteaduste Ajakiri = Estonian Journal of Education, 2013.
Travas-Sejdic, J., Tamm, T., Kilmartin, P.A., Temmer, R., Aabloo, A., Kiefer, R. PEDOT/TBACF₃SO₃bending actuators based on a PEDOT-PEDOT sandwich complex, Proceedings of SPIE - The International Society for Optical Engineering, 2013.
Lee, R.-J., Temmer, R., Tamm, T., Aabloo, A., Kiefer, R. Renewable antioxidant properties of suspensible chitosan-polypyrrole composites, Reactive and Functional Polymers, 2013.
Jadranka Trava-Sejdic, Tarmo Tamm, Paul A. Kilmartin, Rauno Temmer, Alvo Aabloo, Rudolf Kiefer, Yoseph Bar-Cohen PEDOT/TBACF3SO3bending actuators based on a PEDOT-PEDOT sandwich complex, Electroactive Polymer Actuators and Devices (EAPAD) 2013, 2013.
Kaasik, F., Tamm, T., Hantel, M.M., Perre, E., Aabloo, A., Lust, E., Bazant, M.Z., Presser, V. Anisometric charge dependent swelling of porous carbon in an ionic liquid, Electrochemistry Communications, 2013.
Temmer, R., Maziz, A., Plesse, C., Aabloo, A., Vidal, F., Tamm, T. In search of better electroactive polymer actuator materials: PPy versus PEDOT versus PEDOT-PPy composites, Smart Materials and Structures, 2013.
Rong-Jer Lee, Rauno Temmer, Tarmo Tamm, Alvo Aabloo, Rudolf Kiefer Renewable antioxidant properties of suspensible chitosan–polypyrrole composites, Reactive and Functional Polymers, 2013.
Lee, R.-J., Tamm, T., Temmer, R., Aabloo, A., Kiefer, R. Two formation mechanisms and renewable antioxidant properties of suspensible chitosan-PPy and chitosan-PPy-BTDA composites, Synthetic Metals, 2013.
Rauno Temmer, Rudolf Kiefer, Alvo Aabloo, Tarmo Tamm Direct chemical synthesis of pristine polypyrrole hydrogels and their derived aerogels for high power density energy storage applications, Journal of Materials Chemistry A, 2013.
Dimaitar A. Dobchev, Indrek Tulp, Gunnar Karelson, Tarmo Tamm, Kaido Tämm, Mati Karelson Subchronic Oral and Inhalation Toxicities: a Challenging Attempt for Modeling and Prediction, Molecular Informatics, 2013.
Rudolf Kiefer, Rauno Temmer, Tarmo Tamm, Jadranka Travas-Sejdic, Paul A. Kilmartin, Alvo Aabloo Conducting polymer actuators formed on MWCNT and PEDOT-PSS conductive coatings, Synthetic Metals, 2013.

2012

Must, I., Kaasik, F., Poldsalu, I., Johanson, U., Punning, A., Aabloo, A. Carbon-polymer-ionic liquid composite as a motion sensor, Proceedings of SPIE - The International Society for Optical Engineering, 2012.
Must, I., Kaasik, F., Põldsalu, I., Johanson, U., Punning, A., Aabloo, A. A carbide-derived carbon laminate used as a mechanoelectrical sensor, Carbon, 2012.
Temmer, R., Must, I., Kaasik, F., Aabloo, A., Tamm, T. Combined chemical and electrochemical synthesis methods for metal-free polypyrrole actuators, Sensors and Actuators, B: Chemical, 2012.
Kaasik, F., Torop, J., Must, I., Soolo, E., Põldsalu, I., Peikolainen, A.-L., Palmre, V., Aabloo, A. Ionic EAP transducers with amorphous nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2012.
Zadin, V., Danilov, D., Brandell, D., Notten, P.H.L., Aabloo, A. Finite element simulations of 3D ionic transportation properties in Li-ion electrolytes, Electrochimica Acta, 2012.
Must, I. Carbon-Polymer-Ionic Liquid Composite as a Motion Sensor, Electroactive Polymer Actuators and Devices, 2012.
Vunder, V., Punning, A., Aabloo, A. Back-relaxation of carbon-based ionic electroactive polymer actuators, ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012, 2012.
A carbide-derived carbon laminate used as a mechanoelectrical sensor, Carbon, 2012.
Kaasik, F. Ionic EAP transducers with amorphous nanoporous carbon electrodes, Electroactive Polymer Actuators and Devices, 2012.
Pugal, D. Physics based electromechanical model of IPMC considering various underlying currents, Electroactive Polymer Actuators and Devices, 2012.
Torop, Janno Low-voltage bending actuators from carbide-derived carbon improved with gold foil, Electroactive Polymer Actuators and Devices (Eapad) 2012, 2012.
Combined chemical and electrochemical synthesis methods for metal-free polypyrrole actuators, Sensors and Actuators, B: Chemical, 2012.
Nanoporous carbide-derived carbon based actuators modified with gold foil: Prospect for fast response and low voltage applications, Sensors and Actuators, B: Chemical, 2012.
Impact of carbon nanotube additives on carbide-derived carbon-based electroactive polymer actuators, Carbon, 2012.
Electrical model of a carbon-polymer composite (CPC) collision detector, Sensors, 2012.
Modeling ionic polymer-metal composites with space-time adaptive multimesh hp-FEM, Communications in Computational Physics, 2012.
Mechanical interpretation of back-relaxation of ionic electroactive polymer actuators, Smart Materials and Structures, 2012.
Molecular dynamics simulations of EMI-BF 4 in nanoporous carbon actuators, Journal of Molecular Modeling, 2012.
Finite element simulations of 3D ionic transportation properties in Li-ion electrolytes, Electrochimica Acta, 2012.
Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body, , 2012.
Torop, J., Sugino, T., Asaka, K., Jänes, A., Lust, E., Arulepp, M., Aabloo, A. Low-voltage bending actuators from carbide-derived carbon improved with gold foil, Proceedings of SPIE - The International Society for Optical Engineering, 2012.
Kaasik, F., Torop, J., Must, I., Soolo, E., Põldsalu, I., Peikolainen, A.-L., Palmre, V., Aabloo, A. Ionic EAP transducers with amorphous nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2012.
Torop, J., Sugino, T., Asaka, K., Jänes, A., Lust, E., Aabloo, A. Nanoporous carbide-derived carbon based actuators modified with gold foil: Prospect for fast response and low voltage applications, Sensors and Actuators, B: Chemical, 2012.
Palmre, V., Torop, J., Arulepp, M., Sugino, T., Asaka, K., Jänes, A., Lust, E., Aabloo, A. Impact of carbon nanotube additives on carbide-derived carbon-based electroactive polymer actuators, Carbon, 2012.
Peikolainen, A.-L., Volobujeva, O., Aav, R., Uibu, M., Koel, M. Organic acid catalyzed synthesis of 5-methylresorcinol based organic aerogels in acetonitrile, Journal of Porous Materials, 2012.
Laheäär, A., Peikolainen, A.-L., Koel, M., Jänes, A., Lust, E. Comparison of carbon aerogel and carbide-derived carbon as electrode materials for non-aqueous supercapacitors with high performance, Journal of Solid State Electrochemistry, 2012.
Kaasik, F., Torop, J., Must, I., Soolo, E., Põldsalu, I., Peikolainen, A.-L., Palmre, V., Aabloo, A. Ionic EAP transducers with amorphous nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2012.
Kruusamäe, K., Punning, A., Aabloo, A. Electrical model of a carbon-polymer composite (CPC) collision detector, Sensors, 2012.
Rauno Temmer, Indrek Must, Friedrich Kaasik, Alvo Aabloo, Tarmo Tamm Combined chemical and electrochemical synthesis methods for metal-free polypyrrole actuators, Sensors and Actuators B: Chemical, 2012.
Mati Karelson, Dimitar A. Dobchev, Gunnar Karelson, Tarmo Tamm, Kaido Tamm, Andrei Nikonov, Margit Mutso, Andres Merits Fragment-Based Development of HCV Protease Inhibitors for the Treatment of Hepatitis C, Current Computer Aided-Drug Design, 2012.
Tóth, P.S., Janáky, C., Berkesi, O., Tamm, T., Visy, C. On the unexpected cation exchange behavior, caused by covalent bond formation between PEDOT and Cl^-ions: Extending the conception for the polymer-dopant interactions, Journal of Physical Chemistry B, 2012.

2011

Zadin, V., Brandell, D., Kasemägi, H., Aabloo, A., Thomas, J.O. Finite element modelling of ion transport in the electrolyte of a 3D-microbattery, Solid State Ionics, 2011.
Zadin, V., Brandell, D. Modelling polymer electrolytes for 3D-microbatteries using finite element analysis, Electrochimica Acta, 2011.
Electromechanical model for a self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Smart Materials and Structures, 2011.
Finite element modelling of ion transport in the electrolyte of a 3D-microbattery, Solid State Ionics, 2011.
Carbon aerogel based electrode material for EAP actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Branched polyethylene/poly(ethylene oxide) as a host matrix for Li-ion battery electrolytes: A molecular dynamics study, Electrochimica Acta, 2011.
Flexible supercapacitor-like actuator with carbide-derived carbon electrodes, Carbon, 2011.
Electroactive polymer actuators with carbon aerogel electrodes, Journal of Materials Chemistry, 2011.
An explicit physics-based model of ionic polymer-metal composite actuators, Journal of Applied Physics, 2011.
Educational robotics and inquiry learning: A pilot study in a web-based learning environment, Proceedings of the 2011 11th IEEE International Conference on Advanced Learning Technologies, ICALT 2011, 2011.
Self-sensing properties of carbon-polymer composite (CPC) actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
A novel hp-FEM model for IPMC actuation, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Variable-focal lens using electroactive polymer actuator, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Face recognition using K2DSPCA, Proceedings of the International Conference on Information and Network Technology, 2011.
Shulga, E., Pohako, K., Treshchalov, A., Joost, U., Kisand, V., Kink, I. Functionalisation of aligned carbon nanotubes with nitric acid vapour, Micro and Nano Letters, 2011.
Põhako, K., Saal, K., Bredihhin, A., Kink, I., Mäeorg, U. A new method for the synthesis of 3-hydrazinopropyl trimethoxysilane, Proceedings of the Estonian Academy of Sciences, 2011.
Kaasik, F., Torop, J., Peikolainen, A.-L., Koel, M., Aabloo, A. Carbon aerogel based electrode material for EAP actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Torop, J., Palmre, V., Arulepp, M., Sugino, T., Asaka, K., Aabloo, A. Flexible supercapacitor-like actuator with carbide-derived carbon electrodes, Carbon, 2011.
Palmre, V., Lust, E., Jänes, A., Koel, M., Peikolainen, A.-L., Torop, J., Johanson, U., Aabloo, A. Electroactive polymer actuators with carbon aerogel electrodes, Journal of Materials Chemistry, 2011.
Palmre, V., Lust, E., Jänes, A., Koel, M., Peikolainen, A.-L., Torop, J., Johanson, U., Aabloo, A. Electroactive polymer actuators with carbon aerogel electrodes, Journal of Materials Chemistry, 2011.
Kaasik, F., Torop, J., Peikolainen, A.-L., Koel, M., Aabloo, A. Carbon aerogel based electrode material for EAP actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Kruusamäe, K., Punning, A., Aabloo, A. Self-sensing properties of carbon-polymer composite (CPC) actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2011.
Kruusamäe, K., Brunetto, P., Punning, A., Kodu, M., Jaaniso, R., Graziani, S., Fortuna, L., Aabloo, A. Electromechanical model for a self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Smart Materials and Structures, 2011.
Katritzky, A.R., Stoyanova-Slavova, I.B., Tämm, K., Tamm, T., Karelson, M. Application of the QSPR approach to the boiling points of azeotropes, Journal of Physical Chemistry A, 2011.
Endel Soolo, Daniel Brandell, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Alvo Aabloo Molecular dynamics simulations of EMI-BF4 in nanoporous carbon actuators, Journal of Molecular Modeling, 2011.

2010

Zadin, V., Kasemägi, H., Aabloo, A., Brandell, D. Modelling electrode material utilization in the trench model 3D-microbattery by finite element analysis, Journal of Power Sources, 2010.
Self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Polymer International, 2010.
Torop, Janno Nanoporous Carbide-Derived Carbon Material-Based Linear Actuators, Materials, 2010.
Pugal, David Ionic polymer-metal composite mechanoelectrical transduction: review and perspectives (p n/a) (vol 59, pg 279, 2010), Polymer International, 2010.
Molecular dynamics modeling of proton transport in nafion and hyflon nanostructures, Journal of Physical Chemistry B, 2010.
Karo, J Molecular Dynamics Modeling of Proton Transport in Nation and Hylton Nanostructures, Journal of Physical Chemistry B, 2010.
Torop, J Nanoporous Carbide-derived Carbon Material for Bending Actuators, Actuator 10, Conference Proceedings, 2010.
Ionic polymer-metal composite mechanoelectrical transduction: Review and perspectives, Polymer International, 2010.
Ionic polymer metal composites with nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Experiments with self-sensing IPMC actuating device, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Poly(ethylene oxide)-poly(butadiene) interpenetrated networks as electroactive polymers for actuators: A molecular dynamics study, Electrochimica Acta, 2010.
Modeling the transduction of IPMC in 3D configurations, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Force field generation and molecular dynamics simulations of Li+-Nafion, Electrochimica Acta, 2010.
Electromechanical characteristics of actuators based on carbide-derived carbon, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Modelling electrode material utilization in the trench model 3D-microbattery by finite element analysis, Journal of Power Sources, 2010.
Torop, J., Kaasik, F., Sugino, T., Aabloo, A., Asaka, K. Electromechanical characteristics of actuators based on carbide-derived carbon, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Palmre, V., Brandell, D., Mäeorg, U., Torop, J., Volobujeva, O., Punning, A., Johanson, U., Aabloo, A. Ionic polymer metal composites with nanoporous carbon electrodes, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Torop, J., Arulepp, M., Leis, J., Punning, A., Johanson, U., Palmre, V., Aabloo, A. Nanoporous carbide-derived carbon material-based linear actuators, Materials, 2010.
Kruusamäe, K., Brunetto, P., Graziani, S., Fortuna, L., Kodu, M., Jaaniso, R., Punning, A., Aabloo, A. Experiments with self-sensing IPMC actuating device, Proceedings of SPIE - The International Society for Optical Engineering, 2010.
Kruusamäe, K., Brunetto, P., Graziani, S., Punning, A., Di Pasquale, G., Aabloo, A. Self-sensing ionic polymer-metal composite actuating device with patterned surface electrodes, Polymer International, 2010.
Endel Soolo, Daniel Brandell, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Alvo Aabloo Force field generation and molecular dynamics simulations of Li+–Nafion, Electrochimica Acta, 2010.
Raudsepp, T., Marandi, M., Tamm, T., Sammelselg, V., Tamm, J. Redoping - A simple way to enhance the redoxcapacity of polypyrrole films, Electrochemistry Communications, 2010.
T. Raudsepp, M. Marandi, T. Tamm, V. Sammelselg, J. Tamm Redoping — A simple way to enhance the redoxcapacity of polypyrrole films, Electrochemistry Communications, 2010.
Soolo, E., Brandell, D., Liivat, A., Kasemägi, H., Tamm, T., Aabloo, A. Force field generation and molecular dynamics simulations of Li⁺-Nafion, Electrochimica Acta, 2010.
Dimitar A. Dobchev, Imre Mager, Indrek Tulp, Gunnar Karelson, Tarmo Tamm, Kaido Tamm, Jaak Janes, Ulo Langel, Mati Karelson Prediction of Cell-Penetrating Peptides Using Artificial Neural Networks, Current Computer Aided-Drug Design, 2010.

2009

Must, I., Antona, M., Kruusmaa, M., Aabloo, A. Linear modeling of elongated bending EAP actuator at large deformations, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Pugal, D MODELING IPMC MATERIAL WITH DYNAMIC SURFACE CHARACTERISTICS, Smasis2009, Vol 2, 2009.
Dynamical variation of the impedances of IPMC, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Linear modeling of elongated bending EAP actuator at large deformations, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Punning, A. A Distributed Model of Ionomeric Polymer Metal Composite, Journal of Intelligent Material Systems and Structures, 2009.
Dynamic surface resistance model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Low voltage linear actuators based on carbide-derived carbon powder, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Nanoporous carbon-based electrodes for high strain ionomeric bending actuators, Smart Materials and Structures, 2009.
Johanson, U Electrode reactions in Cu-Pt coated Nafion (R) actuators, Artificial Muscle Actuators Using Electroactive Polymers, 2009.
Kessler, F., Szesni, N., Põhako, K., Weibert, B., Fischer, H. Synthesis of the first stable palladium allenylidene complexes, Organometallics, 2009.
Torop, J., Arulepp, M., Leis, J., Punning, A., Johanson, U., Aabloo, A. Low voltage linear actuators based on carbide-derived carbon powder, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Palmre, V., Brandell, D., Mäeorg, U., Torop, J., Volobujeva, O., Punning, A., Johanson, U., Kruusmaa, M., Aabloo, A. Nanoporous carbon-based electrodes for high strain ionomeric bending actuators, Smart Materials and Structures, 2009.
Pérez-Caballero, F., Peikolainen, A.-L., Uibu, M., Herbert, M., Galindo, A., Montilla, F., Koel, M. Oil shale phenol-derived aerogels as supports for palladium nanoparticles, Oil Shale, 2009.
Kruusamäe, K., Punninga, A., Kruusmaa, M., Aabloo, A. Dynamical variation of the impedances of IPMC, Proceedings of SPIE - The International Society for Optical Engineering, 2009.
Karelson, M., Karelson, G., Tamm, T., Tulpg, I., Jänes, J., Tämm, K., Lomaka, A., Savchenko, D., Dobchev, D. QSAR study of pharmacological permeabilities, Arkivoc, 2009.

2008

Soolo, E. A new force field for molecular dynamics studies of Li/sup +/ and Na/sup +/-nafion, Proceedings of the SPIE - The International Society for Optical Engineering, 2008.
A mechanical model of a non-uniform ionomeric polymer metal composite actuator, Smart Materials and Structures, 2008.
A distributed model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
Self healing properties of Cu-Pt coated ionic polymer actuators, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
A multilink manipulator with IPMC joints, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
A self-oscillating ionic polymer-metal composite bending actuator, Journal of Applied Physics, 2008.
Electrode reactions in Cu-Pt coated Nafion® actuators, CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Artificial Muscle Actuators using Electroactive Polymers, 2008.
A new force field for molecular dynamics studies of Li+ and Na+-nafion, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
A linked manipulator with Ion-Polymer Metal Composite (IPMC) joints for soft- and micromanipulation, Proceedings - IEEE International Conference on Robotics and Automation, 2008.
An advanced finite element model of IPMC, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
Electrode reactions in Cu-Pt coated ionic polymer actuators, Sensors and Actuators, B: Chemical, 2008.
Molecular dynamics studies of interpenetrating polymer networks for actuator devices, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
Põhako, K., Saal, K., Kink, I., Bredihhin, A., Mäeorg, U. Synthesis of allyl hydrazine: A comparative study of different methods, Arkivoc, 2008.
Johanson, U., Mäeorg, U., Brandell, D., Punning, A., Torop, J., Kruusmaa, M., Aabloo, A. Electrode reactions in Cu-Pt coated Nafion® actuators, CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Artificial Muscle Actuators using Electroactive Polymers, 2008.
Pérez-Caballero, F., Peikolainen, A.-L., Uibu, M., Kuusik, R., Volobujeva, O., Koel, M. Preparation of carbon aerogels from 5-methylresorcinol-formaldehyde gels, Microporous and Mesoporous Materials, 2008.
Peikolainen, A.-L., Pérez-Caballero, F., Koel, M. Low-density organic aerogels from oil shale by-product 5-methylresorcinol, Oil Shale, 2008.
Pérez-Caballero, F., Peikolainen, A.-L., Koel, M. Preparation of nanostructured carbon materials, Proceedings of the Estonian Academy of Sciences, 2008.
Soolo, E., Liivat, A., Kasemägi, H., Tamm, T., Brandell, D., Aabloo, A. A new force field for molecular dynamics studies of Li⁺and Na⁺-nafion, Proceedings of SPIE - The International Society for Optical Engineering, 2008.
Endel Soolo, Anti Liivat, Heiki Kasemägi, Tarmo Tamm, Daniel Brandell, Alvo Aabloo, Yoseph Bar-Cohen A new force field for molecular dynamics studies of Li+and Na+-nafion, Electroactive Polymer Actuators and Devices (EAPAD) 2008, 2008.
Karelson, M., Dobchev, D., Tamm, T., Tulp, I., Jänes, J., Tämm, K., Lomaka, A., Savchenko, D., Karelson, G. Correlation of blood-brain penetration and human serum albumin binding with theoretical descriptors, Arkivoc, 2008.
Terje Raudsepp, Margus Marandi, Tarmo Tamm, Väino Sammelselg, Jüri Tamm Study of the factors determining the mobility of ions in the polypyrrole films doped with aromatic sulfonate anions, Electrochimica Acta, 2008.

2007

Zadin, V., Skaburskas, K., Vedru, J. Influence of breathing on Foucault cardiogram origination, IFMBE Proceedings, 2007.
Surface resistance experiments with IPMC sensors and actuators, Sensors and Actuators, A: Physical, 2007.
Finite element simulations of the bending of the IPMC sheet, Proceedings of SPIE - The International Society for Optical Engineering, 2007.
Liivat, A A molecular dynamics study of short-chain ordering in crystalline LiPF6 center dot PEO6, Polymer, 2007.
Pugal, D. Finite element simulations of the bending of the IPMC sheet - art. no. 65240B, Electroactive Polymer Actuators and Devices (EAPAD) 2007, 2007.
A self-sensing ion conducting polymer metal composite (IPMC) actuator, Sensors and Actuators, A: Physical, 2007.
A molecular dynamics study of short-chain ordering in crystalline LiPF6·PEO6, Polymer, 2007.
Põhako, K., Mäeorg, U., Saal, K., Kisseljova, K., Bredihhin, A., Kink, I. A route towards a new hydrazino-ormosil, Journal of Physics: Conference Series, 2007.
Jüri Tamm, Terje Raudsepp, Margus Marandi, Tarmo Tamm Electrochemical properties of the polypyrrole films doped with benzenesulfonate, Synthetic Metals, 2007.

2006

Molecular dynamics simulations of Li- and Na-nafion membranes, Proceedings of SPIE - The International Society for Optical Engineering, 2006.
Punning, A Empirical model of a bending IPMC actuator - art. no. 61681V, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD), 2006.
Brandell, D Molecular Dynamics simulations of Li- and Na-Nafion membranes - art. no. 61680G, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD), 2006.
Soolo, E Application of the Monte Carlo method for creation of initial models of EAP molecules for Molecular Dynamics simulation - art. no. 61682A, Smart Structures and Materials 2006: Electroactive Polymer Actuators and Devices (EAPAD), 2006.
Application of the Monte Carlo method for creation of initial models of EAP molecules for molecular dynamics simulation, Proceedings of SPIE - The International Society for Optical Engineering, 2006.
Empirical model of a bending IPMC actuator, Proceedings of SPIE - The International Society for Optical Engineering, 2006.
Validating usability of ionomeric polymer-metal composite actuators for real world applications, IEEE International Conference on Intelligent Robots and Systems, 2006.

2005

Molecular dynamics simulation of the crystalline short-chain polymer system LiPF6·PEO6 (Mw ∼ 1000), Journal of Materials Chemistry, 2005.
Brandell, D Molecular dynamics simulation of the crystalline short-chain polymer system LiPF6 center dot PEO6 (M-w similar to 1000), Journal of Materials Chemistry, 2005.
Molecular dynamics simulation of the LiPF6·PEO 6 structure, Journal of Materials Chemistry, 2005.
A molecular dynamics study of the effect of side-chains on mobility in a polymer host, Solid State Ionics, 2005.
Heero, K. Learning innovative routes for mobile robots in dynamic partially unknown environments, International Journal of Advanced Robotic Systems, 2005.
Conduction mechanisms in crystalline LiPF6·PEO 6 doped with SiF6 2- and SF6, Chemistry of Materials, 2005.
Brandell, D Conduction mechanisms in crystalline LiPF6 center dot PEO6 doped with SiF62- and SF6, Chemistry of Materials, 2005.
Listak, M Design of a semiautonomous biomimetic underwater vehicle for environmental monitoring., 2005 IEEE International Symposium on Computational Intelligence in Robotics and Automation, Proceedings, 2005.
Listak, M. Design of a semiautonomous biomimetic underwater vehicle for environmental monitoring, Proceedings. 2005 IEEE International Symposium on Computational Intelligence in Robotics and Automation (IEEE Cat. No. 05EX1153), 2005.
Brandell, D Molecular dynamics simulation of the LiPF6 center dot PEO6 structure, Journal of Materials Chemistry, 2005.
An engineering approach to reduced power consumption of IPMC (Ion-Polymer Metal Composite) actuators, 2005 International Conference on Advanced Robotics, ICAR '05, Proceedings, 2005.
Development of a force field for Li 2SiF 6, Journal of Computational Chemistry, 2005.
Tarmo Tamm, Jüri Tamm, Mati Karelson Complexes of oligopyrrole dications with inorganic anions: a comparative theoretical HF/post-HF study, Synthetic Metals, 2005.
U. Johanson, M. Marandi, T. Tamm, J. Tamm Comparative study of the behavior of anions in polypyrrole films, Electrochimica Acta, 2005.

2004

Molecular dynamics simulation of the effect of nanoparticle fillers on ion motion in a polymer host, Solid State Ionics, 2004.
Tamm, Yu., Jokhanson, U., Marandi, M., Tamm, T., Tamm, L. Study of properties of electrodeposited polypyrrole films, Elektrokhimiya, 2004.
J. Tamm, U. Johanson, M. Marandi, T. Tamm, L. Tamm Study of the Properties of Electrodeposited Polypyrrole Films, Russian Journal of Electrochemistry, 2004.
Alan R. Katritzky, Dan C. Fara, Hongfang Yang, Kaido Taemm, Tarmo Tamm, Mati Karelson Quantitative Measures of Solvent Polarity, ChemInform, 2004.

1999

Alan R. Katritzky, Tarmo Tamm, Yilin Wang, Mati Karelson A Unified Treatment of Solvent Properties, Journal of Chemical Information and Computer Sciences, 1999.
Alan R. Katritzky, Tarmo Tamm, Yilin Wang, Sulev Sild, Mati Karelson QSPR Treatment of Solvent Scales, Journal of Chemical Information and Computer Sciences, 1999.
Tarmo Tamm, J�ri Tamm, Mati Karelson <101::aid-qua10>3.0.co;2-z A quantum-mechanical study of oxidized oligopyrroles, International Journal of Quantum Chemistry, 1999.

1998

Molecular modelling of parallel and antiparallel structure of native cellulose, Use of Minerals in Papermaking, 1998.
Packing energy calculations on the crystalline structure of cellulose I, Use of Minerals in Papermaking, 1998.
Molecular dynamics simulation of Nd3+ ions in a crystalline PEO surface, Electrochimica Acta, 1998.
Katritzky, A.R., Wang, Y., Sild, S., Tamm, T., Karelson, M. QSPR studies on vapor pressure, aqueous solubility, and the prediction of water-air partition coefficients, Journal of Chemical Information and Computer Sciences, 1998.

1997

French, A. D. Modeling cellulose, Abstracts of Papers of the American Chemical Society, 1997.
Molecular dynamics simulations of a poly(ethylene oxide) surface, Computational and Theoretical Polymer Science, 1997.

1995

Mikelsaar, R.-H. Parallel and antiparallel models of cellulose, Molecular Materials|Molecular Materials, 1995.

1994

AABLOO, A STUDIES OF CRYSTALLINE NATIVE CELLULOSES USING POTENTIAL-ENERGY CALCULATIONS, Cellulose, 1994.
Aabloo, A., French, A.D. Preliminary potential energy calculations of cellulose iα crystal structure, Macromolecular Theory and Simulations, 1994.
AABLOO, A PRELIMINARY POTENTIAL-ENERGY CALCULATIONS OF CELLULOSE I-ALPHA CRYSTAL-STRUCTURE, Macromolecular Theory and Simulations, 1994.

1993

French, A. D. MINIATURE CRYSTAL MODELS OF CELLULOSE POLYMORPHS AND OTHER CARBOHYDRATES, International Journal of Biological Macromolecules, 1993.

Search

PI Publications By Year

Contents

Publications By Year

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1995

1994

1993