Molecular dynamics studies of poly(ethylene oxide) based electrolytes: Difference between revisions

From Intelligent Materials and Systems Lab

No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 12: Line 12:
===Crystalline polymer electrolytes===
===Crystalline polymer electrolytes===


 
[[Image:LiPF6PEO6 small.png]]


Crystalline phases of polymer electrolytes were long regarded as insulators. This view has been overturned to some extent during recent years by the demonstration of ionic conductivity in the complexes LiXF<sub>6</sub>PEO<sub>6</sub> for X = P, As or Sb. Although the conductivity is still relatively low in these materials, they nevertheless show ca. ten times higher ionic conductivity than their amorphous counterparts. The LiXF<sub>6</sub>PEO<sub>6</sub> complexes also display very fascinating structures – the materials are composed of coaxial hemi-helices of PEO, which pairwise form cylindrical channels containing the lithium ions coordinated to ether-oxygen chains; the anions lie outside the hemi-helical pairs, with no directstructural interaction with the lithium ions (see Fig. 1).
Crystalline phases of polymer electrolytes were long regarded as insulators. This view has been overturned to some extent during recent years by the demonstration of ionic conductivity in the complexes LiXF<sub>6</sub>PEO<sub>6</sub> for X = P, As or Sb. Although the conductivity is still relatively low in these materials, they nevertheless show ca. ten times higher ionic conductivity than their amorphous counterparts. The LiXF<sub>6</sub>PEO<sub>6</sub> complexes also display very fascinating structures – the materials are composed of coaxial hemi-helices of PEO, which pairwise form cylindrical channels containing the lithium ions coordinated to ether-oxygen chains; the anions lie outside the hemi-helical pairs, with no directstructural interaction with the lithium ions (see Fig. 1).
Line 27: Line 27:
Inorganic nano-particles can both prevent PEO from crystallisation ("nano-plasticising"), but also modify the local structure and dynamics of the surrounding polymer and the solvated ions. Our group has investigated a number of PEO systems with Al<sub>2</sub>O<sub>3</sub> nano-particles additives with MD techniques.
Inorganic nano-particles can both prevent PEO from crystallisation ("nano-plasticising"), but also modify the local structure and dynamics of the surrounding polymer and the solvated ions. Our group has investigated a number of PEO systems with Al<sub>2</sub>O<sub>3</sub> nano-particles additives with MD techniques.


==Contact==
==People==
[[User:Alvo|Alvo Aabloo]]
[[User:Alvo|Alvo Aabloo]]
[[User:Heiki|Heiki Kasemagi]]
[[User:Anti|Anti Liivat]]
[[User:Daniel|Daniel Brandell]]
[[User:Jaanuska|Jaanus Karo]]
The work is done in close collaboration with [http://www.mkem.uu.se/Forskning/Struktur/Angstom_Adv_Battery/polymer_simulations/index.shtm Department of Materials Chemistry in Uppsala University]
==[[Our_publications#Polymer_electrolytes|Publications]]==

Latest revision as of 06:45, 25 August 2007

Introduction

Solid electrolytes for the Lithium-Ion Polymer Battery can be produced by mixing a lithium salt, typically LiPF6 or LiBF4, into poly(ethylene oxide) (PEO), -(CH2CH2O)n-. However, such electrolytes only exhibit adequate ionic conductivity (>10-4 S/cm) at temperatures above 70°C, where the polymer becomes amorphous. The conventional wisdom has been that the high degree of local order (“crystallinity”) is the reason for the poor ionic conductivity at ambient temperatures. Much attention has therefore been devoted to the task of increasing the amorphous content of the PEO electrolyte at ambient temperatures.

PEO small.png

Methodology - Molecular Dynamics simulations

In a Molecular Dynamics (MD) simulation, atomic motion is described in classical mechanics terms by solving Newton’s equations of motion for each atom in a fixed simulation box. This procedure generates a sequence of snapshots which together constitutes a “movie” of the simulated system on the atomic scale. The massive computer time needed to solve these equation for a large number of particles means that such movies are generally fairly short – within the nanosecond regime for some thousands of atoms. All that is needed to solve the equations of motion are the masses of the particles and the potentials describing the interactions between them - the so-called Force Field. This is normally generated by quantum mechanics calculations.

Crystalline polymer electrolytes

LiPF6PEO6 small.png

Crystalline phases of polymer electrolytes were long regarded as insulators. This view has been overturned to some extent during recent years by the demonstration of ionic conductivity in the complexes LiXF6PEO6 for X = P, As or Sb. Although the conductivity is still relatively low in these materials, they nevertheless show ca. ten times higher ionic conductivity than their amorphous counterparts. The LiXF6PEO6 complexes also display very fascinating structures – the materials are composed of coaxial hemi-helices of PEO, which pairwise form cylindrical channels containing the lithium ions coordinated to ether-oxygen chains; the anions lie outside the hemi-helical pairs, with no directstructural interaction with the lithium ions (see Fig. 1). Within our group, we have made the first MD survey of this LiPF6PEO6 system to try to find the source of this unorthodox behaviour.

The effect of side-chains

The addition of side-chains to the polymer backbone prevents PEO from crystallising, but also changes the local mobility in the surroundings. We find that side-chains can act as "paddle-wheels" or "rotors", thereby facilitating Li-ion motion. Within our group, we use MD simulations to study these phenomena on the atomic and molecular scale. We have varied side-chain length and separation for a number of PEO-based system using different salt concentrations.

Nano-particles in polymer electrolytes

Nanoparticle small.png

Inorganic nano-particles can both prevent PEO from crystallisation ("nano-plasticising"), but also modify the local structure and dynamics of the surrounding polymer and the solvated ions. Our group has investigated a number of PEO systems with Al2O3 nano-particles additives with MD techniques.

People

Alvo Aabloo

Heiki Kasemagi

Anti Liivat

Daniel Brandell

Jaanus Karo

The work is done in close collaboration with Department of Materials Chemistry in Uppsala University

Publications