Materials: Difference between revisions

From Intelligent Materials and Systems Lab

No edit summary
No edit summary
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Our vision, goal and what we do ==
==Goal and motivation of IMS-Materials==


Siia tuleb sissejuhatav tekst ja sellele järgneb alajaotus teemade kaupa
Increasing requirements to the properties of new materials challenge to develop novel materials and find new approaches for their fabrication. IMS-Materials is focused on development of materials and in addition to academic [[#Basic research|basic research]], in collaboration with industry, [[#Applied & contract research|applied and contract research]] is carried out.


* Electroactive polymers (Tarmo, Urmas)
==Highlights==
* Ionic liquids (Kaija)
* Microfabrication (Anna-Liisa)
* Energy harvest and flow capacitors (Janno)
* Indrek?


== Tools we use ==
* [https://forte.delfi.ee/news/teadus/tartu-teadlased-valmistasid-koos-prantslastega-imeohukese-kuid-voimeka-tehislihase?id=80499456 Tartu teadlased valmistasid koos prantslastega imeõhukese, kuid võimeka tehislihase]
 
==Capabilities==
All steps from materials development to device design and fabrication are covered
 
===Equipment===


All steps from materials development to device design and fabrication are covered:
* potentiostats/galvanostats/frequenzy analyzers
* potentiostats/galvanostats/frequenzy analyzers
* SEM equipped with EDX
* SEM equipped with EDX
* FT-IR spectrometer
* FT-IR spectrometer
* KF titrator
* KF titrator
* dynamic mechanical analysis tool
* chemistry lab equipped for organic synthesis
* chemistry lab equipped for organic synthesis
* glove box
* glove box
* .....
* planetary ball mill
<!-- This is end of section -->
* spin-coater
 
* R&D micro-printing system
== Research Projects ==
* hot-rolling press
 
=== Ongoing Activities ===
Igaüks, kellel on projekt, võiks hoolitseda selle eest, et see siin kajastuks
 
==== Basic Research ====
* [[IUT 2024 - Stimuli-Responsive Smart Polymer Composite Materials and their Applications in Lab-on chip Devices and in Robotics]]


==== Applied & Contract Research ====
===Skills===
* [[LLTTI17205 - Non-combustible mouldable silicone foams for public transportation seat upholstery ]]
* [[LLTTI17114 - "Development of reinforced porous concrete" ]]


=== Past projects ===
* Electroactive polymers
 
* [[Ionic Liquids|Ionic liquids]]
==== Basic research ====
* Microfabrication
* [[MOBTP 10 - Developmnt of biocompatible ionic electromechanically active polymer actuator (01.01.2017 - 31.12.2017)]]
* Energy harvest and flow capacitors
* [[ETF9236 - "Development and characterization of conducting polymer based composite materials for electromechanical applications"]] (1.01.2012−31.12.2015)
* [[Soft Robotics|Electroactive materials for soft robotics]]
* [[ETF7533 - "Design of conducting polymers of specific properties for promising applications" ]] (1.01.2008−31.12.2011)
* [[ETF5830 - "Modeling of the specific properties of concuting polymers of technological interest"]] (1.01.2004−31.12.2007)"
 
==== Applied & Contract Research ====
* [["Soft materials for miniaturizable wearable sensory and feedback application in sports and rehabilitation ]] (01.09.2012 - 30.06.2015)
* [["Toodetavate kinga- ja saapapaelte kvaliteedi parendamisele suunatud järeltöötlemistehnoloogiate väljatöötamine"]] (1.03.2012−30.10.2014)
* [["Scannersock]] (15.01.2016−30.04.2016)
* [["Analysis of corroding ship tubing"]](4.04.2016−31.05.2016)
* ....
 
=== Student projects  ===
* [[Ioonsed vedelikud elektroatiivsete polümeeride jaoks]]
* [[Bioühilduvad elektroaktiivsed polümeerid]]
* ....
<!-- This is end of section -->


== Members ==
== Members ==
Line 58: Line 36:
{{Team|
{{Team|
{{TeamMember|Tarmo|Tarmo Tamm|senior research fellow (materials chemistry, polymeric materials)}}
{{TeamMember|Tarmo|Tarmo Tamm|senior research fellow (materials chemistry, polymeric materials)}}
{{TeamMember|Urmas|Urmas Johanson}}
{{TeamMember|Urmas|Urmas Johanson|researcher (electrochemistry)}}
{{TeamMember|Gajanee|Kaija Põhako-Esko}}
{{TeamMember|Gajanee|Kaija Põhako-Esko|researcher, Marie Skłodowska-Curie fellow (chemistry, organic synthesis, ionic liquids)}}
{{TeamMember|Annaliisa|Anna-Liisa Peikolainen}}
{{TeamMember|Annaliisa|Anna-Liisa Peikolainen|researcher (carbon materials, chemistry, microfabrication)}}
{{TeamMember|Janno|Janno Torop}}
{{TeamMember|Janno|Janno Torop|researcher (flow cell supercaps, carbon materials)}}
{{TeamMember|Indrekm|Indrek Must}}
{{TeamMember|Indrekm|Indrek Must|associate professor}}
}}
}}


PhD students (igaüks hoolitseb, et tema omad kirjas oleks)
==Student projects==
* Fred Elhi
* Pille Rinne
* Karl Karu
* Kadi-Anne Küppar
* Kaur Leemets
* Alo Kivilo
* Hans Priks


Friends and collaborators
[[Student projects in Materials|List of currently active and timely projects are here]]
<!-- This is end of section -->
<!-- This is end of section -->


==Publications==
==Portfolio==
<!-- This is end of section -->
 
===Selected projects===
<!-- Igaüks, kellel on käimasolev projekt, võiks hoolitseda selle eest, et see siin kajastuks -->


==Defended theses==
==== Basic research ====


=== PhD Theses ===
* [[IUT 2024 - Stimuli-Responsive Smart Polymer Composite Materials and their Applications in Lab-on chip Devices and in Robotics]]-ongoing
* Rauno Temmer - "Electrochemistry and nolvel applications of chemically synthesized conductive polymer electrodes" 2014
* PUT1696 - 3D printed Na-ion polymer microbatteries with carbon xerogel electrodes - ongoing
* [[MOBTP 10 - Developmnt of biocompatible ionic electromechanically active polymer actuator (01.01.2017 - 31.12.2017)]]
* [[ETF9236 - "Development and characterization of conducting polymer based composite materials for electromechanical applications"]] (1.01.2012−31.12.2015)
* [[ETF7533 - "Design of conducting polymers of specific properties for promising applications" ]] (1.01.2008−31.12.2011)
* [[ETF5830 - "Modeling of the specific properties of concuting polymers of technological interest"]] (1.01.2004−31.12.2007)


=== Master's Theses ===
==== Applied & contract research ====
* Kadi-Anne Küppar - "Preparation and characterization of biopolymer membranes for electroactive polymers" 2017
* Sagar Ramanbhai Patel - "Development of foreign body detection methodology in industrial food preparation process" 2016
* Paul Jaakson - "Encapsulation of ionic electroactive polymer-composites" 2016
* Hans Priks - "Polypyrrole as a microbial fuel cells electrode material" 2016
* Kätlin Rohtlaid - "Ion mobility in polypyrrole actuators" 2015


* [[LLTTI17205 - Non-combustible mouldable silicone foams for public transportation seat upholstery ]]-ongoing
* [[LLTTI17114 - "Development of reinforced porous concrete" ]]-ongoing
* [["Soft materials for miniaturizable wearable sensory and feedback application in sports and rehabilitation ]] (01.09.2012 - 30.06.2015)
* [["Toodetavate kinga- ja saapapaelte kvaliteedi parendamisele suunatud järeltöötlemistehnoloogiate väljatöötamine"]] (1.03.2012−30.10.2014)
* [["Scannersock]] (15.01.2016−30.04.2016)
* [["Analysis of corroding ship tubing"]](4.04.2016−31.05.2016)


=== Bachelor's theses ===
===Selected publications===
* Markus Otsus - "Relations Between the Structure and Compressive Strength of Autoclaved Aerated Concrete" 2017


<!-- This is end of section -->
* Põldsalu, I., Rohtlaid, K., Nguyen, T.M.G., Plesse, C., Vidal, F., Khorram, M.S., Peikolainen, A.-L., Tamm, T., Kiefer, R. [http://doi.org/10.1016/j.snb.2017.11.147 <nowiki>Thin ink-jet printed trilayer actuators composed of PEDOT:PSS on interpenetrating polymer networks</nowiki>], Sensors and Actuators, B: Chemical, 2018.
* Kisand, K., Sarapuu, A., Peikolainen, A.-L., Seemen, H., Kook, M., Käärik, M., Leis, J., Sammelselg, V., Tammeveski, K. [http://doi.org/10.1002/celc.201800353 <nowiki>Oxygen Reduction on Fe- and Co-Containing Nitrogen-Doped Nanocarbons</nowiki>], ChemElectroChem, 2018.
<!-- Feel free to add your favourite ones  -->


[[Category:IMS-materials]]
[[Category:IMS-materials]]

Latest revision as of 20:22, 11 September 2019

Goal and motivation of IMS-Materials

Increasing requirements to the properties of new materials challenge to develop novel materials and find new approaches for their fabrication. IMS-Materials is focused on development of materials and in addition to academic basic research, in collaboration with industry, applied and contract research is carried out.

Highlights

Capabilities

All steps from materials development to device design and fabrication are covered

Equipment

  • potentiostats/galvanostats/frequenzy analyzers
  • SEM equipped with EDX
  • FT-IR spectrometer
  • KF titrator
  • dynamic mechanical analysis tool
  • chemistry lab equipped for organic synthesis
  • glove box
  • planetary ball mill
  • spin-coater
  • R&D micro-printing system
  • hot-rolling press

Skills

Members

Tarmo Tammsenior research fellow (materials chemistry, polymeric materials)
Urmas Johansonresearcher (electrochemistry)
Kaija Põhako-Eskoresearcher, Marie Skłodowska-Curie fellow (chemistry, organic synthesis, ionic liquids)
Anna-Liisa Peikolainenresearcher (carbon materials, chemistry, microfabrication)
Janno Toropresearcher (flow cell supercaps, carbon materials)
Indrek Mustassociate professor

Student projects

List of currently active and timely projects are here

Portfolio

Selected projects

Basic research

Applied & contract research

Selected publications