Intelligent Materials and Systems Lab - User contributions [en]

Potentiostat booking (BP-300-281)

2022-05-06T12:37:10Z

Saoni: /* Booking list */

=='''Booking list'''==

'''NB! Newer bookings on top!''' 

{| class="wikitable"
!colspan="6"|Booking list
|-
|Oleksander (1nd channel)
|07.05.2022
|10:00-14:00
|-
|Silvia (2nd channel)
|08.05.2022
|9:00-21:00
|-
|Hana (1st channel)
|05.05 -08.05.2022
| if you need to use it during this period for a short time, call +372 56570005
|18:00 (05.05.22) - 18:00 (08.05.22)
|-
|Oleksander (1nd channel)
|05.05.2022
|13:00-16:00
|-
|Silvia (2nd channel)
|06.05.2022
|10:00-18:00
|-
|Yauheni (2nd channel)
|05.05.2022
|12:00-24:00
|-
|Silvia (2nd channel)
|04.05.2022
|10:00-21:00
|-
|Hana (1st channel)
|06.04-08.04.2022
|-
|Hana (1st channel)
|07.03-08.03
|-
|Kadri-Ann and Hana
|24.11.2021
|10:00-17:00
|-
|Mona (2nd channel)
|05.10.2021
|12:00-17:00
|-
|Mark Merzlikin (1st channel in use)
|16.03.2021
|13:00-14:30
|-
|Mark Merzlikin (1st channel in use)
|27.01.2021
|14:00-16:30
|-
|Mark Merzlikin (1st channel in use)
|25.01.2021
|13:00-16:00
|-
|Ali, Alexandra (1st channel in use)
|8.01.2021
|17:00-21:00
|-
|Ausra, Ali, Alexandra (1st channel in use)
|22.12.2020
|13:00-20:00
|-
|Indrek (2nd channel in use)
|15.12.2020
|16:00-18:00
|-
|Ausra Baradoke (1st channel in use)
|15.12.2020
|14:00-15:00
|-
|Mark Merzlikin (1st channel in use)
|27.11.2020
|14:00-20:00
|-
|Mark Merzlikin (1st channel in use)
|26.11.2020
|19:30-21:00
|-
|Mark Merzlikin (1st channel in use)
|23.11.2020
|16:30-20:00
|-
|Mark Merzlikin (1st channel in use)
|20.11.2020
|14:00-17:00
|-
|Mark Merzlikin (1st channel in use)
|18.11.2020
|16:00-24:00
|-
|Mark Merzlikin (1st channel in use)
|17.11.2020
|16:00-24:00
|-
|Ausra Baradoke & Mark Merzlikin (1st channel in use)
|12.11.2020
|16:00-24:00
|-
|Ausra Baradoke (1st channel in use)
|12.11.2020
|8:00-12:00
|-
|Ausra Baradoke (1st channel in use)
|11.11.2020
|00:00-10:00
|-
|Ausra Baradoke (1st channel in use)
|10.11.2020
|17:00-24:00
|-
|Ausra Baradoke & Mark Merzlikin (1st channel in use)
|9.11.2020
|15:30-20:00
|-
|Ausra Baradoke (2nd channel in use)
|2.11.2020
|14:00-24:00
|-
|Indrek (2nd channel)
|30.10.2020
|16:00-19:00
|-
|Ausra Baradoke (1st channel in use)
|29.10.2020
|11:00-16:00
|-
|Janno Torop (1st channel in use)
|29.10.2020
|10:00-11:00
|-
|Ausra Baradoke (1st and 2nd channel in use)
|28.10.2020
|15:00-20:00
|-
|Ausra Baradoke (1st and 2nd channel in use)
|27.10.2020
|12:00-20:00
|-
|Mark Merzlikin (1st channel in use)
|26.10.2020
|13:00-14:00
|-
|Yauheni Sarokin(2nd channel in use)
|26.10.2020
|10:00-24:00
|-
|Yauheni Sarokin(2nd channel in use)
|24.10.2020
|17:00-24:00
|-
|Ausra Baradoke(1st and 2nd channel in use)
|22.10.2020
|13:00-20:00
|-
|Mona (2nd channel)
|21.-22.10.2020
|18:00-12:00
|-
|Ausra Baradoke(1st and 2nd channel in use)
|21.10.2020
|13:00-17:00
|-
|Mona (2nd channel)
|21.10.2020
|10:00-13:00
|-
|Indrek (2nd channel)
|20.-21.10.2020
|17:00-10:00
|-
|Mark Merzlikin (1st channel)
|20.10.2020
|14:10-17:00
|-
|Mark Merzlikin (1st channel)
|19.10.2020
|12:45-14.00
|-
|Mark Merzlikin (1st channel)
|15.10.2020
|12:00-19:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|13.10.2020
|15:00-24:00
|-
|Mark Merzlikin
|13.10.2020
|14:30-19:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|12.10.2020
|11:00-24:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|11.10.2020
|16:00-24:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|10.10.2020
|16:00-24:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|9.10.2020
|16:00-24:00
|-
|Mark Merzlikin (1st channel)
|9.10.2020
|14:00-15:00
|-
|Ausra Baradoke
|8.10.2020
|10:00-18:00
|-
|Mark Merzlikin
|8.10.2020
|10:00-13:00
|-
|Ausra Baradoke(I am using the 2nd channel only, please do not disconnect)
|7.10.2020
|13:00-24:00
|-
|Mark Merzlikin
|7.10.2020
|10:00-12:00
|-
|Mark Merzlikin
|6.10.2020
|14:00-18:00
|-
|Ausra Baradoke (I am using the 2nd channel only, please do not disconnect)
|6.10.2020
|14:00-20:00
|-
|Yauheni (I am using the 2nd channel only, please do not disconnect)
|6.10.2020
|13:00-14:00
|-
|Ausra Baradoke (I am using the 2nd channel only, please do not disconnect)
|6.10.2020
|7:00-13:00
|-
|Ausra Baradoke
|5.10.2020
|16:00-24:00
|-
|Ausra Baradoke
|4.10.2020
|11:00-16:00
|-
|Ausra Baradoke
|2.10.2020
|14:00-22:00
|-

User:Saoni

2021-09-19T14:33:33Z

Saoni:

{{UserProfile |
fullname=Saoni Banerji |
picture= SBM.jpg|thumb|
email=saoni.banerji@ut.ee |
skype=sb.upc |
researcherid=X-5452-2019 |
orcid=0000-0001-8221-9820 |
gscholar=https://scholar.google.es/citations?user=CBt92d8AAAAJ&hl=en |
etis=https://www.etis.ee/CV/Saoni_Banerji |
other=
{{UserProfileItem | LinkedIn | [https://www.linkedin.com/in/saonibanerji Saoni Banerji] }}

{{UserProfileItem | Position | Research Fellow (Microfabrication) }}

{{UserProfileItem | Research Group | {{ResearchGroupCard | name=Mixed Signal Microelectronics | link=Mixed Signal Microelectronics}} }}

== Theses topics for students ==
* [[Theses in Mixed Signal Microelectronics|Possible topics for BSc and MSc level students]]
}}

== Publications ==

=== Journal Articles ===

* Iman Dadras, Sofiane Ghenna, Sebastien Grondel, Eric Cattan, Jaan Raik, Alvo Aabloo, Saoni Banerji (2021) [https://doi.org/10.1109/JMEMS.2021.3060897 <nowiki>Modeling and Experimental Analysis of the Mass Loading Effect on Micro-Ionic Polymer Actuators Using Step Response Identification</nowiki>], ''Journal of Microelectromechanical Systems''. [https://doi.org/10.1109/JMEMS.2021.3060897 https://doi.org/10.1109/JMEMS.2021.3060897]
* Diana Mata-Hernandez, Daniel Fernández, Saoni Banerji, Jordi Madrenas (2020) [https://doi.org/10.3390/s20216037 <nowiki>Resonant MEMS Pressure Sensor in 180 nm CMOS Technology Obtained by BEOL Isotropic Etching</nowiki>], ''Sensors''. [https://doi.org/10.3390/s20216037 https://doi.org/10.3390/s20216037]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2018) [https://doi.org/10.1109/jsen.2018.2797526 <nowiki>A Comprehensive High-Level Model for CMOS-MEMS Resonators</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2018.2797526 https://doi.org/10.1109/jsen.2018.2797526]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2017) [https://doi.org/10.1109/jsen.2017.2747140 <nowiki>Characterization of CMOS-MEMS Resonant Pressure Sensors</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2017.2747140 https://doi.org/10.1109/jsen.2017.2747140]
* Saoni Banerji, Piotr Michalik, Daniel Fernández, Jordi Madrenas, Albert Mola, Josep Montanyà (2017) [https://doi.org/10.1007/s00542-016-2878-3 <nowiki>CMOS-MEMS resonant pressure sensors: optimization and validation through comparative analysis</nowiki>], ''Microsystem Technologies''. [https://doi.org/10.1007/s00542-016-2878-3 https://doi.org/10.1007/s00542-016-2878-3]
* Saoni Banerji, R.Senthil Kumar (2010) Diagnosis of Systems Via Wavelet Transform Analysis based on Time Frequency Representations , ''Int. J. of Recent Trends in Engineering and Technology''.

=== Conference Papers ===

* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2016) [https://doi.org/10.1109/icsens.2016.7808403 <nowiki>Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator</nowiki>], ''2016 Ieee Sensors''. [https://doi.org/10.1109/icsens.2016.7808403 https://doi.org/10.1109/icsens.2016.7808403]
* Banerji, Saoni & Chiva, Josep (2016) [http://hdl.handle.net/2117/84731 <nowiki>Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform</nowiki>], ''JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts''.
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2015) [https://doi.org/10.1109/dtip.2015.7160984 <nowiki>Optimization of parameters for CMOS MEMS resonant pressure sensors</nowiki>], ''2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)''. [https://doi.org/10.1109/dtip.2015.7160984 https://doi.org/10.1109/dtip.2015.7160984]
* Saoni Banerji, Wang Ling Goh, Jia Hao Cheong, Minkyu Je (2013) [https://doi.org/10.1109/imws-bio.2013.6756176 <nowiki>CMUT ultrasonic power link front-end for wireless power transfer deep in body</nowiki>], ''2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO)''. [https://doi.org/10.1109/imws-bio.2013.6756176 https://doi.org/10.1109/imws-bio.2013.6756176]
* S Banerji, S Kumar (2011) Face Recognition Using K2DSPCA, ''International Conference on Information and Network Technology''.

=== Other ===

* Banerji, Saoni and Ling, Goh Wang and Cheong, Jia Hao and Je, Minkyu (2012) [https://repository.ntu.edu.sg/handle/10356/59966 <nowiki>Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>].

== PhD thesis ==
*Banerji,S (2018), [https://dialnet.unirioja.es/servlet/tesis?codigo=258747<nowiki> Development of System-on-Chip CMOS-MEMS Pressure Sensors, 2018</nowiki>], Universitat Politècnica de Catalunya
== MSc thesis ==
*Banerji,S (2012), [https://repository.ntu.edu.sg/handle/10356/59966<nowiki> Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>], Nanyang Technological University

[[Category:PI]]

User:Saoni

2021-01-18T20:01:46Z

Saoni:

{{UserProfile |
fullname=Saoni Banerji |
picture= SBM.jpg|thumb|
mobile=+372 5784-7716 |
email=saoni.banerji@ut.ee |
skype=sb.upc |
researcherid=X-5452-2019 |
orcid=0000-0001-8221-9820 |
gscholar=https://scholar.google.es/citations?user=CBt92d8AAAAJ&hl=en |
etis=https://www.etis.ee/CV/Saoni_Banerji |
other=
{{UserProfileItem | LinkedIn | [https://www.linkedin.com/in/saonibanerji Saoni Banerji] }}

{{UserProfileItem | Position | Research Fellow (Microfabrication) }}

{{UserProfileItem | Research Group | {{ResearchGroupCard | name=Mixed Signal Microelectronics | link=Mixed Signal Microelectronics}} }}

== Theses topics for students ==
* [[Theses in Mixed Signal Microelectronics|Possible topics for BSc and MSc level students]]
}}

== Publications ==

=== Journal Articles ===

* Diana Mata-Hernandez, Daniel Fernández, Saoni Banerji, Jordi Madrenas (2020) [https://doi.org/10.3390/s20216037 <nowiki>Resonant MEMS Pressure Sensor in 180 nm CMOS Technology Obtained by BEOL Isotropic Etching</nowiki>], ''Sensors''. [https://doi.org/10.3390/s20216037 https://doi.org/10.3390/s20216037]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2018) [https://doi.org/10.1109/jsen.2018.2797526 <nowiki>A Comprehensive High-Level Model for CMOS-MEMS Resonators</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2018.2797526 https://doi.org/10.1109/jsen.2018.2797526]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2017) [https://doi.org/10.1109/jsen.2017.2747140 <nowiki>Characterization of CMOS-MEMS Resonant Pressure Sensors</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2017.2747140 https://doi.org/10.1109/jsen.2017.2747140]
* Saoni Banerji, Piotr Michalik, Daniel Fernández, Jordi Madrenas, Albert Mola, Josep Montanyà (2017) [https://doi.org/10.1007/s00542-016-2878-3 <nowiki>CMOS-MEMS resonant pressure sensors: optimization and validation through comparative analysis</nowiki>], ''Microsystem Technologies''. [https://doi.org/10.1007/s00542-016-2878-3 https://doi.org/10.1007/s00542-016-2878-3]
* Saoni Banerji, R.Senthil Kumar (2010) Diagnosis of Systems Via Wavelet Transform Analysis based on Time Frequency Representations , ''Int. J. of Recent Trends in Engineering and Technology''.

=== Conference Papers ===

* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2016) [https://doi.org/10.1109/icsens.2016.7808403 <nowiki>Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator</nowiki>], ''2016 Ieee Sensors''. [https://doi.org/10.1109/icsens.2016.7808403 https://doi.org/10.1109/icsens.2016.7808403]
* Banerji, Saoni & Chiva, Josep (2016) [http://hdl.handle.net/2117/84731 <nowiki>Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform</nowiki>], ''JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts''.
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2015) [https://doi.org/10.1109/dtip.2015.7160984 <nowiki>Optimization of parameters for CMOS MEMS resonant pressure sensors</nowiki>], ''2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)''. [https://doi.org/10.1109/dtip.2015.7160984 https://doi.org/10.1109/dtip.2015.7160984]
* Saoni Banerji, Wang Ling Goh, Jia Hao Cheong, Minkyu Je (2013) [https://doi.org/10.1109/imws-bio.2013.6756176 <nowiki>CMUT ultrasonic power link front-end for wireless power transfer deep in body</nowiki>], ''2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO)''. [https://doi.org/10.1109/imws-bio.2013.6756176 https://doi.org/10.1109/imws-bio.2013.6756176]
* S Banerji, S Kumar (2011) Face Recognition Using K2DSPCA, ''International Conference on Information and Network Technology''.

=== Other ===

* Banerji, Saoni and Ling, Goh Wang and Cheong, Jia Hao and Je, Minkyu (2012) [https://repository.ntu.edu.sg/handle/10356/59966 <nowiki>Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>].

== PhD thesis ==
*Banerji,S (2018), [https://dialnet.unirioja.es/servlet/tesis?codigo=258747<nowiki> Development of System-on-Chip CMOS-MEMS Pressure Sensors, 2018</nowiki>], Universitat Politècnica de Catalunya
== MSc thesis ==
*Banerji,S (2012), [https://repository.ntu.edu.sg/handle/10356/59966<nowiki> Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>], Nanyang Technological University

[[Category:PI]]

File:SBM.jpg

2021-01-18T19:59:21Z

Saoni:

Photo

People

2020-12-17T11:44:24Z

Saoni:

{{DISPLAYTITLE:The Lab's Team}} __NOTOC__
== Staff ==

{{Team|
{{TeamMember|Alvo|Alvo Aabloo|professor, head of the lab (polymer materials)}}
{{TeamMember|Karl|Karl Kruusamäe|associate professor of robotics engineering, [[IMS robotics]]}}
{{TeamMember|Indrekm|Indrek Must|associate professor of soft robotics}}
{{TeamMember|Aks1812|Arun Kumar Singh|associate professor of collaborative robotics, [[IMS robotics]]}}
{{TeamMember|Tarmo|Tarmo Tamm|senior researcher of materials science}}
{{TeamMember|Vahur|Vahur Zadin|senior researcher (finite element modelling, molecular dynamics, high electric fields, CERN)}}
{{TeamMember|Heiki|Heiki Kasemägi|senior researcher (ion-conducting polymer, computer simulations) & Computer engineering study programme manager}}
{{TeamMember|Gajanee|Kaija Põhako-Esko|researcher, Marie Skłodowska-Curie fellow (chemistry, organic synthesis, ionic liquids)}}
{{TeamMember|Urmas|Urmas Johanson|researcher (electrochemistry)}}
{{TeamMember|Annaliisa|Anna-Liisa Peikolainen|researcher (carbon materials, chemistry)}}
{{TeamMember|Janno|Janno Torop|researcher (flow cell supercaps, carbon materials)}}
{{TeamMember|Saoni|Saoni Banerji| research fellow (CMOS MEMS sensors, mixed-signal ASIC design, microelectronics)}}
{{TeamMember|Morteza.Daneshmand|Morteza Daneshmand|research fellow (human-robot collaboration in manufacturing), [[IMS robotics]]}}
{{TeamMember|Veix|Veiko Vunder|lecturer (robotics)}}
{{TeamMember|Artur|Artur Abels|teaching assistant (digital electronics)}}
{{TeamMember|Rennoraudmae|Renno Raudmäe|teaching assistant}}
{{TeamMember|Sandra|Sandra Schumann|robotics education}}
{{TeamMember|Roman|Roman Leinus|engineer (robotics)}}
{{TeamMember|Teet|Teet Tilk|engineer (electronics)}}
{{TeamMember|Tauri|Tauri Tätte|engineer (robotics)}}
{{TeamMember|Kadri.tonnisson|Kadri Tõnnisson|project coordinator}}
{{TeamMember|Kristel.leif|Kristel Leif|Communication coordinator}}
{{TeamMember|Marina|Marina Roosimäe|project manager}}
{{TeamMember|Eva.m6tsh2rg|Eva Mõtshärg|student (robotics education)}}

}}

== PhD Students ==

{{Team|
{{TeamMember|Arko|Arko Kesküla|PhD student (ionic liquid polymerization); supervisors: A.-L. Peikolainen, U. Mäeorg}}
{{TeamMember|kaur|Kaur Leemets|PhD student (printable sensors)}}
{{TeamMember|Zane|Zane Zondaka|PhD student (Conductive polymers carbon composites)}}
{{TeamMember|Robertvalner|Robert Valner|PhD student (robotics, [[IMS robotics]])}}
{{TeamMember|faiza|Faiza Summer|PhD student (Flow-capacitor)}}
{{TeamMember|Pille|Pille Rinne|PhD student}}
{{TeamMember|madis.harjo|Madis Harjo|PhD student (nanocarbon composites)}}
{{TeamMember|Fred|Fred Elhi|PhD student (microfabrication, EAP)}}
{{TeamMember|hans_priks|Hans Priks|PhD student (conducting polymers)}}
{{TeamMember|Kristiankuppart|Kristian Kuppart|PhD student (MD in high electric fields)}}
{{TeamMember|karlkaru|Karl Karu|PhD student}}
{{TeamMember|Helena.nulk|Helena Nulk|PhD student (collaborative robotics, [[IMS robotics]])}}
{{TeamMember|Ingridre|Ingrid Rebane|PhD student (PDMS foams)}}
{{TeamMember|ye.wang|Ye Wang|PhD student (Design and development of tailored nanostructures)}}
{{TeamMember|Iman.dadras|Iman Dadras|PhD student (Microfabrication)}}
{{TeamMember|Fatemeh.rastgar|Fatemeh Rastgar|PhD student (Robotics)}}
{{TeamMember|yauheni|Yauheni Sarokin|PhD student (Variable stiffness textiles)}}
{{TeamMember|Houman.masnavi|Houman Masnavi|PhD student (deep-learning-based motion-planning in robotics)}}
{{TeamMember|Oleksandr.syzoniuk|Oleksandr Syzoniuk|PhD student (soft robotics)}}

}}

==Students==

{{Team|
{{TeamMember|markus|Markus Loide|student}}
{{TeamMember|Liivak|Martin Liivak|student (FEM simulations of 3D-MB's)}}
{{TeamMember|Priit.poldmaa|Priit Põldmaa|student}}
{{TeamMember|raunoumborg|Rauno Umborg|student (computer engineering)}}
{{TeamMember|Kaarelsiimut|Kaarel Siimut|student (aerated concrete)}}
{{TeamMember|Ingmar.laan|Ingmar Laan|student (ionic polymer actuators)}}
{{TeamMember|Johannes.muru|Johannes Muru|student}}
{{TeamMember|Hermanratas|Herman Klas Ratas|student}}
{{TeamMember|Kadriannvaldur|Kadri-Ann Valdur|student (PPy actuators)}}
{{TeamMember|Ats.aasmaa|Ats Aasmaa|student (modelling of microbatteries)}}
{{TeamMember|Gryogor|Igor Rybalskii|student (robotics)}}
{{TeamMember|Phuong.nguyen|Phuong Nguyen|student (FEM simulations)}}
{{TeamMember|Magnus.kaldjarv|Magnus Kaldjärv|student (soft robotics)}}
{{TeamMember|Mkuuts|Mona Küüts|student (soft robotics)}}
{{TeamMember|Silvia.aabloo|Silvia Hiie Aabloo|student (soft robotics)}}
{{TeamMember|Oleskhen|Hendrik Olesk|student (mobile manipulator robotics)}}
{{TeamMember|Tepandi|Tarvi Tepandi|student (AR in robotics)}}

}}

==Colleagues==

{{Team|
{{TeamMember|Rosin|Margus Rosin|lecturer (FPGA)}}
{{TeamMember|Frkaasik|Friedrich Kaasik|ex-PhD student (carbon-polymer actuators)}}
{{TeamMember|Heilo|Heilo Altin|educational robotics}}
{{TeamMember|Ramon.rantsus|Ramon Rantsus|educational robotics}}
{{TeamMember|Arturt|Artur Tamm| at LLNL [https://qsg.llnl.gov/node/89.html QSG LLNL]}}
{{TeamMember|Aleksander|Aleksander Tõnnisson|[http://buildit.ee Buildit] (Hardware accelerator) CEO}}
{{TeamMember|katlin.rohtlaid|Kätlin Rohtlaid}}
{{TeamMember|Grecebo|Inga Põldsalu|postdoc at University of Oslo, [https://www.med.uio.no/ncmm/english/people/aca/inga/index.html Bionanotechnology and Membrane Systems]}}
}}

Lab booking during COVID-19

2020-12-15T13:28:31Z

Saoni:

Starting from ''' 15th of December 2020 - 31st of December''', please mark into the table below when you need to carry out experimental work in the chemistry labs 324 (maximum 4 persons at a time) or 326 (Gray room, 2 persons at a time) to organize safe working in IMS Lab chemistry labs. Please mark your name to this table even if you have booked any instrument in other tables. Let's be considerate and I'm sure we shall manage.

Please follow these guidelines:
* Always keep the mask on in the labs (wear it properly and change it as required by the user manual!)
* Keep safe distance from your colleagues: at least 2 m
* If possible, book only half a day for your experiment. If the experiment lasts longer, mark the other half of the day as well but be willing to negotiate with fellow students about alternative time slots to enable everyone to have some access to the lab.
* You may add exact experiment time in the brackets after your name if you know that you will not use the entire time of your session.
* In the Gray room '''326, PLEASE DO NOT OPEN WINDOWS,''' but in 324 chemistry lab, if possible, please air the lab after your session by opening a window or two for 15 minutes.

'''Contact person''': '''Anna-Liisa Peikolainen.''' If you have questions or you need help in booking, please contact me via Slack.

''' Newer bookings on top'''

{| class="wikitable" style="text-align:center"
|-
!!!colspan="2"| Lab 324

4 persons at a time

!colspan="2"| Lab 326

2 persons at a time
|-
|'''Date'''||8:00-12:00||13:00-17:00||8:00-12:00||13:00-17:00
|-
|'''16.12.2020'''

|Person 1

Person 2

Person 3

Person 4

|Person 1

Person 2

Person 3

Person 4

|Person 1 - Siim Koor

Person 2

|Person 1- A.-L. Peikolainen

Person 2
|-
|'''15.12.2020'''

|Person 1 - A.-L. Peikolainen (9:30-12:00)

Person 2

Person 3

Person 4

|Person 1 - Ausra Baradoke [14:00-16:00]

Person 2 - Mona [16-18]

Person 3 - Indrek [16-18]

Person 4 - Saoni Banerji [16:00-18:00]

|Person 1

Person 2

|Person 1

Person 2
|-
|'''Date'''

|Person 1

Person 2

Person 3

Person 4

|Person 1

Person 2

Person 3

Person 4

|Person 1

Person 2

|Person 1

Person 2
|}

Lab booking during COVID-19

2020-12-15T09:39:34Z

Saoni:

Starting from ''' 15th of December 2020 - 31st of December''', please mark into the table below when you need to carry out experimental work in the chemistry labs 324 (maximum 4 persons at a time) or 326 (Gray room, 2 persons at a time) to organize safe working in IMS Lab chemistry labs. Please mark your name to this table even if you have booked any instrument in another tables. Let's be considerate and I'm sure we shall manage.

Please follow these guidelines:
* Always keep the mask on in the labs (wear it properly and change it as required by the user manual!)
* Keep safe distance from your colleagues: at least 2 m
* If possible, book only half a day for your experiment. If the experiment lasts longer, mark the other half of the day as well but be willing to negotiate with fellow students about alternative time slots to enable everyone to have some access to the lab.
* You may add exact experiment time in the brackets after your name if you know that you will not use the entire time of your session.
* In the Gray room '''326, PLEASE DO NOT OPEN WINDOWS,''' but in 324 chemistry lab, if possible, please air the lab after your session by opening a window or two for 15 minutes.

'''Contact person''': '''Anna-Liisa Peikolainen.''' If you have questions or you need help in booking, please contact me via Slack.

''' Newer bookings on top'''

{| class="wikitable" style="text-align:center"
|-
!!!colspan="2"| Lab 324

4 persons at a time

!colspan="2"| Lab 326

2 persons at a time
|-
|'''Date'''||8:00-12:00||13:00-17:00||8:00-12:00||13:00-17:00
|-
|'''15.12.2020'''

|Person 1 - A.-L. Peikolainen (9:30-12:00)

Person 2

Person 3

Person 4

|Person 1 - Ausra Baradoke [14:00-16:00]

Person 2 - Mona [16-18]

Person 3 - Indrek [16-18]

Person 4 - Saoni Banerji [15:00-17:00]

|Person 1

Person 2

|Person 1

Person 2
|-
|'''Date'''|

|Person 1

Person 2

Person 3

Person 4

|Person 1

Person 2

Person 3

Person 4

|Person 1

Person 2

|Person 1

Person 2
|}

Mixed Signal Microelectronics

2020-10-26T16:29:51Z

Saoni:

[[File:Logo.png|600px|center]]
==Why CMOS-MEMS?==
*Reduced Parasitic degradation
*Mainstream processes:High volume production
*Most scalable and monolithic
*Targeted for consumer electronics (primarily)
*Less degrees of freedom (Not the best solution!)

==Our Vision ==
We strive to adapt and develop smart ways for our MEMS materials in standard CMOS technology for optimized ASIC design targeted for biomedical and consumer applications.

==Capabilities==
=== Methodology ===
Typically, we follow the standard procedure to develop our devices:
*Device design, Modeling and Optimization
*Black-box modeling and co-simulation with electronics (transistor-level design)
*Device Fabrication and Tape-out (corresponding to the technology node)
*Characterization (in terms of ambient and electrical factors) for optimal operation
*Convergence of modeling and experimental results for validation

<gallery caption="A Typical workflow for CMOS MEMS Pressure sensor" mode=packed heights=300px style="text-align:left">>
File:Pullin.png|300px|FEM of CMOS-MEMS resonator at Pull-in
File:Set-up.png|300px|Block diagram of experimental set-up for device characterization
File:Psensor.jpg|300px|View of Monolithic CMOS-MEMS Pressure sensor under scanning electron microscope
</gallery>

=== Tools we use ===
====Software====
*Modeling and Optimization: [https://se.mathworks.com/products/matlab.html MATLAB], [https://www.comsol.com COMSOL Multiphysics]
*Transistor level Design and Layout: [https://www.cadence.com Cadence]

==== Equipment ====
*SEM
*FIB
*Microprobe setup
*Impedance Analyzer

== Primary contacts ==

{{Team|
{{TeamMember|Saoni|Saoni Banerji| postdoc researcher of CMOS MEMS sensors}}
{{TeamMember|Alvo|Alvo Aabloo| professor, head of the IMS lab}}
}}
== Student projects ==
[[Theses in Mixed Signal Microelectronics|Possible topics for BSc and MSc level students]]
== Portfolio ==
===Research Topics===
Possible interesting topics are:
*MEMS-Based Sensors for Human Centered Applications (CMOS MEMS Based Micro Biotronics)
*Monolithic sensors in CMOS technologies (targeted towards consumer electronics)

=== Selected Publications ===

*S. Banerji, D. Fernández and J. Madrenas, (2018) {{doi-inline|https://doi.org/10.1109/JSEN.2018.2797526|A Comprehensive High-Level Model for CMOS-MEMS Resonators}},'' in IEEE Sensors Journal, vol. 18, no. 7, pp. 2632-2640, April 1, 2018''.
*S. Banerji, D. Fernández and J. Madrenas, (2017) {{doi-inline|https://doi.org/10.1109/JSEN.2017.2747140|Characterization of CMOS-MEMS Resonant Pressure Sensors}},'' in IEEE Sensors Journal, vol. 17, no. 20, pp. 6653-6661, Oct.15, 2017''.
*S. Banerji, P. Michalik, D. Fernández, J. Madrenas, A. Mola, J. Montanyà,(2017) {{doi-inline|https://doi.org/10.1007/s00542-016-2878-3|CMOS-MEMS resonant pressure sensors: Optimization and validation through comparative analysis}},'' , Microsyst. Technol., vol. 23, no. 9, pp. 3909-3925, 2016''.

Theses in Mixed Signal Microelectronics

2020-10-26T16:27:49Z

Saoni:

== Possible theses topics for 2020/2021 study year ==
# [[#Vision-based control of soft micro-robot based on polymeric actuators|Vision-based control of soft micro-robot based on polymeric actuators]]

=== Vision-based control of soft micro-robot based on polymeric actuators ===
By employing unconventional materials, soft robots exhibit higher bending and twisting capabilities in constrained environments compared to their conventional rigid-bodied counterparts. Ionic electroactive polymer-based actuators (IEAPs) are a class of actuation materials for soft robotics that have attracted global interest amongst scientists owing to their low density, biocompatibility, scalability, low and safe operating voltages (< 3V) and are believed to be utilized in potential biomedical applications. However, the force generated by such actuators limits their interaction with external devices and therefore their use as standalone systems. On the other hand, advancement in continuous miniaturization of electronics has led to development of lightweight, reduced cost, high performance, and reliable devices. In this context, by employing a tiny CMOS image sensor mimicking the robot eye, a vision-guided control of a robot based on IEAPs is proposed to be developed, for its use case in applications such as otoscopy. Knowledge and experience in image processing, control system theory, programming and electronics is beneficial.
<hr>



[[Category:Theses Topics]]

Theses in Mixed Signal Microelectronics

2020-10-26T16:09:36Z

Saoni: Created page with " == Highlighted theses topics for 2020/2021 study year == # #Vision-based control of soft micro-robot based on polymeric actuators|Vision-based control of soft micro-robot b..."

== Highlighted theses topics for 2020/2021 study year ==
# [[#Vision-based control of soft micro-robot based on polymeric actuators|Vision-based control of soft micro-robot based on polymeric actuators]]

=== Vision-based control of soft micro-robot based on polymeric actuators ===
By employing unconventional materials, soft robots exhibit higher bending and twisting capabilities in constrained environments compared to their conventional rigid-bodied counterparts. Ionic electroactive polymer-based actuators (IEAPs) are a class of actuation materials for soft robotics that have attracted global interest amongst scientists owing to their low density, biocompatibility, scalability, low and safe operating voltages (< 3V) and are believed to be utilized in potential biomedical applications. However, the force generated by such actuators limits their interaction with external devices and therefore their use as standalone systems. On the other hand, advancement in continuous miniaturization of electronics has led to development of lightweight, reduced cost, high performance, and reliable devices. In this context, by employing a tiny CMOS image sensor mimicking the robot eye, a vision-guided control of a robot based on IEAPs is proposed to be developed, for its use case in applications such as otoscopy. Knowledge and experience in image processing, control system theory, programming and electronics is beneficial.
<hr>



[[Category:Theses Topics]]

User:Saoni

2020-10-26T15:44:46Z

Saoni:

{{UserProfile |
fullname=Saoni Banerji |
picture= SaoniBanerji.jpg |
mobile=+372 5784-7716 |
email=saoni.banerji@ut.ee |
skype=sb.upc |
researcherid=X-5452-2019 |
orcid=0000-0001-8221-9820 |
gscholar=https://scholar.google.es/citations?user=CBt92d8AAAAJ&hl=en |
etis=https://www.etis.ee/CV/Saoni_Banerji |
other=
{{UserProfileItem | LinkedIn | [https://www.linkedin.com/in/saonibanerji Saoni Banerji] }}

{{UserProfileItem | Position | Research Fellow (Microfabrication) }}

{{UserProfileItem | Research Group | {{ResearchGroupCard | name=Mixed Signal Microelectronics | link=Mixed Signal Microelectronics}} }}

== Theses topics for students ==
* [[Theses in Mixed Signal Microelectronics|Possible topics for BSc and MSc level students]]
}}

== Publications ==
=== Journal Articles ===
* Mata-Hernandez, D.; Fernández, D.; Banerji, S.; Madrenas, J. (2020) [https://www.mdpi.com/1424-8220/20/21/6037 <nowiki>Resonant MEMS Pressure Sensor in 180 nm CMOS Technology Obtained by BEOL Isotropic Etching</nowiki>], ''Sensors 2020''. [https://www.mdpi.com/1424-8220/20/21/6037 https://www.mdpi.com/1424-8220/20/21/6037]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2018) [https://doi.org/10.1109/jsen.2018.2797526 <nowiki>A Comprehensive High-Level Model for CMOS-MEMS Resonators</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2018.2797526 https://doi.org/10.1109/jsen.2018.2797526]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2017) [https://doi.org/10.1109/jsen.2017.2747140 <nowiki>Characterization of CMOS-MEMS Resonant Pressure Sensors</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2017.2747140 https://doi.org/10.1109/jsen.2017.2747140]
* Saoni Banerji, Piotr Michalik, Daniel Fernández, Jordi Madrenas, Albert Mola, Josep Montanyà (2017) [https://doi.org/10.1007/s00542-016-2878-3 <nowiki>CMOS-MEMS resonant pressure sensors: optimization and validation through comparative analysis</nowiki>], ''Microsystem Technologies''. [https://doi.org/10.1007/s00542-016-2878-3 https://doi.org/10.1007/s00542-016-2878-3]
* Saoni Banerji, R.Senthil Kumar (2010) Diagnosis of Systems Via Wavelet Transform Analysis based on Time Frequency Representations , ''Int. J. of Recent Trends in Engineering and Technology''.

=== Conference Papers ===

* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2016) [https://doi.org/10.1109/icsens.2016.7808403 <nowiki>Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator</nowiki>], ''2016 Ieee Sensors''. [https://doi.org/10.1109/icsens.2016.7808403 https://doi.org/10.1109/icsens.2016.7808403]
* Banerji, Saoni & Chiva, Josep (2016) [http://hdl.handle.net/2117/84731 <nowiki>Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform</nowiki>], ''JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts''.
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2015) [https://doi.org/10.1109/dtip.2015.7160984 <nowiki>Optimization of parameters for CMOS MEMS resonant pressure sensors</nowiki>], ''2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)''. [https://doi.org/10.1109/dtip.2015.7160984 https://doi.org/10.1109/dtip.2015.7160984]
* Saoni Banerji, Wang Ling Goh, Jia Hao Cheong, Minkyu Je (2013) [https://doi.org/10.1109/imws-bio.2013.6756176 <nowiki>CMUT ultrasonic power link front-end for wireless power transfer deep in body</nowiki>], ''2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO)''. [https://doi.org/10.1109/imws-bio.2013.6756176 https://doi.org/10.1109/imws-bio.2013.6756176]
* S Banerji, S Kumar (2011) Face Recognition Using K2DSPCA, ''International Conference on Information and Network Technology''.

== PhD thesis ==
*Banerji,S (2018), [https://dialnet.unirioja.es/servlet/tesis?codigo=258747<nowiki> Development of System-on-Chip CMOS-MEMS Pressure Sensors, 2018</nowiki>], Universitat Politècnica de Catalunya
== MSc thesis ==
*Banerji,S (2012), [https://repository.ntu.edu.sg/handle/10356/59966<nowiki> Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>], Nanyang Technological University

[[Category:PI]]

User:Saoni

2020-10-26T08:01:08Z

Saoni: /* Journal Articles */

{{UserProfile |
fullname=Saoni Banerji |
picture= SaoniBanerji.jpg |
mobile=+372 5784-7716 |
email=saoni.banerji@ut.ee |
skype=sb.upc |
researcherid=X-5452-2019 |
orcid=0000-0001-8221-9820 |
gscholar=https://scholar.google.es/citations?user=CBt92d8AAAAJ&hl=en |
etis=https://www.etis.ee/CV/Saoni_Banerji |
other=
{{UserProfileItem | LinkedIn | [https://www.linkedin.com/in/saonibanerji Saoni Banerji] }}

{{UserProfileItem | Position | Research Fellow (Microfabrication) }}

{{UserProfileItem | Research Group | {{ResearchGroupCard | name=Mixed Signal Microelectronics | link=Mixed Signal Microelectronics}} }}
}}

== Publications ==

=== Journal Articles ===
* Mata-Hernandez, D.; Fernández, D.; Banerji, S.; Madrenas, J. (2020) [https://www.mdpi.com/1424-8220/20/21/6037 <nowiki>Resonant MEMS Pressure Sensor in 180 nm CMOS Technology Obtained by BEOL Isotropic Etching</nowiki>], ''Sensors 2020''. [https://www.mdpi.com/1424-8220/20/21/6037 https://www.mdpi.com/1424-8220/20/21/6037]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2018) [https://doi.org/10.1109/jsen.2018.2797526 <nowiki>A Comprehensive High-Level Model for CMOS-MEMS Resonators</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2018.2797526 https://doi.org/10.1109/jsen.2018.2797526]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2017) [https://doi.org/10.1109/jsen.2017.2747140 <nowiki>Characterization of CMOS-MEMS Resonant Pressure Sensors</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2017.2747140 https://doi.org/10.1109/jsen.2017.2747140]
* Saoni Banerji, Piotr Michalik, Daniel Fernández, Jordi Madrenas, Albert Mola, Josep Montanyà (2017) [https://doi.org/10.1007/s00542-016-2878-3 <nowiki>CMOS-MEMS resonant pressure sensors: optimization and validation through comparative analysis</nowiki>], ''Microsystem Technologies''. [https://doi.org/10.1007/s00542-016-2878-3 https://doi.org/10.1007/s00542-016-2878-3]
* Saoni Banerji, R.Senthil Kumar (2010) Diagnosis of Systems Via Wavelet Transform Analysis based on Time Frequency Representations , ''Int. J. of Recent Trends in Engineering and Technology''.

=== Conference Papers ===

* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2016) [https://doi.org/10.1109/icsens.2016.7808403 <nowiki>Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator</nowiki>], ''2016 Ieee Sensors''. [https://doi.org/10.1109/icsens.2016.7808403 https://doi.org/10.1109/icsens.2016.7808403]
* Banerji, Saoni & Chiva, Josep (2016) [http://hdl.handle.net/2117/84731 <nowiki>Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform</nowiki>], ''JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts''.
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2015) [https://doi.org/10.1109/dtip.2015.7160984 <nowiki>Optimization of parameters for CMOS MEMS resonant pressure sensors</nowiki>], ''2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)''. [https://doi.org/10.1109/dtip.2015.7160984 https://doi.org/10.1109/dtip.2015.7160984]
* Saoni Banerji, Wang Ling Goh, Jia Hao Cheong, Minkyu Je (2013) [https://doi.org/10.1109/imws-bio.2013.6756176 <nowiki>CMUT ultrasonic power link front-end for wireless power transfer deep in body</nowiki>], ''2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO)''. [https://doi.org/10.1109/imws-bio.2013.6756176 https://doi.org/10.1109/imws-bio.2013.6756176]
* S Banerji, S Kumar (2011) Face Recognition Using K2DSPCA, ''International Conference on Information and Network Technology''.

=== Other ===

* Banerji, Saoni and Ling, Goh Wang and Cheong, Jia Hao and Je, Minkyu (2012) [https://repository.ntu.edu.sg/handle/10356/59966 <nowiki>Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>].

== PhD thesis ==
*Banerji,S (2018), [https://dialnet.unirioja.es/servlet/tesis?codigo=258747<nowiki> Development of System-on-Chip CMOS-MEMS Pressure Sensors, 2018</nowiki>], Universitat Politècnica de Catalunya
== MSc thesis ==
*Banerji,S (2012), [https://repository.ntu.edu.sg/handle/10356/59966<nowiki> Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>], Nanyang Technological University

[[Category:PI]]

User:Saoni

2020-08-05T07:28:00Z

Saoni:

{{UserProfile |
fullname=Saoni Banerji |
picture= SaoniBanerji.jpg |
mobile=+372 5784-7716 |
email=saoni.banerji@ut.ee |
skype=sb.upc |
researcherid=X-5452-2019 |
orcid=0000-0001-8221-9820 |
gscholar=https://scholar.google.es/citations?user=CBt92d8AAAAJ&hl=en |
etis=https://www.etis.ee/CV/Saoni_Banerji |
other=
{{UserProfileItem | LinkedIn | [https://www.linkedin.com/in/saonibanerji Saoni Banerji] }}

{{UserProfileItem | Position | Research Fellow (Microfabrication) }}

{{UserProfileItem | Research Group | {{ResearchGroupCard | name=Mixed Signal Microelectronics | link=Mixed Signal Microelectronics}} }}
}}

== Publications ==

=== Journal Articles ===

* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2018) [https://doi.org/10.1109/jsen.2018.2797526 <nowiki>A Comprehensive High-Level Model for CMOS-MEMS Resonators</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2018.2797526 https://doi.org/10.1109/jsen.2018.2797526]
* Saoni Banerji, Daniel Fernandez, Jordi Madrenas (2017) [https://doi.org/10.1109/jsen.2017.2747140 <nowiki>Characterization of CMOS-MEMS Resonant Pressure Sensors</nowiki>], ''IEEE Sensors Journal''. [https://doi.org/10.1109/jsen.2017.2747140 https://doi.org/10.1109/jsen.2017.2747140]
* Saoni Banerji, Piotr Michalik, Daniel Fernández, Jordi Madrenas, Albert Mola, Josep Montanyà (2017) [https://doi.org/10.1007/s00542-016-2878-3 <nowiki>CMOS-MEMS resonant pressure sensors: optimization and validation through comparative analysis</nowiki>], ''Microsystem Technologies''. [https://doi.org/10.1007/s00542-016-2878-3 https://doi.org/10.1007/s00542-016-2878-3]
* Saoni Banerji, R.Senthil Kumar (2010) Diagnosis of Systems Via Wavelet Transform Analysis based on Time Frequency Representations , ''Int. J. of Recent Trends in Engineering and Technology''.

=== Conference Papers ===

* Banerji, Saoni & Chiva, Josep (2016) [http://hdl.handle.net/2117/84731 <nowiki>Under pressure? Don’t lose direction! Smart sensors: Development of CMOS and MEMS on the same platform</nowiki>], ''JIPI 2016: 4a Jornada d’Investigadors Predoctorals Interdisciplinària: Barcelona: Febrer 2, 2016: book of abstracts''.
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2016) [https://doi.org/10.1109/icsens.2016.7808403 <nowiki>Temperature and pressure characterization of the quality factor in a CMOS-MEMS resonator</nowiki>], ''2016 Ieee Sensors''. [https://doi.org/10.1109/icsens.2016.7808403 https://doi.org/10.1109/icsens.2016.7808403]
* Saoni Banerji, Jordi Madrenas, Daniel Fernandez (2015) [https://doi.org/10.1109/dtip.2015.7160984 <nowiki>Optimization of parameters for CMOS MEMS resonant pressure sensors</nowiki>], ''2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP)''. [https://doi.org/10.1109/dtip.2015.7160984 https://doi.org/10.1109/dtip.2015.7160984]
* Saoni Banerji, Wang Ling Goh, Jia Hao Cheong, Minkyu Je (2013) [https://doi.org/10.1109/imws-bio.2013.6756176 <nowiki>CMUT ultrasonic power link front-end for wireless power transfer deep in body</nowiki>], ''2013 IEEE MTT-S International Microwave Workshop Series on RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-BIO)''. [https://doi.org/10.1109/imws-bio.2013.6756176 https://doi.org/10.1109/imws-bio.2013.6756176]
* S Banerji, S Kumar (2011) Face Recognition Using K2DSPCA, ''International Conference on Information and Network Technology''.

=== Other ===

* Banerji, Saoni and Ling, Goh Wang and Cheong, Jia Hao and Je, Minkyu (2012) [https://repository.ntu.edu.sg/handle/10356/59966 <nowiki>Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>].

== PhD thesis ==
*Banerji,S (2018), [https://dialnet.unirioja.es/servlet/tesis?codigo=258747<nowiki> Development of System-on-Chip CMOS-MEMS Pressure Sensors, 2018</nowiki>], Universitat Politècnica de Catalunya
== MSc thesis ==
*Banerji,S (2012), [https://repository.ntu.edu.sg/handle/10356/59966<nowiki> Ultrasonic Link IC for Wireless Power and Data Transfer Deep in Body</nowiki>], Nanyang Technological University

[[Category:PI]]

People

2019-09-19T15:32:54Z

Saoni: /* Staff */

{{DISPLAYTITLE:The Lab's Team}} __NOTOC__
== Staff ==

{{Team|
{{TeamMember|Alvo|Alvo Aabloo|professor, head of the lab (polymer materials)}}
{{TeamMember|Karl|Karl Kruusamäe|associate professor of robotics engineering, [[IMS robotics]]}}
{{TeamMember|Indrekm|Indrek Must|associate professor}}
{{TeamMember|Aks1812|Arun Kumar Singh|associate professor of collaborative robotics, [[IMS robotics]]}}
{{TeamMember|Tarmo|Tarmo Tamm|senior researcher}}
{{TeamMember|Vahur|Vahur Zadin|senior researcher (finite element modelling, molecular dynamics, high electric fields, CERN)}}
{{TeamMember|Heiki|Heiki Kasemägi|senior researcher (ion-conducting polymer, computer simulations) & Computer engineering study programme manager}}
{{TeamMember|Gajanee|Kaija Põhako-Esko|researcher, Marie Skłodowska-Curie fellow (chemistry, organic synthesis, ionic liquids)}}
{{TeamMember|Urmas|Urmas Johanson|researcher (electrochemistry)}}
{{TeamMember|Annaliisa|Anna-Liisa Peikolainen|researcher (carbon materials, chemistry)}}
{{TeamMember|Janno|Janno Torop|researcher (flow cell supercaps, carbon materials)}}
{{TeamMember|Saoni|Saoni Banerji| research fellow (CMOS MEMS sensors)}}
{{TeamMember|Morteza.Daneshmand|Morteza Daneshmand|research fellow (human-robot collaboration in manufacturing), [[IMS robotics]]}}
{{TeamMember|Artur|Artur Abels|teaching assistant (digital electronics)}}
{{TeamMember|Roman|Roman Leinus|engineer (robotics)}}
{{TeamMember|Teet|Teet Tilk|engineer (electronics)}}
{{TeamMember|Tauri|Tauri Tätte|engineer (robotics)}}
{{TeamMember|Ramon.rantsus|Ramon Rantsus|educational robotics project manager (education)}}
{{TeamMember|Mariana|Mariana Raudsepp|assistant}}
{{TeamMember|Kadri.tonnisson|Kadri Tõnnisson|project coordinator}}
{{TeamMember|Ingridre|Ingrid Rebane|project assistant}}
}}

== PhD Students ==

{{Team|
{{TeamMember|Grecebo|Inga Põldsalu|Ph.D student (microfabrication, EAP); supervisor: A.-L. Peikolainen}}
{{TeamMember|Arko|Arko Kesküla|PhD student (ionic liquid polymerization); supervisors: A.-L. Peikolainen, U. Mäeorg}}
{{TeamMember|kaur|Kaur Leemets|PhD student (printable sensors)}}
{{TeamMember|Zane|Zane Zondaka|PhD student (Conductive polymers carbon composites)}}
{{TeamMember|Sunjainakshatharan|Sunjai Nakshatharan|PhD student (Modelling and Control of Ionic Polymer Actuators)}}
{{TeamMember|Robertvalner|Robert Valner|PhD student (robotics, [[IMS robotics]])}}
{{TeamMember|Kivilo|Alo Kivilo|PhD student (Conducting polymers)}}
{{TeamMember|faiza|Faiza Summer|PhD student (Flow-capacitor)}}
{{TeamMember|Pille|Pille Rinne|PhD student}}
{{TeamMember|madis.harjo|Madis Harjo|PhD student (nanocarbon composites)}}
{{TeamMember|Fred|Fred Elhi|PhD student (microfabrication, EAP)}}
{{TeamMember|hans_priks|Hans Priks|PhD student (conducting polymers)}}
{{TeamMember|Kristiankuppart|Kristian Kuppart|PhD student (MD in high electric fields)}}
{{TeamMember|karlkaru|Karl Karu|PhD student}}
{{TeamMember|Aru.arvndn|Aravindan Sooryanarain|PhD student (robot manipulators, [[IMS robotics]])}}
{{TeamMember|Helena.nulk|Helena Nulk|PhD student (collaborative robotics, [[IMS robotics]])}}
}}

==Students==

{{Team|
{{TeamMember|georgniit|Georg Niit|student}}
{{TeamMember|markus|Markus Loide|student}}
{{TeamMember|aare|Robert Aare|student (FEM simulations, TTM)}}
{{TeamMember|Liivak|Martin Liivak|student (FEM simulations of 3D-MB's)}}
{{TeamMember|Priit.poldmaa|Priit Põldmaa|student}}
{{TeamMember|raunoumborg|Rauno Umborg|student (computer engineering)}}
{{TeamMember|Kaarelsiimut|Kaarel Siimut|student (aerated concrete)}}
{{TeamMember|Ingmar.laan|Ingmar Laan|student (ionic polymer actuators)}}
{{TeamMember|Johannes.muru|Johannes Muru|student}}
{{TeamMember|Hermanratas|Herman Klas Ratas|student}}
{{TeamMember|Kadriannvaldur|Kadri-Ann Valdur|student (PPy actuators)}}
{{TeamMember|Ats.aasmaa|Ats Aasmaa|student (modelling of microbatteries)}}
{{TeamMember|Houman.masnavi|Houman Masnavi|student (robotics and computer engineering)}}
{{TeamMember|Phuong.nguyen|Phuong Nguyen|student (FEM simulations)}}
}}

==Colleagues==

{{Team|
{{TeamMember|Rosin|Margus Rosin|lecturer (FPGA)}}
{{TeamMember|Frkaasik|Friedrich Kaasik|ex-PhD student (carbon-polymer actuators)}}
{{TeamMember|Heilo|Heilo Altin|ex-PhD student (educational robotics)}}
{{TeamMember|Arturt|Artur Tamm|postdoc at LLNL [https://qsg.llnl.gov/node/89.html QSG LLNL]}}
{{TeamMember|Aleksander|Aleksander Tõnnisson|[http://buildit.ee Buildit] (Hardware accelerator) CEO}}
{{TeamMember|Veix|Veiko Vunder|postdoc at University of Texas, Austin}}
{{TeamMember|katlin.rohtlaid|Kätlin Rohtlaid|PhD student at Cergy-Pontoise University (EAP fabrication)}}
{{TeamMember|Grecebo|Inga Põldsalu|postdoc at University of Oslo, [https://www.med.uio.no/ncmm/english/people/aca/inga/index.html Bionanotechnology and Membrane Systems]}}
}}

Mixed Signal Microelectronics

2019-09-13T14:41:09Z

Saoni:

[[File:Logo.png|600px|center]]
==Why CMOS-MEMS?==
*Reduced Parasitic degradation
*Mainstream processes:High volume production
*Most scalable and monolithic
*Targeted for consumer electronics (primarily)
*Less degrees of freedom (Not the best solution!)

==Our Vision ==
We strive to adapt and develop smart ways for our MEMS materials in standard CMOS technology for optimized ASIC design targeted for biomedical and consumer applications.

==Capabilities==
=== Methodology ===
Typically, we follow the standard procedure to develop our devices:
*Device design, Modeling and Optimization
*Black-box modeling and co-simulation with electronics (transistor-level design)
*Device Fabrication and Tape-out (corresponding to the technology node)
*Characterization (in terms of ambient and electrical factors) for optimal operation
*Convergence of modeling and experimental results for validation

<gallery caption="A Typical workflow for CMOS MEMS Pressure sensor" mode=packed heights=300px style="text-align:left">>
File:Pullin.png|300px|FEM of CMOS-MEMS resonator at Pull-in
File:Set-up.png|300px|Block diagram of experimental set-up for device characterization
File:Psensor.jpg|300px|View of Monolithic CMOS-MEMS Pressure sensor under scanning electron microscope
</gallery>

=== Tools we use ===
====Software====
*Modeling and Optimization: [https://se.mathworks.com/products/matlab.html MATLAB], [https://www.comsol.com COMSOL Multiphysics]
*Transistor level Design and Layout: [https://www.cadence.com Cadence]

==== Equipment ====
*SEM
*FIB
*Microprobe setup
*Impedance Analyzer

== Primary contacts ==

{{Team|
{{TeamMember|Saoni|Saoni Banerji| postdoc researcher of CMOS MEMS sensors}}
{{TeamMember|Alvo|Alvo Aabloo| professor, head of the IMS lab}}
}}

== Portfolio ==
===Research Topics===
Possible interesting topics are:
*MEMS-Based Sensors for Human Centered Applications (CMOS MEMS Based Micro Biotronics)
*Monolithic sensors in CMOS technologies (targeted towards consumer electronics)

=== Selected Publications ===

*S. Banerji, D. Fernández and J. Madrenas, (2018) {{doi-inline|https://doi.org/10.1109/JSEN.2018.2797526|A Comprehensive High-Level Model for CMOS-MEMS Resonators}},'' in IEEE Sensors Journal, vol. 18, no. 7, pp. 2632-2640, April 1, 2018''.
*S. Banerji, D. Fernández and J. Madrenas, (2017) {{doi-inline|https://doi.org/10.1109/JSEN.2017.2747140|Characterization of CMOS-MEMS Resonant Pressure Sensors}},'' in IEEE Sensors Journal, vol. 17, no. 20, pp. 6653-6661, Oct.15, 2017''.
*S. Banerji, P. Michalik, D. Fernández, J. Madrenas, A. Mola, J. Montanyà,(2017) {{doi-inline|https://doi.org/10.1007/s00542-016-2878-3|CMOS-MEMS resonant pressure sensors: Optimization and validation through comparative analysis}},'' , Microsyst. Technol., vol. 23, no. 9, pp. 3909-3925, 2016''.

File:Logo.png

2019-09-13T14:37:51Z

Saoni:

logo

File:IMS Mixed signal Microelectronics .png

2019-09-13T14:30:39Z

Saoni:

Logo

File:IMS MsM Logo.png

2019-09-13T14:25:19Z

Saoni:

Logo

File:IMS Mixed Signal Microelectronics.png

2019-09-13T14:18:13Z

Saoni:

Logo

Mixed Signal Microelectronics

2019-09-13T14:02:20Z

Saoni:

[[File:SoC integration.png|thumb|right]]

==Why CMOS-MEMS?==
*Reduced Parasitic degradation
*Mainstream processes:High volume production
*Most scalable and monolithic
*Targeted for consumer electronics (primarily)
*Less degrees of freedom (Not the best solution!)

==Our Vision ==
We strive to adapt and develop smart ways for our MEMS materials in standard CMOS technology for optimized ASIC design targeted for biomedical and consumer applications.

==Capabilities==
=== Methodology ===
Typically, we follow the standard procedure to develop our devices:
*Device design, Modeling and Optimization
*Black-box modeling and co-simulation with electronics (transistor-level design)
*Device Fabrication and Tape-out (corresponding to the technology node)
*Characterization (in terms of ambient and electrical factors) for optimal operation
*Convergence of modeling and experimental results for validation

<gallery caption="A Typical workflow for CMOS MEMS Pressure sensor" mode=packed heights=300px style="text-align:left">>
File:Pullin.png|300px|FEM of CMOS-MEMS resonator at Pull-in
File:Set-up.png|300px|Block diagram of experimental set-up for device characterization
File:Psensor.jpg|300px|View of Monolithic CMOS-MEMS Pressure sensor under scanning electron microscope
</gallery>

=== Tools we use ===
====Software====
*Modeling and Optimization: [https://se.mathworks.com/products/matlab.html MATLAB], [https://www.comsol.com COMSOL Multiphysics]
*Transistor level Design and Layout: [https://www.cadence.com Cadence]

==== Equipment ====
*SEM
*FIB
*Microprobe setup
*Impedance Analyzer

== Primary contacts ==

{{Team|
{{TeamMember|Saoni|Saoni Banerji| postdoc researcher of CMOS MEMS sensors}}
{{TeamMember|Alvo|Alvo Aabloo| professor, head of the IMS lab}}
}}

== Portfolio ==
===Research Topics===
Possible interesting topics are:
*MEMS-Based Sensors for Human Centered Applications (CMOS MEMS Based Micro Biotronics)
*Monolithic sensors in CMOS technologies (targeted towards consumer electronics)

=== Selected Publications ===

*S. Banerji, D. Fernández and J. Madrenas, (2018) {{doi-inline|https://doi.org/10.1109/JSEN.2018.2797526|A Comprehensive High-Level Model for CMOS-MEMS Resonators}},'' in IEEE Sensors Journal, vol. 18, no. 7, pp. 2632-2640, April 1, 2018''.
*S. Banerji, D. Fernández and J. Madrenas, (2017) {{doi-inline|https://doi.org/10.1109/JSEN.2017.2747140|Characterization of CMOS-MEMS Resonant Pressure Sensors}},'' in IEEE Sensors Journal, vol. 17, no. 20, pp. 6653-6661, Oct.15, 2017''.
*S. Banerji, P. Michalik, D. Fernández, J. Madrenas, A. Mola, J. Montanyà,(2017) {{doi-inline|https://doi.org/10.1007/s00542-016-2878-3|CMOS-MEMS resonant pressure sensors: Optimization and validation through comparative analysis}},'' , Microsyst. Technol., vol. 23, no. 9, pp. 3909-3925, 2016''.

File:WORKFLOW.png

2019-09-13T10:36:49Z

Saoni: Saoni uploaded a new version of File:WORKFLOW.png

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Set-up.png

2019-09-13T10:10:09Z

Saoni:

Experimental set-up for characterization of the CMOS-MEMS pressure sensor

File:Experimental setup.png

2019-09-13T10:04:46Z

Saoni:

experimental setup for characterization

File:Pullin.png

2019-09-13T10:00:26Z

Saoni:

FEM simulations showing pull-in

File:Psensor.jpg

2019-09-13T09:51:11Z

Saoni:

Scanning Electron Microscope (SEM) micrograph of the fabricated
CMOS pressure sensor.

File:Workflow.png

2019-09-13T09:47:06Z

Saoni: Saoni reverted File:Workflow.png to an old version

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Workflow.png

2019-09-13T09:46:26Z

Saoni: Saoni uploaded a new version of File:Workflow.png

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Workflow.png

2019-09-13T08:32:52Z

Saoni: Saoni uploaded a new version of File:Workflow.png

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Pressure sensor.png

2019-09-13T08:24:28Z

Saoni:

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Workflow.png

2019-09-13T08:20:01Z

Saoni:

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:WORKFLOW.png

2019-09-13T08:17:28Z

Saoni:

Demonstration of workflow for CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:Custom Design Flow .png

2019-09-13T08:14:50Z

Saoni:

Demonstration of a custom workflow for a CMOS MEMS pressure sensor fabricated in IHP SG25 process

File:SoC integration.png

2019-09-13T07:37:15Z

Saoni:

System-on-chip solution (MEMS and IC integration)

File:Cmosmems psensor.png

2019-09-12T11:22:37Z

Saoni:

SEM Image of CMOS MEMS pressure sensor

File:1.MicroProbestation 1540x800 748KB.jpg

2019-09-11T08:26:06Z

Saoni:

This photo depicts a microprobe station to test the dice on the wafer

User:Saoni

2019-09-04T16:29:32Z

Saoni:

User:Saoni

2019-09-04T16:22:54Z

Saoni:

File:SaoniBanerji.jpg

2019-09-04T15:09:56Z

Saoni:

picture

File:Sbanerji.jpg

2019-09-04T15:04:19Z

Saoni:

picture

People

2018-08-28T10:27:25Z

Saoni: /* Staff */

User:Saoni

2018-08-27T13:15:51Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

[[File:SBanerji.jpg|thumb|200px]]

Research Fellow (Microfabrication)

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

User:Saoni

2018-08-27T13:07:26Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

[[File:SBanerji.jpg|thumb|200px]]

Research Fellow

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

User:Saoni

2018-08-27T12:59:58Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

[[File:SBanerji.jpg|200px]]

Research Fellow

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

User:Saoni

2018-08-27T12:58:22Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==
[[File:SBanerji|left]]
Research Fellow

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

File:SBanerji.jpg

2018-08-27T12:54:27Z

Saoni:

Photo

User:Saoni

2018-08-27T12:15:28Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

Research Fellow

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

User:Saoni

2018-08-27T12:13:25Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

Research Fellow

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee

User:Saoni

2018-08-27T12:03:39Z

Saoni: /* Saoni Banerji */

== Saoni Banerji ==

'''Phone:''' +372 5784 7716 
'''Skype:''' sb.upc 
'''E-mail:''' saoni.banerji@ut.ee